Improved solid-phase peptide synthesis of ‘difficult peptides’ by altering the microenvironment of the developing sequence

Three types of resins, related to the spacer, environmental and microenvironmental models were prepared by grafting commercial AMP polymer with 2-[2-(2-aminoethylamino)-2-oxoethoxy]acetic acid. All resins were highly loaded and functionalized with Rink-amide linker. A comparative synthesis of the classic difficult sequence ACP (65-74) on the prepared resins by Fmoc/t-Bu chemistry is presented. The ‘microenviromental’ model resin afforded the crude peptide in the highest purity (98%).     

Surface Tension of the 4-Methyl-2-Pentanone/Ethyl Benzoate Binary System in the Temperature Range from 278.15 to 308.15K

Surface tensions (σ) and densities (ρ) of 4-methyl-2-pentanone/ethyl benzoate binary mixtures have been measured over the entire composition range at 278.15, 288.15, 298.15, and 308.15 K. Values of the excess surface tensions (σ^E) and excess molar volumes (V^E) have been calculated. The σ^E and V^E values were fitted by to the Redlich–Kister polynomial equation and the A_k coefficients have been derived. The standard deviations between the calculated and the experimental excess properties have also been derived. The surface tension values have been further used to calculate the surface entropies (S^S) and surface enthalpies (H^S) per unit surface area. The lyophobicity (β) and the surface mole fractions (x₁^S) of the surfactant 4-methyl-2-pentanone have been derived using the extended Langmuir model. The obtained results are discussed from the viewpoint of the existence of specific interactions between unlike molecules in the bulk region and the surface.     

Influence of surface area on charge transport and recombination in dye-sensitized TiO2 solar cells

The dependence of the electron transport and recombination dynamics on the internal surface area of mesoporous nanocrystalline TiO2 films in dye-sensitized solar cells was investigated. The internal surface area was varied by altering the average particle size in the films. The scaling of the photoelectron density and the electron diffusion coefficient at short circuit with internal surface area confirms the results of a recent study (Kopidakis, N.; Neale, N. R.; Zhu, K.; van de Lagemaat, J.; Frank, A. J. Appl. Phys. Lett. 2005, 87, 202106) that transport-limiting traps are located predominately on the surfaces of the particles. The recombination current density was found to increase superlinearly (with an exponent of 1.40 +/- 0.12) with the internal surface area. This result is at odds with the expected linear dependence of the recombination current density on the surface area when only the film thickness is increased. The observed scaling of the recombination current density with surface area is consistent with recombination being transport-limited. Evidence is also presented confirming that photoinjected electrons recombine with redox species in the electrolyte via surface states rather than from the TiO2 conduction band.     

Electrochemical Impedance Spectroscopy and Cyclic Voltammetry of <Emphasis Type="Italic">cis</Emphasis>-[Cr(bipy)<Subscript>2</Subscript>(SCN)<Subscript>2</Subscript>]I (where bipy: 2,2′-Bipyridine) in Polar Solvents

Cyclic voltammetric studies (CV) on the complex cis-bis(2,2′-bipyridine)bis(thiocyanate)chromium(III) iodide [Cr(bipy)₂(SCN)₂]I (where bipy: 2,2′-bipyridine, C₁₀H₈N₂) were recorded on platinum (Pt) and glassy carbon (GC) electrodes in either acetonitrile (ACN) or acetone (ACE) solvent media including n-tetrabutylammonium hexafluorophosphate (NBu₄PF₆) as supporting electrolyte, at scan rates (v) ranging from 0.05 to 0.12 V⋅s⁻¹. In addition, electrochemical impedance spectroscopic (EIS) measurements in the frequency (f) range from 0.1 Hz to 50 kHz were carried out on GC and Pt electrodes. The half-wave potential (E _1/2) of the redox couple Cr(III)/Cr(II) was determined as −0.84 V and −0.79 V (versus Ag/AgCl) in ACN and ACE, respectively. The heterogeneous electron transfer rate constant (k _s) corresponding to the couple Cr(III)/Cr(II) was found to be greater on GC compared to the Pt electrode. The nature of the solvent medium also affects the kinetics of the investigated couple, to be exact, k _s increases remarkably upon replacement of ACE by ACN. The EIS results indicate that the GC electrode is a better capacitor and provides the smaller charge transfer resistance in ACN.     

