A new dimensionless group model for determining the viscosity of nanofluids

Immobilization of lead contamination in soils by precipitation of non-assimilable for plants Pb-phosphate was considered. Glassy fertilizer of controlled release rate of the nutrients for plants as a source of phosphate anions was applied. Thermal analysis methods (TG/DTG/DTA) were used for the identification of components of Pb-precipitate, which being in statu nascendi have nonstoichiometric composition and disordered crystallographic structure difficult to identify by XRD method. Application of TA methods permits to demonstrate the negative role of Pb complexing citric acid solution simulating the natural soil conditions, which inhibits the Pb-phosphate of pyromorphite type formation.     

Electrocatalytic oxidation of nitrite at a terpyridine manganese(II) complex modified carbon past electrode

A carbon past electrode modified with [Mn(H₂O)(N₃)(NO₃)(pyterpy)], ( \textpyterpy = 4￠- ( 4 - \textpyridyl ) - 2,2￠:\text6￠,\text2￠￠- \textterpyridine ) \left( {{\text{pyterpy}} = 4\prime - \left( {4 - {\text{pyridyl}}} \right) - 2,2\prime:{\text{6}}\prime,{\text{2}}\prime\prime - {\text{terpyridine}}} \right) complex have been applied to the electrocatalytic oxidation of nitrite which reduced the overpotential by about 120 mV with obviously increasing the current response. Relative standard deviations for nitrite determination was less than 2.0%, and nitrite can be determined in the ranges of 5.00 × 10⁻⁶ to 1.55 × 10⁻² mol L⁻¹, with a detection limit of 8 × 10⁻⁷ mol L⁻¹. The treatment of the voltammetric data showed that it is a pure diffusion-controlled reaction, which involves one electron in the rate-determining step. The rate constant k′, transfer coefficient α for the catalytic reaction, and diffusion coefficient of nitrite in the solution, D, were found to be 1.4 × 10⁻², 0.56× 10⁻⁶, and 7.99 × 10⁻⁶ cm² s⁻¹, respectively. The mechanism for the interaction of nitrite with the Mn(II) complex modified carbon past electrode is proposed. This work provides a simple and easy approach to detection of nitrite ion. The modified electrode indicated reproducible behavior, anti-fouling properties, and stability during electrochemical experiments, making it particularly suitable for the analytical purposes.     

Protic ionic liquid [TMG][Ac] as an efficient,homogeneous and recyclable catalyst for Boc protection of amines

An efficient and practical protocol for the chemoselective N-Boc protection of various structurally different aryl, aliphatic and heterocyclic amines was carried out with (Boc)₂O using protic 1, 1, 3, 3-tetra-methylguanidinium acetate (10 mol%) as recyclable catalyst under solvent free condition at ambient temperature. No competitive side reactions (isocyanate, urea and N, N-di-Boc) were observed. α-Amino alcohols afforded the N-Boc-derivative without oxazolidinone formation.     

Pyrophosphate Selective Recognition in Aqueous Solution Based on Fluorescence Enhancement of a New Aluminium Complex

A novel and simple fluorescence enhancement method for selective pyrophosphate(PPi) sensing was proposed based on a 1:1 metal complex formation between bis(8-hydroxy quinoline-5-solphonat) chloride aluminum(III) (Al(QS)₂Cl), (L) and PPi in aqueous solution. The linear response range covers a concentration range of 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L of PPi and the detection limit of 2.3 × 10⁻⁸ mol/L. The association constant of L-PPi complex was calculated 2.6 × 10⁵ L/mol. L was found to show selectively and sensitively fluorescence enhancement toward PPi over than I₃^-, NO₃^-, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO4⁻ and SO₄²⁻, which was attributed to higher stability of inorganic complex between pyrophosphate and L.     

