Managing transshipments in a multi-retailer system with approximate policies

Using the right transshipment policy is important when transshipments are exercised under demand uncertainty. Optimal transshipment policy can be quite complex in a multi-firm system as optimal actions depend on all system variables. Moreover, both how to select requested retailer and how to respond to requests are in question. We introduce simple, close-to-optimal heuristic transshipment policies for multiple retailers. We first show that heuristic policies may perform even better than self-optimal policy, which is explained by Braess’s paradox. Then we test the performances of various heuristics with respect to centrally optimal policy. When retailers can observe others’ inventory levels, more effective transshipments can be made. Otherwise, a random selection performs quite well. We also observe that although always-accept respond policy is quite close to centrally optimal in small systems, the performance of pairwise-optimal holdback levels to respond requests is more clear and consistent for larger systems.     

Fiber amplification of pulse bursts up to 20 μJ pulse energy at 1 kHz repetition rate

We demonstrate burst-mode operation of a polarization-maintaining Yb-doped fiber amplifier. Groups of pulses with a temporal spacing of 10?ns and 1?kHz overall repetition rate are amplified to an average pulse energy of ～20?μJ and total burst energy of 0.25?mJ. The pulses are externally compressed to ～400?fs. The amplifier is synchronously pulsed-pumped to minimize amplified spontaneous emission between the bursts. We characterize the influence of pump pulse duration, pump-to-signal delay, and signal burst length.     

Solid-phase extraction of bismuth, lead and nickel from seawater using silica gel modified with 3-aminopropyltriethoxysilane filled in a syringe prior to their determination by graphite furnace atomic absorption spectrometry

In this study, the use of syringe filled with sorbent for the separation and enrichment of bismuth, lead and nickel prior to their analysis by graphite furnace atomic absorption spectrometry was described to substitute for batch and column techniques. The method proposed in this paper was compared with column technique with respect to easiness, fastness, simplicity, recovery and risk of contamination. The syringe was filled with 0.5 g of sorbent and in order to retain the analyte elements, 5 ml of sample solution (pH≥5) was drawn into the syringe to 15 s and discharged again in 15 s. Then, 2.0 M of HCl, as the eluent, was drawn into the syringe and ejected back to desorb the analyte elements. At optimum conditions, the recoveries of Bi, Pb and Ni were 95-99% with relative standard deviations (RSDs) of around ±2%. Detection limit (δ) was 0.5 μg l⁻¹ for Bi, Pb and Ni, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only one time. Bi, Pb and Ni added to a seawater sample were quantitatively recovered (>95%) with low RSD values of around ±2-3%. The risk of contamination is less than that with the column technique. In addition, it is much faster, simpler, easier, more practical and handy compared with column technique.     

Synthesis, characterization and liquid–liquid extraction properties of new methoxyaminobiphenylglyoxime derivatives and their complexes with some transition metals

In this study, three new aminobiphenylglyoximes, [L¹H₂] N-(2-methoxy)aminobiphenylglyoxime, [L²H₂] N-(3-methoxy)aminobiphenylglyoxime and L[³H₂] N-(4-methoxy)aminobiphenylglyoxime have been synthesized by the reaction of (E,E)-4′-biphenylchloroglyoxime with 2-Methoxyaniline, 3-Methoxyaniline and 4-Methoxyaniline in absolute ethanol. The preparation Ni^II, Co^II and Cu^II complexes of these ligands are described. The ligands and their complexes were characterized by elemental analyses, IR, mass, H¹ and ¹³C NMR spectra, thermogravimetric analyses (t.g.a) and magnetic susceptibility measurements. Ligands complexing properties were studied by the liquid–liquid extraction of selected alkali (Li⁺, Na⁺, K⁺, Cs⁺) and transition metals (Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺). It has been observed that all ligands show a high affinity to Cu²⁺ ions, whereas almost no affinity to alkali metals. The extraction equilibrium constants (K _ex) for complexes of ligands with Cu²⁺ metal picrates between dichloromethane and water have been determined at 25°C.     

Determination of bismuth and cadmium after solid-phase extraction with chromosorb-107 in a syringe

The determination of bismuth and cadmium by graphite furnace atomic absorption spectrometry (GFAAS) after solid-phase extraction (SPE) on Chromosorb-107 filled in a syringe was described. To retain the analytes, the sample solution treated with and without ammonium pyrolidine dithiocarbamate (APDC) was drawn into the syringe filled with Chromosorb-107 and discharged back manually. Bismuth and cadmium were quantitatively sorbed at pH ≥ 6 irrespective of whether the analyte was complexed with APDC prior to passing through the Chromosorb-107. Analyte elements sorbed on the resin were quantitatively eluted with 3.0 M of HNO₃ again drawing and discharging the eluent into the syringe and ejected it back. Optimum flow rates of sample or eluent for sorption and elution processes were 20 ml min⁻¹ for drawing and 20 ml min⁻¹ for discharging in all cases. Bismuth and cadmium were analyzed by graphite furnace atomic absorption spectrometry. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only one time. The validity of the proposed method was checked with standard reference materials (NIST SRM 1515 Apple-Leaves, CWW-TM-E Waste Water and CRM-SW Sea Water). The analyte elements were quantitatively (>95%) recovered from different matrices irrespective of treated samples with APDC. Detection limits (δ) were 0.8 and 1.2 μg l⁻¹ for Bi and Cd, respectively. The method can be characterized with fastness, simplicity, quantitative recovery and high reproducibility.     

