IR-spektroskopische Untersuchungen wäßriger Lösungen mit Hilfe der ATR-Technik

The ATR-method is qualified for measuring aqueous solutions if the multiplereflection technique is used in such a way that strong water absorptions do not cover a large part of the information on the spectrum. The single-reflection technique is mainly suitable for solutions of 2-molar and higher concentrations. Organic acids, phenols, amides, saccharides and anorganic compounds had been measured. A practical example proved that there is the possibility of also taking quantitative measurements with the ATR-method.     

Relaxation in partiell kristallisierten Copolymeren des äthylens

Zusammenfassung Die dielektrischen Verluste diphenylmethylierter und chlorierter Poly?thylene k?nnen in Einzelheiten quantitativ richtig dargestellt werden, wenn man annimmt, da\ das Copolymerensystem pseudo-eutektischen Charakter hat. Die dipoltragenden Gruppen (CHCl bzw. Diphenylmethan-CH) werden offenbar nicht in die Kristalle, wohl aber in die longitudinalen Grenzschichten eingebaut. Dasα-Maximum ist den Dipolen in der Grenzschicht, dasΒ-Maximum den Dipolen im Innern der amorphen Anteile zuzuordnen. Die Temperaturlage und die Fl?che unter diesen Verlustmaxima h?ngen in bestimmter Weise von der mittleren Kristalldicke ab. Eine klare Zuordnung von Strukturdaten und Daten aus dem Relaxationsspektrum ist durch eine erweiterte quantitative Analyse der dielektrischen Me\ergebnisse m?glich. Es sind dann nicht nur die Temperaturlage desα- und desΒ-Maximums, sondern auch deren relative Fl?chen?nderungen in übereinstimmung mit dem Experiment berechenbar. Dies ist eine scharfe quantitative Konsistenzprüfung des erweiterten Stuktur-modells, wonach die Kristalle longitudinale Grenzschichten von definierter mittlerer Dicke besitzen sollen. Mit Hilfe der Zwei-Drittel-Regel kann man bei Kenntnis der wahren Konzentration der Comonomereneinheiten in den amorphen Zwischenbereichen kristallisierter Proben die Temperaturlage der glasigen Erstarrung abh?ngig von der Gesamtkonzentration sehr gut angeben. Die Lage der Glastemperatur sollte hiernach im Vergleich zur Glastemperatur des ‚'unendlich gro\en“ amorphen Systems derselben Konzentration durch die Kristallisation nicht ver?ndert werden. Wir danken der Deutschen Forschungsge-meinschaft für die gro\zügige Bereitstellung von Sach- und Personalmitteln.     

Derivatives of carbohydrazide,thiocarbohydrazide and diaminoguanidine as photometric analytical reagents. III

Summary An absorption method for the collection of acid and condensable volcanic gases is described. A Cd(OH)₂ suspension allows the simultaneous sampling of sulfide and sulfur dioxide. A complete scheme for chemical analysis of H₂O, CO₂, H₂S, SO₂, HCl and HF is presented.The method is relatively simple and accurate and requires only simple equipment. Moreover, separate samples of the condensable part of the volcanic gas may be used for analysis of trace elements.

---

Probenahme und Analyse vulkanischer Gase

Zusammenfassung Eine Absorptionsmethode zur Probenahme saurer und kondensierbarer Vulkangase wurde beschrieben. Eine Cd(OH)₂-Suspension ermöglicht die gleichzeitige Probenahme von H₂S und SO₂. Ein Analysenschema für die chemische Analyse von H₂O, CO₂, H₂S, SO₂, HCl und HF wurde angegeben. Das Verfahren ist relativ einfach und genau; es erfordert nur eine einfache Ausrüstung. Proben des kondensierbaren Anteils der Gase dienen zur Bestimmung der Spurenanteile.

     

A fully automated mass spectrometer for the analysis of organic solids

Automation of a mass spectrometer—computer system makes it possible to process up to 30 samples without attention after sample loading. An automatic sample changer introduces the samples successively into the ion source by means of a direct inlet probe. A process control unit determines the operation sequence. Computer programs are available for the hardware support, system supervision and evaluation of the spectrometer signals. The most essential precondition for automation — automatic evaporation of the sample material by electronic control of the total ion current — is confirmed to be satisfactory. The system operates routinely overnight in an industrial laboratory, so that day work can be devoted to difficult analytical problems. The cost of routine analyses is halved.     

Solution dynamics and stability of lanthanide(III) (S)-2-(p-nitrobenzyl)DOTA complexes

Addition of a benzyl substituent to the macrocyclic ring of DOTA has a substantial impact on the conformational ring flipping motion of the macrocycle in the resulting LnDOTA complexes. The p-NO2-benzyl substituent in the Ln(p-NO2-Bn-DOTA)- complexes lies in an equatorial position and effectively "locks" the conformation of the ring into the deltadeltadeltadelta configuration. The presence of the p-NO2-benzyl group also increases the population of the square antiprismatic (SAP) coordination isomer for all Ln(p-NO2-Bn-DOTA)- complexes relative to that seen for the respective LnDOTA- complexes. Despite this increase in SAP isomer population, the rate of water exchange in these complexes remains comparatively fast. The kinetic and thermodynamic stabilities of the Ln(p-NO2-Bn-DOTA)- complexes are also slightly lower than the corresponding LnDOTA- complexes but appear to be sufficiently high for in vivo use.     

