A new approach for diagnostics of dense magnetoactive plasmas using the effect of parametrically induced transparency

We study theoretically the effect of parametrically induced transparency. The main idea of this effect is transport of the upper-hybrid radiation of overdense toroidal plasmas in vacuum through the opaque region by parametric shift of the radiation frequency. We propose that the microwave radiation employed for electron-cyclotron heating at the second cyclotron harmonic in tokamaks is used as the drive wave. Calculations performed for the TEXTOR tokamak demonstrate that this effect is promising for diagnostics of dense plasmas in toroidal devices if a gyrotron with an ouput power of several hundred kilowatts is used. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 50, No. 6, pp. 508–521, June 2007.     

Solid-phase extraction of bismuth, lead and nickel from seawater using silica gel modified with 3-aminopropyltriethoxysilane filled in a syringe prior to their determination by graphite furnace atomic absorption spectrometry

In this study, the use of syringe filled with sorbent for the separation and enrichment of bismuth, lead and nickel prior to their analysis by graphite furnace atomic absorption spectrometry was described to substitute for batch and column techniques. The method proposed in this paper was compared with column technique with respect to easiness, fastness, simplicity, recovery and risk of contamination. The syringe was filled with 0.5 g of sorbent and in order to retain the analyte elements, 5 ml of sample solution (pH≥5) was drawn into the syringe to 15 s and discharged again in 15 s. Then, 2.0 M of HCl, as the eluent, was drawn into the syringe and ejected back to desorb the analyte elements. At optimum conditions, the recoveries of Bi, Pb and Ni were 95-99% with relative standard deviations (RSDs) of around ±2%. Detection limit (δ) was 0.5 μg l⁻¹ for Bi, Pb and Ni, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only one time. Bi, Pb and Ni added to a seawater sample were quantitatively recovered (>95%) with low RSD values of around ±2-3%. The risk of contamination is less than that with the column technique. In addition, it is much faster, simpler, easier, more practical and handy compared with column technique.     

Determination of bismuth and cadmium after solid-phase extraction with chromosorb-107 in a syringe

The determination of bismuth and cadmium by graphite furnace atomic absorption spectrometry (GFAAS) after solid-phase extraction (SPE) on Chromosorb-107 filled in a syringe was described. To retain the analytes, the sample solution treated with and without ammonium pyrolidine dithiocarbamate (APDC) was drawn into the syringe filled with Chromosorb-107 and discharged back manually. Bismuth and cadmium were quantitatively sorbed at pH ≥ 6 irrespective of whether the analyte was complexed with APDC prior to passing through the Chromosorb-107. Analyte elements sorbed on the resin were quantitatively eluted with 3.0 M of HNO₃ again drawing and discharging the eluent into the syringe and ejected it back. Optimum flow rates of sample or eluent for sorption and elution processes were 20 ml min⁻¹ for drawing and 20 ml min⁻¹ for discharging in all cases. Bismuth and cadmium were analyzed by graphite furnace atomic absorption spectrometry. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only one time. The validity of the proposed method was checked with standard reference materials (NIST SRM 1515 Apple-Leaves, CWW-TM-E Waste Water and CRM-SW Sea Water). The analyte elements were quantitatively (>95%) recovered from different matrices irrespective of treated samples with APDC. Detection limits (δ) were 0.8 and 1.2 μg l⁻¹ for Bi and Cd, respectively. The method can be characterized with fastness, simplicity, quantitative recovery and high reproducibility.     

Photo and Thermo‐luminescence Properties of Mn4+, Ce4+ and Sm3+ in MgAl2Si2O8 Phosphor

Mn⁴⁺, Ce⁴⁺ and Sm³⁺ doped MgAl₂Si₂O₈‐based phosphors were synthesized at 1300 °C by solid state reaction and characterized by thermogravimetry (TG), differential thermal analysis (DTA), X‐ray powder diffraction (XRD), photoluminescence (PL), thermoluminescence (TL) and scanning electron microscopy (SEM). The phosphors showed broad red emission bands in the range of 610–715 nm and different maximum intensity when activated by UV illumination. Such a red emission can be attributed to the intrinsic ²E→⁴A₂ transitions of Mn⁴⁺.     

NMR relaxometry study of gelatin based low-calorie soft candies

ABSTRACT

Soft candies are popular confectionery products. The most significant concern on the consumption of these products is the high amount of sugar and thus the high calories. The use of low-calorie sweeteners is a desirable trend in confectionery research. In this study, gelatin-based soft candies were formulated by using different sweeteners and their characterisation was performed using high and low field nuclear magnetic resonance (NMR) relaxation experiments. To complement the information obtained by NMR experiments, moisture content, water activity, texture analysis and differential scanning calorimeter experiments were also conducted. T₁ and T₂ relaxation times were measured at both low and high fields and also temperature-dependent measurements were conducted at the high field system. Candies were formulated by substitution of sucrose with maltitol, isomalt and stevia at 30%, 50% and 70% ratios. Significant difference was observed on relaxation times. T₁ values were best described by a mono-exponential model, whereas for T₂ relaxation times a bi-exponential model gave better results at both fields.     

