Acoustic energy harvesting using an electromechanical Helmholtz resonator

This paper presents the development of an acoustic energy harvester using an electromechanical Helmholtz resonator (EMHR). The EMHR consists of an orifice, cavity, and a piezoelectric diaphragm. Acoustic energy is converted to mechanical energy when sound incident on the orifice generates an oscillatory pressure in the cavity, which in turns causes the vibration of the diaphragm. The conversion of acoustic energy to electrical energy is achieved via piezoelectric transduction in the diaphragm of the EMHR. Moreover, the diaphragm is coupled with energy reclamation circuitry to increase the efficiency of the energy conversion. Lumped element modeling of the EMHR is used to provide physical insight into the coupled energy domain dynamics governing the energy reclamation process. The feasibility of acoustic energy reclamation using an EMHR is demonstrated in a plane wave tube for two power converter topologies. The first is comprised of only a rectifier, and the second uses a rectifier connected to a flyback converter to improve load matching. Experimental results indicate that approximately 30 mW of output power is harvested for an incident sound pressure level of 160 dB with a flyback converter. Such power level is sufficient to power a variety of low power electronic devices.     

Interaction of highly charged ions with carbon-based materials using Kobe EBIS

Interaction of highly charged ions (HCIs) with surfaces produce various specific phenomena as a consequence of the potential energy that HCI possesses. In the present study, we have observed photon emission, structural, magnetic, and electronic modification on various carbon-based materials such as carbon nanotube by the impact of HCIs using an electron beam ion source named Kobe EBIS installed at the Kobe University. In order to study the potential effect, HCIs of Ar^q+ (q = 6–16) with the intensity of 0.1–1 nA are projected on the surface with a constant kinetic energy (16 keV). For photon emission measurements, we observed spatial and spectral distribution of visible light emission from the surface during irradiation with HCIs. On the other hand, the structural modification of multi-walled carbon nanotubes (MWCNTs) irradiated with HCIs has been analyzed using a transmission electron microscopy and Raman spectroscopy. Irradiation effects on the resistivity of single MWCNT supported on micrometer scale bridge pattern were also measured. We have also measured magnetic structure of highly oriented pyrolytic graphite irradiated with HCIs using electron spin resonance at low temperature. At the present paper, we will review our recent experimental results on the interaction of HCI with various carbon-based materials.     

Optimizing Charge Switching in Membrane Lytic Peptides for Endosomal Release of Biomacromolecules

Endocytic pathways are practical routes for the intracellular delivery of biomacromolecules. Along with this, effective strategies for endosomal cargo release into the cytosol are desired to achieve successful delivery. Focusing on compositional differences between the cell and endosomal membranes and the pH decrease within endosomes, we designed the lipid-sensitive and pH-responsive endosome-lytic peptide HAad. This peptide contains aminoadipic acid (Aad) residues, which serve as a safety catch for preferential permeabilization of endosomal membranes over cell membranes, and His-to-Ala substitutions enhance the endosomolytic activity. The ability of HAad to destabilize endosomal membranes was supported by model studies using large unilamellar vesicles (LUVs) and by increased intracellular delivery of biomacromolecules (including antibodies) into live cells. Cerebral ventricle injection of Cre recombinase with HAad led to Cre/loxP recombination in a mouse model, thus demonstrating potential applicability of HAad in vivo.     

Non-secular part of nuclear dipolar broadening detected by zero-field spin relaxation of positive muon

The zero-field spin relaxation function of μ⁺ observed in ZrH₂ has revealed that the second moment of the nuclear dipolar broadening is five times larger than the high-field value. This experiment clearly demonstrates the recovery of the non-secular part of dipolar interaction between unlike spins. A general expression of zero-field relaxation function is presented to account for a slow modulation of random fields on μ⁺ found at room temperature.     

Recent results at LULI on fast electron transport with and without guiding cone in the context of fast ignitor

We present experimental and numerical results obtained at LULI (Laboratoire pour l’Utilisation des Lasers intenses) on propagation and energy deposition of laser-generated fast electrons into conical targets. The experimental measurements were performed by means of several diagnostics in order to assess the predicted benefit of conical targets over standard planar ones. Various configurations have been tried, regarding the laser parameters with the aim of optimizing the laser-to-target coupling. Our best results have been obtained when the laser was frequency-doubled at 0.53 μm, corresponding to interaction conditions without laser pedestal due to the ASE (Amplified Spontaneous Emission). Our data pinpoint the detrimental influence of the pre-plasma generated by the laser pedestal at 1.057 μm, whose confinement is enhanced in conical geometry as evidenced by shadowgraphic measurements which is also confirmed by 2D Cu-Ka transverse images obtained from Cu cones. The consequence is the filling of the cone, preventing the laser beam from efficiently reaching the cone tip. These experimental results are compared to 2D PIC simulations modeling of the laser-cone interaction.     

