Current-induced coupling between conductance channels in membranes

The driven system of conducting channels in a nerve membrane is investigated. A current flow generates a coupling between the channels: the current through a channel is influenced by the presence of other conducting channels via the deformation of the equipotential surfaces within the media adjacent to the membrane. We derive an integral equation for the membrane voltageV(s) (s in the membrane plane) and solve it for different membrane conductance distributions(s) including models for stochastic distributions of conducting channels.V(s) is a nonlinear functional of(s). The system of coupled channels is compared with an Ising model. The system exhibits a multi-channel interaction which can be characterized by two different rangesd _int andD ₁. For a mean channel distanced ₀d _int interaction effects are negligible, and ford ₀D ₁ all channel-voltages are equal and thus represent a mean-field for the channels. Increasing conductivity of the medium decreasesd _int and increasesD ₁. With experimental data on sodium channels in nerve membranes we find:d _intd ₀, i.e. a 50% decrease of the channel-voltages by the interaction, andD ₁10³10⁴ d ₀, which indicates mean-field behaviour of the channels. In a subsequent paper we shall treat the statistics of channels which open and close stochastically under the influence of the local membrane voltage.     

Possibilities and limitations of an enzyme-linked immunosorbent assay for the detection of 1-nitropyrene in air particulate matter

ELISAs (enzyme-linked immunosorbent assays) are generally used in environmental analytical chemistry for screening purposes. In this work the applicability of a polyclonal-based 1-nitropyrene-ELISA for the quantification of the target analyte in air particulate matter was investigated. Validation was performed using an HPLC method with fluorescence detection of the reduced form of 1-nitropyrene. It was found that the immunoassay is not only sensitive for the target analyte but to a certain extent also for other cross-reacting molecules present in the sample, such as 2-nitropyrene and 2-nitrofluoranthene, which were identified by GC-HRMS and are considered to be products of photochemically induced reactions of pyrene or fluoranthene, respectively. The degree of correlation between ELISA and HPLC results for collected samples of air particulate matter was inversely dependent on the distance between the sampling location and the source.     

First anhydrous gold perchlorato complex: ClO(2)Au(ClO(4))(4). Synthesis and molecular and crystal structure analysis

Chlorine trioxide, Cl(2)O(6), reacts with Au metal, AuCl(3), or HAuCl(4).nH(2)O to yield the well-defined chloryl salt, ClO(2)Au(ClO(4))(4). The crystal and molecular structure of ClO(2)Au(ClO(4))(4) was solved by a Rietveld analysis of powder X-ray diffraction data. The salt crystallizes in a monoclinic cell, space group C2/c, with cell parameters a = 15.074(5), b = 5.2944(2), and c = 22.2020(2) A and beta = 128.325(2) degrees. The structure displays discrete ClO(2)(+) ions lying in channels formed by Au(ClO(4))(4)(-) stacks. Au is located in a distorted square planar environment: Au-O = 1.87 and 2.06 A. [ClO(4)] groups are monodentate with ClO(b) = 1.53 and ClO(t) = 1.39 A (mean distances; O(b), oxygen bonded to Au; O(t), free terminal oxygen). A full vibrational study of the Au(ClO(4))(4)(-) anion is supported by DFT calculations.     

Underpotential deposition of hydrogen on benzene-modified Pt(111) in aqueous H2SO4