Calculation of gamma-ray mass attenuation coefficients of some Egyptian soil samples using Monte Carlo methods

Monte Carlo simulations, FLUKA and Geant4, were performed to study mass attenuation for various types of soil at 59.5, 356.5, 661.6, 1173.2 and 1332.5 keV photon energies. Appreciable variations are noted for all parameters by changing the photon energy and the chemical composition of the sample. The simulations parameters were compared with experimental data and the XCOM program. The simulations show that the calculated mass attenuation coefficient values were closer to experimental values better than those obtained theoretically using the XCOM database for the same soil samples. The results indicate that Geant4 and FLUKA can be applied to estimate mass attenuation for various biological materials at different energies. The Monte Carlo method may be employed to make additional calculations on the photon attenuation characteristics of different soil samples collected from other places.     

Screening of Quantum States of an Optical Field from a Resonant Perturbing Subsystem

Radiophysics and Quantum Electronics - We predict theoretically the effect of screening the quantum states (including entangled ones) of an optical field from interaction with a resonant perturbing...     

Determination of amitraz and its transformation products in pears by ethyl acetate extraction and liquid chromatography–tandem mass spectrometry

A method has been developed for identification and quantification of the acaricide amitraz and its transformation products, 2,4-dimethylaniline (DMA), 2,4-dimethylformamidine (DMF) and N-2,4-dimethylphenyl-N-methylformamidine (DMPF) in pears. The analytes were extracted using ethyl acetate and anhydrous sodium sulphate. Analysis was performed by liquid chromatography–electrospray tandem mass spectrometry (LC–ESI-MS/MS) in the positive ion mode using a triple quadrupole (QqQ) instrument. Two precursor-product ion transitions were monitored for each compound in the selected reaction monitoring (SRM) mode. The method was validated with pears taken from the orchard before the amitraz treatment and spiked at the limit of quantification (LOQ), 10 times the LOQ and the maximum residue limit (MRL). Recoveries were between 70 and 106% and relative standard deviations were below 19% (n = 5 at each spiked level). Excellent sensitivity resulted in limits of detection (LODs) for all the compounds below 10 μg kg⁻¹. Quantification was carried out using matrix-matched standards calibration, response was a linear function of the concentration from the LOQs to, at least, three orders of magnitude. Recoveries and standard deviations were comparable to those obtained after hydrolysis of amitraz and its metabolites to DMA. Occurrence of amitraz and its metabolites in field-treated pears showed that, seven days after the treatment, DMPF and DMF are the main degradation products. This work reports for the first time the use of a conventional pesticide multiresidue method and LC–ESI-MS/MS for determining amitraz and its metabolites in pears.     

Membrane Filtration of Iron(III), Copper(II) and Lead(II) Ions as 1‐(2‐Pyridylazo) 2‐Naphtol (PAN) for Their Preconcentration and Atomic Absorption Determinations

A membrane filtration procedure for the preconcentration and atomic absorption spectrometric determination of Pb(II), Co(II) and Fe(III) ions in natural water samples has been established. Cellulose nitrate membrane filters (0.45 μm and 47 mm diameter) were used in all experiments. The procedure is based on chelate formation of the analyte metals with 1‐(2‐pyridylazo) 2‐naphtol (PAN) and on retention of the chelates on cellulose nitrate membrane filter. The cellulose nitrate membrane and analyte ions were completely dissolved by 500 μL of nitric acid at 85 °C on a hood and then metal determinations were performed by flame atomic absorption spectrometry. The method was applied to natural water samples for the determination of analyte ions with satisfactory results, e.g., recoveries > 95%, RSD's < 10%.     

Influence of magnetic fields on electron-Ion recombination at very low energies

Radiative recombination (inverse photoionization) is believed to be well understood since the beginning of quantum mechanics. Still, modern experiments consistently reveal excess recombination rates at very low electron-ion center-of-mass energies. In a detailed study on recombination of F6+ and C6+ ions with magnetically guided electrons we explored the yet unexplained rate enhancement, its dependence on the magnetic field B, the electron density n(e), and the beam temperatures T( perpendicular) and T( ||). The excess scales as T(-1/2)( perpendicular) and, surprisingly, as T(-1/2)( ||), increases strongly with B, and is insensitive to n(e). This puts strong constraints on explanations of the enhancement.