Polarization-maintaining photonic crystal fibers with near-zero flattened dispersion in 1.06 μm waveband for medical applications

In this paper we present the design of a modified hexagonal photonic crystal fiber (PCF) having high birefringence and a near-zero flattened dispersion. Using the finite-difference method (FDM), it is shown that the proposed multiple Gedoped core hexagonal PCF exhibits a high birefringence of order 10⁻³ and a nearly zero flattened dispersion in the optical coherence tomography (OCT) waveband. In addition, the proposed PCF has a confinement loss of less than 10⁻⁸ dB/m at 1.06 μm. PCFs with such properties are considered suitable for both endoscopic OCT and other experimental setups employing 1.06 μm lasers.     

Tuning membership functions of kernel fuzzy classifiers by maximizing margins

We propose two methods for tuning membership functions of a kernel fuzzy classifier based on the idea of SVM (support vector machine) training. We assume that in a kernel fuzzy classifier a fuzzy rule is defined for each class in the feature space. In the first method, we tune the slopes of the membership functions at the same time so that the margin between classes is maximized under the constraints that the degree of membership to which a data sample belongs is the maximum among all the classes. This method is similar to a linear all-at-once SVM. We call this AAO tuning. In the second method, we tune the membership function of a class one at a time. Namely, for a class the slope of the associated membership function is tuned so that the margin between the class and the remaining classes is maximized under the constraints that the degrees of membership for the data belonging to the class are large and those for the remaining data are small. This method is similar to a linear one-against-all SVM. This is called OAA tuning. According to the computer experiment for fuzzy classifiers based on kernel discriminant analysis and those with ellipsoidal regions, usually both methods improve classification performance by tuning membership functions and classification performance by AAO tuning is slightly better than that by OAA tuning.     

Total synthesis and biological evaluation of pacidamycin D and its 3'-hydroxy analogue

Full details of the total synthesis of pacidamycin D (4) and its 3'-hydroxy analogue 32 are described. The chemically labile Z-oxyacyl enamide moiety is the most challenging chemical structure found in uridylpeptide natural products. Key elements of our approach to the synthesis of 4 include the efficient and stereocontrolled construction of the Z-oxyvinyl halides 6 and 7 and their copper-catalyzed cross-coupling with the tetrapeptide carboxamide 5, a thermally unstable compound containing a number of potentially reactive functional groups. This synthetic route also allowed us to easily prepare 3'-hydroxy analogue 32. The assemblage by cross-coupling of the Z-oxyvinyl halide 6 and the carboxamide 5 at a late stage of the synthesis provided ready access to a range of uridylpeptide antibiotics and their analogues, despite their inherent labile nature with potential epimerization, simply by altering the tetrapeptide moiety.     

Systematic study of protein detection mechanism of self-assembling 19F NMR/MRI nanoprobes toward rational design and improved sensitivity

(19)F NMR/MRI probe is expected to be a powerful tool for selective sensing of biologically active agents owing to its high sensitivity and no background signals in live bodies. We have recently reported a unique supramolecular strategy for specific protein detection using a protein ligand-tethered self-assembling (19)F probe. This method is based on a recognition-driven disassembly of the nanoprobes, which induced a clear turn-on signal of (19)F NMR/MRI. In the present study, we conducted a systematic investigation of the relationship between structure and properties of the probe to elucidate the mechanism of this turn-on (19)F NMR sensing in detail. Newly synthesized (19)F probes showed three distinct behaviors in response to the target protein: off/on, always-on, and always-off modes. We clearly demonstrated that these differences in protein response could be explained by differences in the stability of the probe aggregates and that "moderate stability" of the aggregates produced an ideal turn-on response in protein detection. We also successfully controlled the aggregate stability by changing the hydrophobicity/hydrophilicity balance of the probes. The detailed understanding of the detection mechanism allowed us to rationally design a turn-on (19)F NMR probe with improved sensitivity, giving a higher image intensity for the target protein in (19)F MRI.