The Transport Properties of the Cell Membrane Ion Channels in Electric Fields: Bethe Lattice Treatment

The interactive two-state model of cell membrane ion channels in an electric field is formulated on the Bethe lattice by means of the exact recursion relations. The probability of channel opening or maximum fractions of open potassium and sodium channels are obtained by solving a non-linear algebraic equation. Using known parameters for the conventional mean-field theory the model gives a good agreement with the experiment both at low and high trans-membrane potential values. For intermediate voltages, the numerical results imply that collective effects are introduced by trans-membrane voltage.     

Mineralogical analysis of auriferous ores from the El Diamante mine, Colombia

X-ray diffraction (XRD), Mössbauer spectrometry (MS), secondary ions mass spectroscopy (SIMS) and laser-ablation microprobe–inductively coupled plasma–mass spectrometry (LAM–ICP–MS) were used to study mineral samples of Colombian auriferous ores collected from the “El Diamante” mine, located in the municipality of Guachavez-Nariño, in Colombia. The samples were prepared as polished thin sections and polished sections. From XRD data, quartz, sphalerite and pyrite were detected and their respective cell parameters were estimated. From MS analyses, pyrite, arsenopyrite and chalcopyrite were identified; their respective hyperfine parameters and respective texture were deduced. Multiple regions of approximately 200 × 200 μm in each sample were analyzed with SIMS; the occurrence of “invisible gold” associated mainly with pyrite and secondarily with arsenopyrite could thus be assigned. It was also found that pyrite is of the arsenious type. Spots from 30 to 40 μm in diameter were analyzed with LAM–ICP–MS for pyrite, arsenopyrite and sphalerite; Au is “homogeneously” distributed inside the structure of the arsenious pyrite and the arsenopyrite (not as inclusions); the chemical composition indicates similarities of this “invisible gold”, forming a solid solution with arsenious pyrite and arsenopyrite. One hundred nineteen and 62 ppm of ‘invisible gold’ was quantified in 21 spots analyzed on pyrite and in 14 spots on arsenopyrite, respectively.     

Application of N,N‐bis(diphenylphosphino)aniline palladium(II) complexes as pre‐catalysts in Heck coupling reactions

Palladium(II) complexes with N,N‐bis(diphenylphosphino)aniline ligands catalyse the Heck reaction between styrene and aryl bromides, affording stilbenes in good yield. The structures of two of the complexes used as pre‐catalysts have been determined by single‐crystal X‐ray diffraction. Copyright © 2007 John Wiley & Sons, Ltd.     

Solid-State Thin-Film Sensors Based on Chalcogenide Materials Obtained by Planar Technology and Pulsed Laser Deposition

Methods of silicon planar technology and pulsed laser deposition were applied to fabricate fully solid-state chemical sensors for determining ions of copper, lead, cadmium, thallium, and also sulfide and chloride ions on the basis of thin chalcogenide films as ion-sensitive membranes.     

Nuclear Resonant Scattering into the New Millennium

Hyperfine Interactions - The technique of nuclear resonant scattering has spread out in various fields during the previous years. Those fields, which have rapidly developed and attracted the...     

Complex magnetism in ultra-thin films: atomic-scale spin structures and resolution by the spin-polarized scanning tunneling microscope

In this paper we present a density functional theory investigation of complex magnetic structures in ultra-thin films. The focus is on magnetically frustrated antiferromagnetic Cr and Mn monolayers deposited on a triangular lattice provided by a Ag (111) substrate. This involves non-collinear magnetic structures, which we treat by first-principles calculations on the basis of the vector spin-density formulation of the density functional theory. We find for Cr/Ag (111) a coplanar non-collinear periodic 120° Néel structure, for Mn/Ag (111) a row-wise antiferromagnetic structure, and for Fe/Ag (111) a ferromagnetic structure as magnetic ground states. The spin-polarized scanning tunneling microscope (SP–STM) operated in the constant-current mode is proposed as a powerful tool to investigate complex atomic-scale magnetic structures of otherwise chemically equivalent atoms. We discuss a recent application of this operation mode of the SP–STM on Mn/W (110), which led to the first observation of a two-dimensional antiferromagnet on a non-magnetic metal. The future potential of this approach is demonstrated by calculating SP–STM images for different magnetic structures of Cr/Ag (111). The results show that the predicted non-collinear magnetic ground state structure can clearly be discriminated from competing magnetic structures. A general discussion of the application of different operation modes of the SP–STM is presented on the basis of the model of Tersoff and Hamann. Received: 07 May 2001 / Accepted: 23 July 2001 / Published online: 3 April 2002     