Photo and Thermo‐luminescence Properties of Mn4+, Ce4+ and Sm3+ in MgAl2Si2O8 Phosphor

Mn⁴⁺, Ce⁴⁺ and Sm³⁺ doped MgAl₂Si₂O₈‐based phosphors were synthesized at 1300 °C by solid state reaction and characterized by thermogravimetry (TG), differential thermal analysis (DTA), X‐ray powder diffraction (XRD), photoluminescence (PL), thermoluminescence (TL) and scanning electron microscopy (SEM). The phosphors showed broad red emission bands in the range of 610–715 nm and different maximum intensity when activated by UV illumination. Such a red emission can be attributed to the intrinsic ²E→⁴A₂ transitions of Mn⁴⁺.     

Rapid and sensitive ultra-high-pressure liquid chromatography-quadrupole time-of-flight mass spectrometry for the quantification of amitraz and identification of its degradation products in fruits

Liquid chromatography under high pressure in combination with quadrupole time-of-flight mass spectrometry (QqTOF-MS and MS/MS) has been used to detect amitraz degradation products in pears, to characterize their structures, and to evaluate their occurrences in samples of different origins. Using the proposed approach, the parent pesticide and four degradation products were identified. To this end, pear samples were extracted with ethyl acetate and anhydrous sodium sulphate. Amitraz was found to be rapidly decomposed into four related compounds, of which N-(2,4-dimethylphenyl)formamidine (DMPF) was the most abundant and persistent. N,N'-bisdimethylphenylformamidine (BDMPF), 2,4-dimethylformamidine (DMF) and 2,4-dimethyl aniline (DMA) were also main metabolites of amitraz. To our knowledge this is the first report that confirms the presence of BDMPF in pears. The method was validated using MS and MS/MS for those standard available (analytical or not). In MS, recoveries ranged from 83 to 101% with relative standard deviation (RSD) from 9 to 19% at the limit of quantification (LOQ) (between 5 and 20 microg kg(-1)). Using MS/MS, recoveries, linearity and precision were similar but LOQs were higher because the intense fragmentation of the protonated molecules in the product mass spectrum. BDMPF, as an approximation, was quantified based on the DMF metabolite. The results demonstrated that high-pressure LC-QqTOF-MS and MS/MS techniques enhance further the capabilities of LC-MS in the identification of polar species in complex food samples.     

NMR relaxometry study of gelatin based low-calorie soft candies

ABSTRACT

Soft candies are popular confectionery products. The most significant concern on the consumption of these products is the high amount of sugar and thus the high calories. The use of low-calorie sweeteners is a desirable trend in confectionery research. In this study, gelatin-based soft candies were formulated by using different sweeteners and their characterisation was performed using high and low field nuclear magnetic resonance (NMR) relaxation experiments. To complement the information obtained by NMR experiments, moisture content, water activity, texture analysis and differential scanning calorimeter experiments were also conducted. T₁ and T₂ relaxation times were measured at both low and high fields and also temperature-dependent measurements were conducted at the high field system. Candies were formulated by substitution of sucrose with maltitol, isomalt and stevia at 30%, 50% and 70% ratios. Significant difference was observed on relaxation times. T₁ values were best described by a mono-exponential model, whereas for T₂ relaxation times a bi-exponential model gave better results at both fields.     

Novel red-emitting phosphors, (Mg(1−x−y)MnxDyy)Al2Si2O8 and (Mg(1−x−y)MnxTmy)Al2Si2O8

Mn⁴⁺ doped and Dy³⁺, Tm³⁺ co-doped MgAl₂Si₂O₈-based phosphors were prepared by conventional solid state reaction at 1,300 °C. They were characterized by thermogravimetry, differential thermal analysis, X-ray powder diffraction, photoluminescence, and scanning electron microscopy. The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 600–715 nm and had a different maximum intensity when activated by UV illumination, was discussed. Such a red emission can be attributed to the ²E → ⁴A₂ transitions of Mn⁴⁺.     

Calculation of gamma-ray mass attenuation coefficients of some Egyptian soil samples using Monte Carlo methods

Monte Carlo simulations, FLUKA and Geant4, were performed to study mass attenuation for various types of soil at 59.5, 356.5, 661.6, 1173.2 and 1332.5 keV photon energies. Appreciable variations are noted for all parameters by changing the photon energy and the chemical composition of the sample. The simulations parameters were compared with experimental data and the XCOM program. The simulations show that the calculated mass attenuation coefficient values were closer to experimental values better than those obtained theoretically using the XCOM database for the same soil samples. The results indicate that Geant4 and FLUKA can be applied to estimate mass attenuation for various biological materials at different energies. The Monte Carlo method may be employed to make additional calculations on the photon attenuation characteristics of different soil samples collected from other places.