Determination of selected pesticides in environmental water by employing liquid-phase microextraction and liquid chromatography–tandem mass spectrometry

An optimised extraction and cleanup method for the analysis of pesticide in natural water samples is presented. Sixteen pesticides of different polarity and from the different chemical classes (organophosphates, triazines, benzimidazoles, carbamates, carbamides, neonicotinoides, methylureas, phenylureas and benzohydrazides), most frequently used in Serbia, were selected for the analysis. Liquid-phase microextraction in a single hollow fibre (HF-LPME) has been applied for sample preparation. The concentrations of pesticides were determined using HPLC-MS/MS method with electrospray ionisation. The extraction behaviour and selection of the experimental conditions was predicted based on log D and pK _a values of targeted pesticides, which were calculated applying the computer software ACD/Labs PhysChem Suite v12. The influence of the donor pH and concentration of pesticides, organic phase composition as well as the extraction time on the extraction efficiency was investigated. Optimum extraction conditions were evaluated with respect to the investigated parameters of the extraction. The extraction method was validated for 10 out of 16 studied pesticides. Linear range of the pesticides was 0.1–5 μg L⁻¹ with the correlation coefficient from 0.991 to 0.9998, and the relative standard deviation for three standard measurements was between 0.2 and 11.8%. The limits of detections ranged from 0.026 to 0.237 μg L⁻¹ and the limits of quantifications from 0.094 to 0.793 μg L⁻¹. The optimised two-phase HF-LPME method was successfully applied for determination of moderately polar as well low-polar pesticides in the environmental water samples.     

Forecasting the damaging factors during transport accidents with the participation of yellow phosphorus

The damaging factors that can arise from an accident during the transportation of phosphorus are predicted with allowance for the hazardous properties of phosphorus that are a consequence of its reactivity. The presented method of estimating the consequences can be used to solve the tasks of managing a man-made risk at the stage of transporting the product of the chemical industry under consideration.     

Reversal of Tabun Toxicity Enabled by a Triazole-Annulated Oxime Library—Reactivators of Acetylcholinesterase

Acetylcholinesterase (AChE), an enzyme that degrades the neurotransmitter acetylcholine, when covalently inhibited by organophosphorus compounds (OPs), such as nerve agents and pesticides, can be reactivated by oximes. However, tabun remains among the most dangerous nerve agents due to the low reactivation efficacy of standard pyridinium aldoxime antidotes. Therefore, finding an optimal reactivator for prophylaxis against tabun toxicity and for post-exposure treatment is a continued challenge. In this study, we analyzed the reactivation potency of 111 novel nucleophilic oximes mostly synthesized using the CuAAC triazole ligation between alkyne and azide building blocks. We identified several oximes with significantly improved in vitro reactivating potential for tabun-inhibited human AChE, and in vivo antidotal efficacies in tabun-exposed mice. Our findings offer a significantly improved platform for further development of antidotes and scavengers directed against tabun and related phosphoramidate exposures, such as the Novichok compounds.     

Structure of synthetic erionite (zeolite T)

Summary Zeolite T is a synthetic analog of the natural-occurring zeolite-erionite.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1116–1118, June, 1965     

Multiscale modeling of multiphase "in situ" composite

The elastic-plastic behaviour of rapidly solidified Al based (FeSi)-enriched alloys containing intermetallic compounds is considered. A new multilevel mechanical model for the “in situ” composite is proposed considering the aluminium matrix as a micropolar elastic plastic Cosserat material and the hardening phases as pure elastic ones. A two steps homogenization procedure is applied to obtain the overall properties of the multiphase “in situ“ composite, taking into account the existence of different sizes of intermetallic inclusions. A variational approach is applied to evaluate the equivalent stress on macro level at the transition from micro to macro scale. The model is developed using information provided by microstructural investigations and EDX analysis. The multistage bulk material manufacturing process from rapid solidified powders or ribbons is simulated using the Finite Element Method. The model is implemented as user subroutines into the FE code MARC. Numerical simulations are provided, corresponding to different values of metal forming parameters. The influence of the different inclusions sizes on the hardening behavior is discussed. (© 2010 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fragmentation and erosion of two-dimensional aggregates in shear flow

We consider single two-dimensional aggregates containing glass particles trapped at a water/oil or water/air interface. Two modes for aggregate break-up are observed: break-up by fragmentation into a few parts and break-up by erosion of single particles. We have studied the critical shear rate for these modes as a function of the aggregate size. Two different particle sizes were used. The smaller particles, with a radius of 65 microm, form aggregates that break up predominantly by erosion at a shear rate between 0.5 and 0.7 s(-1). This value hardly depends on the size of the aggregates. The larger particles, with a radius of 115 microm, form aggregates that break by erosion or by fragmentation. In both modes, the critical shear rate again depends only weakly on the size of the aggregates and ranges between 1.6 and 2.2 s(-1). Also the structural changes inside the aggregate before break-up were studied. The aggregate behavior at the water/air and water/oil interfaces is quite similar. The critical shear rate for break up was also modeled. The model shows in both modes a weak dependence of the critical shear rate on the aggregate size, which is consistent with the experimental observations. The kinetics of the erosion process was also modeled and compared with the experimentally obtained time dependence of the aggregate size. The differences in the large and small particle systems can be attributed to the occurrence of friction forces between the particles, which one expects to be much larger for the large particle system, due to the stronger two-particle interaction.     

Technical and radiological characterisation of fly ash and bottom ash from thermal power plant

Journal of Radioanalytical and Nuclear Chemistry - Huge quantities of fly ash and bottom ash are generated from thermal power plants and it presents great concern for country, mainly due...     

Spectrophotometric Determination of Molybdenum(VI) as a Ternary Complex with 4-Nitrocatechol and Benzalkonium Chloride

A new liquid—liquid extraction system for molybdenum(VI) was studied. It contains 4-nitrocatechol (4NC) as a complexing chromogenic reagent and benzalkonium chloride (BZC) as a source of heavy cations (BZ⁺), which are prone to form chloroform-extractable ion-association complexes. The optimum conditions for the determination of trace molybdenum(VI) were found: concentrations of 4NC and BZC (7.5 × 10⁻⁴ mol dm⁻³ and 1.9 × 10⁻⁴ mol dm⁻³, respectively), acidity (3.75 × 10⁻² mol dm⁻³ H₂SO₄), extraction time (3 min), and wavelength (439 nm). The molar absorptivity, limit of detection, and linear working range were 5.5 × 10⁴ dm³ mol⁻¹ cm⁻¹, 5.6 ng cm⁻³, and 18.6–3100 μg cm⁻³, respectively. The effect of foreign ions was examined, and the developed procedure was applied to the analysis of synthetic mixtures and real samples (potable waters and steels). The composition of the extracted complex was 1:1:2 (Mo:4NC:BZ). Three possible structures of its anionic part [Mo^VI(4NC)O₂(OH)₂]²⁻ were discussed based on optimizations at the B3LYP/3-21G level of theory, and simulated UV/Vis absorption spectra were obtained with the TD Hamiltonian.     

Numerical investigation of microstructure evolution in metal forming processes

Grain size evolution and phase transformation during metal forming processes is investigated numerically by means of the Finite element method. Appropriate microstructure models are involved into the FEM code MSC.MARC. Material characteristics obtained by means of own experiments are used. Hot closed die forging and rod rolling are considered. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)