On-line coupling of supercritical fluid extraction with high-performance liquid chromatography for the determination of explosives in vapour phases

An investigation into the selectivity of an iminodiacetic acid (IDA) modified silica gel column for transition and heavy metal ions using non-chelating inorganic eluents has been carried out. A number of eluent parameters were investigated to determine the exact retention mechanism taking place and to control selectivity. The parameters studied were eluent ionic strength and the nature of the inorganic salt used, eluent pH and eluent temperature. The results obtained showed how despite certain metal ions exhibiting similar stability constants with the bonded IDA groups, careful control of each of the above parameters, in particular eluent chloride ion concentration and eluent temperature, could result in large changes in selectivity. Optimal conditions for the isocratic and gradient separation of Mg(II), Ca(II), Mn(II), Cd(II), Co(II), Zn(II) and Pb(II) were determined. An isocratic method using a 0.035 M KCl, 0.065 M KNO3 (pH 2.5) eluent was successfully applied to the determination of Mn(II), Cd(II), Co(II) and Zn(II) at concentrations between 20 and 121 microg/l in a freshwater certified reference material (NIST 1640).     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

Stability of Copper(II), Nickel(II) and Zinc(II) Binary and Ternary Complexes of Histidine,Histamine and Glycine in Aqueous Solution

The binary and mixed-ligand complexes formed between ligands (histidine (His), histamine (Him) and glycine (Gly)) and some transition metals (Cu(II), Ni(II) and Zn(II)) were studied potentiometrically in aqueous solution at (25.0 ± 0.1) C and I = 0.10 M KCl in order to determine the protonation constants of the free ligands and stability constants of binary and ternary complexes. The complexation model for each system has been established by the software program BEST from the potentiometric data. The most probable binding mode for each binary species of histidine and for all mixed species was also discussed based upon derived equilibrium constants and stability constants related to the binary species. The ambidentate nature of the histidine ligand, i.e. the ability to coordinate histamine-like, imidazolepropionic acid-like and glycine-like modes was indicated from the results obtained. The stability of ternary complexes was quantitatively compared with their corresponding binary complexes in terms of the parameters, log K, log X and ₁₁₁₀. The concentration distributions of various species formed in solution were also evaluated. In terms of the nature of metal ion, the complex stability follows the trend Cu(II) > Ni(II) > Zn(II), which is in agreement with the Irving-Williams order of metal ions. Thus, the results obtained were compared and evaluated with those in the literature.     

Fitting complex potential energy surfaces to simple model potentials: application of the simplex-annealing method

A stochastic method of optimization, which combines simulated annealing with simplex, is implemented to fit the parameters of a simple model potential. The main characteristic of the method is that it explores the whole space of the parameters of the model potential, and therefore it is very efficient in locating the global minimum of the cost function, in addition to being independent of the initial guess of the parameters. The method is employed to fit the complex intermolecular potential energy surface of the dimer of water, using as a reference the spectroscopic quality anisotropic site-site potential of Feller et al. The simple model potential chosen for its reparameterization is the MCY model potential of Clementi et al. The quality of the fit is assessed by comparing the geometry of the minimum, the harmonic frequencies, and the second virial coefficients of the parameterized potential with the reference one. Finally, to prove more rigorously the robustness of this method, it is compared with standard nonstochastic methods of optimization.     

Synthesis and structure of cyclopropano-annelated homosesquinorbornene derivatives containing pyramidalized double bonds: evidence for the sterical effect of a cyclopropyl group on the degree of C=C double-bond pyramidalization

[reaction: see text] endo- and exo-2,3,4,7-tetrahydro-1H-1,4-methanobenzocycloheptene-7-carboxylic acid ethyl esters have been synthesized, and their Diels-Alder cycloaddition reactions with maleic anhydride, dimethyl acetylenedicarboxylate and singlet oxygen have been investigated. The X-ray analysis of four adducts indicated the pyramidalization of the central double bond. Density functional theory calculations on the isolated products and model compounds showed excellent agreement between the experimental and theoretical determined butterfly angles. Furthermore, it has been shown that a cyclopropyl group fused to [2.2.2] system decreases significantly the degree of the pyramidalization which is attributed to the steric interactions between the cyclopropyl group and ethano bridge of the norbornene systems. Due to the instability of the bicyclic endoperoxides, their X-ray analysis could not be carried out. DFT calculations on model compounds showed increased bending in the case of the product obtained by the addition of singlet oxygen to endo-2,3,4,7-tetrahydro-1H-1,4-methanobenzocycloheptene-7-carboxylic acid ethyl ester.