Oxidative entry to α-oxy N-acyl aminals and hemiaminals: efficient formation of 2-(N-acylaminal) substituted tetrahydropyrans

An efficient new method to synthesize α-oxy N-acyl aminals and hemiaminals in a single step from readily synthesized N-acyl enamines has been developed using PhI(OAc)₂ as the oxidant. The reaction conditions are very mild and the products are obtained in good yields (65-92%). A possible mechanistic pathway is laid out.     

A SAPO-11 Silicoaluminophosphate Molecular Sieve with Stable Crystal Structure

A SAPO-11 silicoaluminophosphate molecular sieve with stable crystal structure was synthesized for the first time. After removing template by calcination, its crystal space group still retains Icm2 which the as-synthesized has. The catalyst deriving from the present SAPO-I 1 materials shows higher isomerization selectivity and higher paraffin hydroisomerization yield than those reported elsewhere.     

四氯合锌酸二（正十二烷基铵）晶体相变机理的付里叶变换红外光谱研究

采用变温红外光谱研究了层结构标题配合物的固。固相变机理；相变主要与烷烃链和－ＮＨ＿３极性端基结构变化有关，主要来源于烷烃链的堆积结构和构象的有序。无序变化，同时伴有Ｎ－Ｈ…Ｃｌ氢键强度的降低，由于在高温烃链产生ＧＴＧ＋ＧＴＧ＇和临近端基的ＴＧ构象以及ＧＧ链段，链大量扭曲，形成了烷烃链的“熔化”态，发现同相和异相Ｃ－Ｃ伸缩振动频率对烷烃“链熔化”相变很敏感，可用于表征烷烃链的链长变化。     

Carbon anode materials from polysiloxanes for lithium ion batteries

Three kinds of silicon-containing disordered carbons have been prepared by pyrolysis of polysiloxanes with different amounts of phenyl side groups. X-ray powder diffraction, X-ray photoelectron spectroscopy and electrochemical capacity measurements were performed to study their behaviors. Graphite crystallites, micropores, and silicon species affect their electrochemical performances. All of them present high reversible capacities, >372 mAh/g. Since the graphite crystallites are very small, they contribute very little to reversible capacity. The number of micropores produced by gas emission during the heat-treatment process decides whether they exhibit reversible capacity. Si mainly exists in the form C–Si–O and influences the irreversible capacity. There is no evident capacity fading in the first ten cycles, indicating promising properties for these disordered carbons.     

Quinazolines and 1,4-benzodiazepines. XLVI. Photochemistry of nitrones and oxaziridines

The cyclic nitrones 7-chloro-1,3-dihydro-5-phenyl-2H-1,4-benzodiazepin-2-one 4-oxide ( 5a ) and 1,3-dihydro-7-methylthio-5-phenyl-2H-1,4-benzodiazepin-2-one 4-oxide ( 5b ) are photoisomerized to readily isolable oxaziridines, 7-chloro-4,5-epoxy-5-phenyl-1,3,4–5-tetrahydro-2H-1,4-benzodiazepin-2-one ( 6a ) and 4,5-epoxy-5-phenyl-1,3,4,5-tetrahydro-7-methylthio-2H-1,4-benzo-diazepin-2-one ( 6b ). Oxaziridine 6b upon further irradiation gave ring expansion and ring contraction products, 4,6-dihydro-2-phenyl-9-methylthio-5H-1,3,6-benzoxadiazocin-5-one ( 7b ) and 4-benzoyl-3,4-dihydro-6-methylthioquinoxalin-2(1H)-one ( 8b ) respectively. The ring contraction product, 4-benzoyl-6-chloro-3,4-dihydroquinoxalin-2(1H)-one ( 8a ), was obtained from irradiation of oxaziridine 6a .     

Recognition of single nucleotide polymorphisms using scanning potential hairpin denaturation

Conventional single nucleotide polymorphism (SNP) assays, which based their detection on the stringency or temperature of the washing buffers, have encountered difficulties to distinguish a single base pair mismatch from a perfect match. In this study, scanning potential hairpin denaturation (SPHD) has been developed to detect SNP in a sensitive and reliable manner. Combined with hairpin oligonucleotide probes, scanning surface electric potential was used to induce a dissociation of double-stranded DNA around a unique "melting potential" (Vm), and it generated a high-contrast SNP recognition signal. A 21 base pair p53 gene segment was used to test this novel method. A single nucleotide mismatch to the hairpin probes caused an average of 400-800 mV difference in melting potential against the perfect match, while the error of this assay was lower than 20 mV. Experiments demonstrated that the hairpin stem was critical to the method. The concept of scanning potential hairpin denaturation could also be used extensively in different areas of nucleotide hybridization based assays.     