Elucidating the origin of diastereoselectivity in a self-replicating system: selfishness versus altruism

We have investigated a diastereoselective self‐replicating system based on a cycloaddition of a fulvene derivative and a maleimide using a two‐pronged approach of combining NMR spectroscopy with computational modelling. Two diastereomers are formed with identical rates in the absence of replication. When replication is enabled, one diastereomer takes over the resources as a “selfish” autocatalyst, while exploiting the competitor as a weak “altruist”, resulting in a diastereoselectivity of 16:1. We applied 1D and 2D NMR spectroscopic techniques supported by ab initio chemical shifts as well as ab initio molecular dynamics simulations to study the structure and dynamics of the underlying network. This powerful combination allowed us to decipher the energetic and structural rationale behind the observed behaviour, while static computational methods currently used in the field did not.     

Accelerating chemical reactions: exploring reactive free-energy surfaces using accelerated ab initio molecular dynamics

A biased potential molecular dynamics simulation approach, accelerated molecular dynamics (AMD), has been implemented in the framework of ab initio molecular dynamics for the study of chemical reactions. Using two examples, the double proton transfer reaction in formic acid dimer and the hypothetical adiabatic ring opening and subsequent rearrangement reactions in methylenecyclopropane, it is demonstrated that ab initio AMD can be readily employed to efficiently explore the reactive potential energy surface, allowing the prediction of chemical reactions and the identification of metastable states. An adaptive variant of the AMD method is developed, which additionally affords an accurate representation of both the free-energy surface and the mechanism associated with the chemical reaction of interest and can also provide an estimate of the reaction rate.     

Liquid-liquid phase equilibria of aqueous two-phase systems containing salts and polyethylene glycol

Liquid-liquid phase equilibria of the ternary systems: (a) polyethylene glycol - ammonium sulfate- water and (b) polyethylene glycol - sodium carbonate -water have been determined experimentally at 15°, 25°, 35° and 45°C and for two different molecular weights of the polymer (Avg. M.W. 1000 and 2000). Details of the glass cell and of the equilibration and analytical procedures used are described. Equilibrium data along with phase diagrams are presented. Finally the effect of temperature and of the molecular weight of the polymer are also discussed.     

Aryl‐Phosphonate Lanthanide Complexes and Their Fluorinated Derivatives: Investigation of Their Unusual Relaxometric Behavior and Potential Application as Dual Frequency 1H/19F MRI Probes

A series of low molecular weight lanthanide complexes were developed that have high ¹H longitudinal relaxivities (r₁) and the potential to be used as dual frequency ¹H and ¹⁹F MR probes. Their behavior was investigated in more detail through relaxometry, pH‐potentiometry, luminescence, and multinuclear NMR spectroscopy. Fitting of the ¹H NMRD and ¹⁷O NMR profiles demonstrated a very short water residence lifetime (<10 ns) and an appreciable second sphere effect. At lower field strengths (20 MHz), two of the complexes displayed a peak in r₁ (21.7 and 16.3 mM ^?1 s^?1) caused by an agglomeration, that can be disrupted through the addition of phosphate anions. NMR spectroscopy revealed that at least two species are present in solution interconverting through an intramolecular binding process. Two complexes provided a suitable signal in ¹⁹F NMR spectroscopy and through the selection of optimized imaging parameters, phantom images were obtained in a MRI scanner at concentrations as low as 1 mM . The developed probes could be visualized through both ¹H and ¹⁹F MRI, showing their capability to function as dual frequency MRI contrast agents.