Potential for micromachined actuation of ultra-wide continuously tunable optoelectronic devices

Tailored scaling represents a principle of success that, both in nature and in technology, allows the effectiveness of physical effects to be enhanced. Mutation and selection in nature are imitated in technology, e.g. by model calculation and design. Proper scaling of dimensions in natural photonic crystals and our fabricated artificial 1D photonic crystals (DBRs, distributed Bragg reflectors) enable efficient diffractive interaction in a specific spectral range. For our optical microsystems we illustrate that tailored miniaturization may also increase the mechanical stability and the effectiveness of spectral tuning by thermal and electrostatic actuation, since the relative significance of the fundamental physical forces involved considerably changes with scaling. These basic physical principles are rigorously applied in micromachined 1.55-μm vertical-resonator-based devices. We modeled, implemented and characterized 1.55-μm micromachined optical filters and vertical-cavity surface-emitting laser devices capable of wide, monotonic and kink-free tuning by a single control parameter. Tuning is achieved by mechanical actuation of one or several air-gaps that are part of the vertical resonator including two ultra-highly reflective DBR mirrors of strong refractive index contrast: (i) Δn=2.17 for InP/air-gap DBRs (3.5 periods) using GaInAs sacrificial layers and (ii) Δn=0.5 for Si₃N₄/SiO₂ DBRs (12 periods) with a polymer sacrificial layer to implement the air-cavity. In semiconductor multiple air-gap filters, a continuous tuning of >8% of the absolute wavelength is obtained. Varying the reverse voltage (U=0–5 V) between the membranes (electrostatic actuation), a tuning range of >110 nm was obtained for a large number of devices. The correlation of the wavelength and the applied voltage is accurately reproducible without any hysteresis. In two filters, tuning of 127 and 130 nm was observed for about ΔU=7 V. The extremely wide tuning range and the very small voltage required are record values to the best of our knowledge. For thermally actuated dielectric filters based on polymer sacrificial layers, Δλ/ΔU=-7 nm/V is found. Received: 10 May 2002 / Published online: 8 August 2002     

Magnetic anisotropy of textured CrO2 thin films investigated by X-ray magnetic circular dichroism

Highly a-axis-textured CrO₂ films have been deposited on Al₂O₃ (0001) substrates by chemical vapor deposition. CrO₂ has been found to have highly a-axis (010)-oriented columnar growth on a Cr₂O₃ (0001) initial layer. The six-fold surface symmetry of the Cr₂O₃ initial layer leads to three equivalent in-plane orientations of the a-axis-oriented CrO₂ unit cell. We report Cr L_2,3 X-ray magnetic circular dichroism data along the surface normal and at 60° off-normal sample orientation. For a 60° sample alignment, a strong increase of the projected orbital moment could be observed for unoccupied majority t_2g states using moment analysis. Therefore, the c axis is identified as the intrinsic magnetic easy axis of CrO₂. In addition, a small spin moment and a very strong magnetic dipole term T_z have been found. Received: 8 January 2002 / Accepted: 8 January 2002     

Study of the pore size distribution and fractal dimension of HNO3-treated activated carbons

In the present work, the effect of the oxidizing treatment with nitric acid on three activated carbon samples has been studied. The influence of the acid treatment on the surface groups of the different samples has been investigated by means of FT-IR spectroscopy. The pore size distributions of the different samples were determined by means of the HK and DFT methods. The HK method points out a moderate increment of the microporosity due to the action of the nitric acid, whereas the DFT method shows an increase in the microporosity range above 17 Å. Finally, the values of the fractal dimension reveal that the treatment of the samples with nitric acid leads to chemical reactions of a limited extent.