The Pt(111) electrode is modified by an overlayer of C6H6 (ads) upon its cycling in the 0.05-0.80 V range in aq H2SO4 + 1 mM C6H6. The C6H6 (ads) overlayer significantly changes the underpotential-deposited H (H(UPD)) and anion adsorption, and cyclic-voltammetry (CV) profiles show a sharp cathodic peak and an asymmetric anodic one in the 0.05-0.80 V potential range. The C6H6 (ads) layer blocks the (bi)sulfate adsorption but facilitates the adsorption of one monolayer of H(UPD). Cycling of the benzene-modified Pt(111) in benzene-free aq 0.05 H2SO4 from 0.05 to 0.80 V results in a partial desorption of C6H6 (ads) and in a partial recovery of the CV profile characteristic of an unmodified Pt(111). The peak potential of the cathodic and anodic feature is independent of the scan rate, s (10 < or = s < or = 100 mV s(-1)), and the peak current density increases linearly with an increase of the scan rate. Temperature variation modifies the peak potential and current density but does not affect the charge density of the cathodic or anodic feature. Temperature-dependent studies allow us to determine the thermodynamic state function for the H(UPD) adsorption and desorption. Delta G degrees(ads)(H(UPD))assumes values from -4 to -12 kJ mol(-1), while has values from 9 to 14 kJ mol(-1). The values of delta Delta G degrees (delta Delta G degrees = delat Delta G degrees(ads) + delta Delta D degrees(des)) decrease almost linearly from 6 kJ mol(-1) at theta(H(UPD) --> 0 to 0 kJ mol(-1) at theta(H(UPD) --> 1. The nonzero values of delta Delta G degrees testify that the adsorbing and desorbing H(UPD) adatoms interact with an energetically different substrate. The lateral interactions changed from repulsive (omega = 29 kJ mol(-1) at theta(H(UPD) --> 0) to attractive (omega = -28 kJ mol(-1) at theta(H(UPD) --> 1) as the H(UPD) coverage increases. The values of delta S degrees(ads)(H(UPD)) increase from 19 to 56 J K(-1) mol(-1), while those of delta S degrees(des)(H(UPD)) decrease from 45 to -30 J K(-1) mol(-1) with an increase of H(UPD) coverage. The values of delta H degrees(des)(H(UPD)) and delta H degrees(des)(H(UPD)) vary from 0 to 27 kJ mol(-1). The Pt(111)-H(UPD) surface bond energy at the benzene-modified Pt(111) electrode falls in the 191-218 kJ mol(-1) range and is weaker than in the case of the unmodified Pt(111) electrode in the same electrolyte.     

Towards stationary phases for chromatography on a microchip: molded porous polymer monoliths prepared in capillaries by photoinitiated in situ polymerization as separation media for electrochromatography

Photoinitiated free radical polymerization has been used for the preparation of porous polymer monoliths within UV transparent fused silica capillaries and quartz tubes. These formats were used as models for the preparation of the separation media within channels of microfabricated devices. A mixture of ethylene dimethacrylate, butyl methacrylate, and 2-acrylamido-2-methyl-1-propanesulfonic acid was polymerized in the presence of a porogenic solvent consisting of 1-propanol, 1,4-butanediol, and water at room temperature under UV irradiation. Modification of the porogen composition enables the tailoring of pore size within the broad range from ca. 100 to 4000 nm. Scanning electron micrographs confirmed the homogeneity of the porous structure of the materials prepared, even in a quartz tube with a diameter as large as 4 mm. Separation properties of the resulting capillary columns were tested in capillary electrochromatography (CEC) mode using a mixture of thiourea and eight aromatic compounds. Plate number as high as 210 000 plates/m were found for a capillary column with optimized porous properties. The monolithic columns were also able to separate mixtures of peptides.     

Formation and reactions of metal-metal bonded heterobimetallic (C5H4PR2)-bridged (Zr-Ir) and (Zr-Rh) complexes: evidence for the participation of metal hydride intermediates