Analysis of coir fiber acoustical characteristics

Coir fiber from coconut husk is an important agricultural waste in Malaysia. Acoustic absorption coefficient of the fiber as a porous material is studied in this paper. Two types of fiber are investigated, fresh from wet market and industrial prepared mixed with binder. Moreover two analytical models, namely; Delany–Bazley and Biot–Allard are used for analysis. Experimental measurements in impedance tube are conducted to validate the analytical outcomes. Results show that fresh coir fiber has an average absorption coefficient of 0.8 at f > 1360 Hz and 20 mm thickness. Increasing the thickness is improved the sound absorption in lower frequencies, having the same average at f > 578 Hz and 45 mm thickness. Delany–Bazley technique can be used for both types of fiber while Biot–Allard method is compensated for the industrial prepared fiber considering the binder additive. This form generally shows poor acoustical absorption in low frequencies. Inevitably, fiber has to be mixed with additives in commercial use to enhance its characteristics such as stiffness, unti-fungus and flammability. Hence other approaches such as adding air gap or perforated plate should be used to improve the acoustical properties of industrial treated coir fiber.     

Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

Improved equation of state for ionic liquids using surface tension

The major objective of this work was the development of a reliable model to describe volumetric properties of ionic liquids (ILs). In this regard, we have applied the Ihm–Song–Mason equation of state (EOS) to some phosphonium- and imidazolium-based ILs. Three temperature-dependent parameters in the equation of state have been scaled based on the surface tension and the liquid density at room temperature. In order to improve the predictive power of the mentioned EOS for ILs, we have proposed using a simple modification. We have taken 1,228 experimental points to show the reliability of the improved EOS. The comparison of predicted densities with literature data over a broad range of temperature, 293–472 K, and pressures up to 200 MPa led to encouraging results. The average absolute deviation of calculated densities from literature values was found to be 0.75%.     

Analysis of ultrafast nonlinear phenomena��s influences on output optical pulses and four-wave mixing characteristics in semiconductor optical amplifiers

We have analysed the output pulse characteristics of semiconductor optical amplifier (SOA). It is shown that they can be modified due to the variation of input parameters, such as, gain, input pulsewidth, input pulse energy and effects imposed by the medium. Therefore, the influence of these parameters are analysed on the output pulse shape, spectrum, chirp and pulsewidth. We have used the nonlinear propagation equation taking into account the gain spectrum dynamics, gain saturation which depends on carrier depletion, carrier heating, spectral hole-burning, group velocity dispersion, self-phase modulation and two photon absorption. We have used the finite-difference beam propagation method to simulate the wave evolution both in time and spectral domain in the SOA. We have also simulated the four-wave mixing characteristics between pulses for various input pulses. An accurate output pulse shape can be achieved by controlling the mentioned parameters. To the authors knowledge, pulse shaping in co-propagation regime due to medium effect and input pulse shapes in presence of all nonlinear effects relevant to picosecond regime have been studied comprehensively, for the first time in this work.     

Damage detection and denoising in two-dimensional structures using curvelet transform by wrapping method

The main objectives of this study are to present a vibration-based damage identification method and also a denoising mode shape approach applicable to two-dimensional structures using curvelet transform. For this purpose, the curvelet transform via wrapping method is employed. The reliability of the proposed technique is demonstrated through a verification study by comparing the results of numerical and those of the experimental data in plate structures. Two case studies, one-story and three-story shear walls assuming damages at arbitrary locations, are examined in which different noise levels are included. Good agreement between the simulated and assumed damage in both example is demonstrated. The results confirm the robustness and high performance of the proposed method in detecting the damage in plate structure and eliminating the noises.     

Performance assessment of new perturbed hard-sphere equation of state for molten metals and ionic liquids: Application to pure and binary mixtures

This work addresses modeling the pressure–volume–temperature (PVT) properties of molten metals and ionic liquids (ILs) using a new perturbed hard-sphere equation of state (PHS EOS). Two temperature-dependent parameters appeared in the EOS, are correlated with two scaling constants σ and ε. Knowing these parameters, the proposed EOS is applied to these classes of liquids. The reliability of the proposed model is checked by comparing with 3177 experimental density data points. The average absolute deviations (AAD) of predicted densities of molten metals and ILs from literature data are found to be 1.35% and 0.56%, respectively. The extension of PHS EOS to binary metal alloys and IL + IL is also discussed. Generally, 609 data points for binary mixtures have been examined. The AAD of the predicted results are found to be 1.03%.