A Model for Calculating Electrostatic Interactions between Colloidal Particles of Arbitrary Surface Topology

A numerical model for calculating the electrostatic interaction between two particles of arbitrary shape and topology is described. A key feature of the model is a generalized discretization program, capable of simulating any desired analytical shape as a set of flat, triangular elements. The relative sizes of the elements are adjusted using a density function to better match the desired shape and the spatial variation of the electrical surface properties on each particle. The distribution of either surface potential or surface charge density is then calculated using a boundary element approach to solve the linearized Poisson-Boltzmann equation. Example interaction energy profiles are calculated for three different types of roughness-bumps, pits, and surface waves. It is found that the interaction energy between rough particles remains different from that between two equivalent smooth spheres at all separations, even for gap widths much larger than either the solution Debye length or the characteristic roughness size. This behavior at large gap widths arises from the nature of the decay of the electric potential away from each particle. In addition, the magnitude of the roughness effect is found to depend greatly on the size and shape of the nonuniformity as well as the electrostatic boundary conditions. For example, for a sphere containing asperities of height equal to 0.2 times the particle radius, the interaction energy can be as much as 50% greater than that between two equivalent spheres under the condition of constant surface potential. At constant surface charge density, the ratio of the interaction energies between rough and smooth spheres was found to either diverge or become zero as contact between the two particles is approached, depending on the nature of the roughness. Changes of this magnitude could clearly have a substantial impact on the stability behavior of a dispersion of such particles. Copyright 2001 Academic Press.     

Structure and stability of endohedral X@Si20H20 complexes (X = Li, Na, K, Be, Mg, Ca)

The structure and stability of endohedral X@Si₂₀H₂₀ complexes (X = Li^0/+, Na^0/+, K^0/+, Be^0/2+, Mg^0/2+, Ca^0/2+) have been studied at the B3LYP/6-31G* level of density functional theory. It is found that complexes with X = Na^0/+, K^0/+, Mg and Ca^0/2+ are energy minimum structures with X at the cage center in I_h symmetry, while those with X = Li^0/+, Be^0/2+, Mg²⁺ have off-centered structures with X towards one pentagon face in C_5v symmetry. Large electron or charge transfer between the Si₂₀H₂₀ cage and the encapsulated X has been observed.     

Sorption of 241Am by Aspergillus nigerspore and hyphae

Biosorption of ²⁴¹Am by a fungus A. niger, including the spore and hyphae, was investigated. The preliminary results showed that the adsorption of ²⁴¹Am by the microorganism was efficient. More than 96% of the total ²⁴¹Am could be removed from ²⁴¹Am solutions of 5.6-111 MBq/l (C _o) by spore and hyphaeof A. niger, with adsorbed ²⁴¹Am metal (Q) of 7.2-142.4 MBq/g biomass, and 5.2-106.5 MBq/g, respectively. The biosorption equilibrium was achieved within 1 hour and the optimum pH range was pH 1-3. No obvious effects on ²⁴¹Am adsorption by the fungus were observed at 10-45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above the ²⁴¹Am concentration. The ²⁴¹Am biosorption by the fungus obeys the Freundlich adsorption equation. There was no significant difference between the adsorption behavior of A. nigerspore and hyphae. This revised version was published online in July 2006 with corrections to the Cover Date.     

The preparation and fluorescence properties of europium nanoparticles

A new structured metallic nanomaterial of europium nanoparticle was prepared using tannic acid as the reductive agent,and nanoeuropium protein conjugates were synthesized by the method of lipoic acid modification on the surface of nanoparticle,which opens a new field of application of lanthanides in nanotechniques.Their properties were also characterized by UV-vis absorption spectroscopy,transmission electron microscopy (TEM),and fluorescence spectroscopy.The europium nanoparticle and its protein conjugates solution were stable and water-soluble.The fluorescence intensity of the composite europium nanoparticles was significantly increased in the presence of trace protein,and was linear proportional to the concentration of proteins under optimum conditions.According to this,a fluorimetric method for the determination of protein was developed in this paper.