Treatment of the complexes [(C(5)H(4)PR(2))(2)Zr(CH(3))(2)](b: R = isopropyl; c: R = cyclohexyl) with the reagent HIr(CO)(PPh(3))(3) (2b) yield the heterobimetallic complexes [mu-C(5)H(4)PR(2))(2)(H(3)C-Zr-Ir(CO)(PPh(3)))] (4b, 4c) with evolution of methane. The reaction of the -PPh(2) substituted analogue with initially yields an intermediate [(H(3)C)(2)Zr(mu-C(5)H(4)PPh(2))(2)Ir(H)(CO)(PPh(3))] 5a, that still contains both methyl groups at zirconium and does not contain a metal-metal bond. At room temperature, the intermediate reacts further with methane formation to eventually yield the (Zr-Ir) complex 4a. The corresponding [mu-C(5)H(4)PR(2))(2)(H(3)C-Zr-Rh(CO)(PPh(3)))] complexes 3a (R = Ph) and 3b (R = isopropyl) react cleanly with isopropyl alcohol to liberate methane and yield the corresponding [mu-C(5)H(4)PR(2))(2)(Me(2)CHO-Zr-Rh(CO)(PPh(3)))] products (7a, 7b). Carefully monitoring the reaction of with Me(2)CHOH by NMR revealed that the Zr-Rh functionality is attacked first to give the intermediate [Me(Me(2)CHO)Zr([micro sign]-C(5)H(4)PR(2))(2)Rh(H)(CO)(PPh(3))] (6b). This intermediate then reacts further to cleave off methane and re-form the (Zr-Rh) metal-metal bond to yield the product 7b. The tetrametallic mu-oxo-(Zr-Rh) metallocene derivate 11a was obtained starting from the (Zr-Rh) complex 3a and it was characterized by X-ray diffraction. It may be that this reaction is also initiated by H-OH addition to the [Zr-Rh] metal-metal bond.     

Photolithographically patternable nitrate-sensitive acrylate-based membrane

A photocurable acrylate matrix nitrate-sensitive membrane containing 2-nitrophenyl n-octyl ether as mediator and tetraalkylammonium nitrate as an active compound is described. The photocuring was achieved by the use of photoinitiators containing diaryliodonium chloride. This acrylate membrane is patternable via a photolithographic process with a only slight loss of electrochemical characteristics.     

In vitro nitrosation of ephedrine in the presence of cyclodextrins

-, and -cyclodextrin and heptakis-2,6-di-O-methyl--cyclodextrin enhance the nitrosation rate of l-ephedrine if the nitrosation assay procedure (NAP test) is applied. During this reaction with -cyclodextrin a solid inclusion compound of -cyclodextrin andN-nitrosoephedrine precipitates. Solubilities and stabilities of inclusion compounds of the cyclodextrins with ephedrine and nitrosoephedrine, respectively, explain especially the catalytic effects of some cyclodextrins on ephedrine.Part of the PhD thesis of V. Wedelich, Freie Universität Berlin, 1985.     

Structural-chemical disorder of manganese dioxides 1. Influence on surface properties at the solid-electrolyte interface

Relationships between lattice parameters of manganese dioxides and their surface properties at the solid-aqueous solution interface were investigated. The studied series ranged from ramsdellite to pyrolusite and encompassed disordered MD samples. The structural model used takes into account structural defects: Pr (rate of pyrolusite intergrowth) and Tw (rate of microtwinning). Water adsorption isotherms showed that the cross sectional area of water molecules adsorbed in the first monolayer is positively correlated to Pr. Titration of the surface charge of the MD series evidenced a positive linear relationship between the PZC and Pr (Pr=0, Tw=0, PZC=1 for ramsdellite; Pr=1, Tw=0, PZC=7.3 for pyrolusite; gamma-MD with intermediate values of Pr (0.2 to 0.45) have increasing PZC values). The rate of microtwinning appeared as a secondary factor for the increase of the PZC. The above correlations are explained by the chemical defects at the origin of the structural disorder, respectively Mn(3+)/Mn4+ substitution for Pr and Mn vacancies for Tw, which result in proton affinity and thus in increased PZC. The experimental results are compared with data collected in the literature for manganese dioxides as well as for dioxides of transition elements with tetragonal structure.     

Synthesis of new derivatives of 4-amino-2,4-dihydro-1,2,4-triazol-3-one as potential antibacterial agents

Thirty new 2-substituted-4-amino-5-alkyl or aryl-2,4-dihydro-1,2,4-triazol-3-ones and ten 2-substituted-5-alkyl or aryl-4-(5-nitro-2-furfurylidene)amino-2,4-dihydro-1,2,4-triazol-3-ones were synthesized and characterised by their sharp melting points, elemental analysis, ir and ¹H nmr spectra. These new derivatives of 5-nitro-2-furaldehyde were screened for their antibacterial activities. Most of the compounds showed good activity against one test organism, Staphylococcus aureus. For a few compounds, C.M.I. ranged from 4 to 8 μg/ml (higher results than nitrofurantoin).