Investigation of the incorporation of electrolyte anions in porous anodic Al2O3 films by employing a suitable probe catalytic reaction

A new method has been developed capable of describing the incorporation of electrolyte anions along the pore wall surface and across both the barrier layer and the pore wall oxide after the establishment of the steady state of growth of porous anodic Al₂O₃ where other methods cannot be applied to obtain reliable results. The knowledge of the nature/composition of anodic oxides as regards the incorporation of species like electrolyte anions is of specific importance for both the understanding of the electrochemical mechanism of oxide production and growth and the scientific and technological applications of porous anodic Al₂O₃ films. The method consists of the selection and use of a suitable catalytic probe reaction on porous anodic oxides at thicknesses varying from a value near zero up to the maximum limiting thickness and the treatment of the experimental reaction rate results by a properly developed mathematical formalism. This method was employed in anodic Al₂O₃ films prepared in H₂SO₄ anodizing electrolyte at a constant bath temperature and different current densities using as a probe reaction the decomposition of HCOOH on these oxides, which is almost exclusively a dehydration reaction, at relatively high reaction temperatures, 350 °C and 390 °C, where the effect of other species except SO₄ ²⁻ incorporated in the oxide on the reaction rate is eliminated. It has been shown that the fraction of the intercrystallite surfaces occupied by SO₄ ²⁻ follows a parabola-like distribution. It has a significant value at the pore base surface, depending on the current density, then it passes through a maximum along the pore wall surface and across both the barrier layer and the pore walls near the pore bases at positions depending on the current density and then becomes almost zero at the mouths of the pores of the oxide with the maximum limiting thickness and at both the Al₂O₃/Al interface and cell boundaries. The maximum value of the surface coverage is almost independent of the current density and is always near 1, showing an almost complete saturation of intercrystalline surfaces at these positions. The above distribution of surface coverage predicts a qualitatively similar distribution of the SO₄ ²⁻ bulk concentration across both the barrier layer and pore wall oxide around the pore bases. The method may be improved and developed further either for a more detailed investigation of the above films or to investigate films prepared in other pore-forming electrolytes. Received: 30 July 1998 / Accepted: 30 September 1998     

Self‐Assembling Nanomaterials using Magnetic Nanoparticles Modified with Polystyrene Brushes

Magnetic nanomaterials have been studied in order to generate novel nanocomposites that display both the magnetic properties of the nanoparticles and the ability to self‐assemble of the amorphous block copolymer matrix. Towards this goal, iron oxide magnetic nanoparticles have been modified with PS brushes by ATRP in order to improve both the dispersion and the affinity of the nanoparticles with one of the blocks of a polystyrene‐block‐polybutadiene‐block‐polystyrene block copolymer. This method of preparation of nanocomposites opens new strategies for the generation of magnetic nanomaterials. The samples are characterized using DSC and atomic and magnetic force microscopies.

     

A statistical model of free-radical copolymerization/crosslinking reactions

A statistical model for network formation by the free-radical copolymerization and crosslinking reaction with small crosslinker content is used to obtain expressions for structural averages as a function of reaction parameters. The analysis accounts for reaction features that are characteristic of free-radical mechanisms and can be adapted to include cyclization, various modes of termination, and the gel effect. Profiles for structural averages such as the weight average molecular weight, the sol weight fraction, the molecular weight between crosslinks, and the number of elastically active network chains are obtained as functions of conversion.     

Synthesis, structural characterization, and biological studies of new antimony(III) complexes with thiones. The influence of the solvent on the geometry of the complexes

Five new antimony(III) complexes with the heterocyclic thiones 2-mercapto-benzimidazole (MBZIM), 5-ethoxy-2-mercapto-benzimidazole (EtMBZIM), and 2-mercapto-thiazolidine (MTZD) of formulas {[SbCl(2)(MBZIM)4]+.Cl-.2H(2)O. (CH(3)OH)} (1), {[SbCl(2)(MBZIM)4]+.Cl-.3H(2)O.(CH3CN)} (2), [SbCl(3)(MBZIM)2] (3), [SbCl(3)(EtMBZIM)(2)] (4), and [SbCl(3)(MTZD)2] (5) have been synthesized and characterized by elemental analysis, FT-IR, far-FT-IR, differential thermal analysis-thermogravimetry, X-ray diffraction, and conductivity measurements. Complex {[SbCl2(tHPMT)(2)]+Cl-}, (tHPMT = 2-mercapto-3,4,5,6-tetrahydro-pyrimidine), already known, was also prepared, and its X-ray crystal structure was solved. It is shown that the complex is better described as {[SbCl3(tHPMT)(2)]} (6). Crystal structures of all other complexes (1-5) have also been determined by X-ray diffraction at ambient conditions. The crystal structure of the hydrated ligand, EtMBZIM.H2O is also reported. Compound [C(28)H(24)Cl(2)N(8)S(4)Sb.2H(2)O.Cl.(CH(3)OH)] (1) crystallizes in space group P2(1), with a = 7.7398(8) A, b = 16.724(3) A, c = 13.717(2) A, beta = 98.632(11) degrees, and Z = 2. Complex [C(28)H(24)Cl(2)N(8)S(4)S(b).Cl.3H(2)O.(CH(3)CN)] (2) corresponds to space group P2(1), with a = 7.8216(8) A, b = 16.7426(17) A, c = 13.9375(16) A, beta = 99.218(10) degrees , and Z = 2. In both 1 and 2 complexes, four sulfur atoms from thione ligands and two chloride ions form an octahedral (Oh) cationic [SbS(4)Cl(2)]+ complex ion, where chlorides lie at axial positions. A third chloride counteranion neutralizes it. Complexes 1 and 2 are the first examples of antimony(III) compounds with positively charged Oh geometries. Compound [C(14)H(12)Cl(3)N(4)S(2)S(b)] (3) crystallizes in space group P, with a = 7.3034(5) A, b = 11.2277(7) A, c = 12.0172(8) A, alpha = 76.772(5) degrees, beta = 77.101(6) degrees, gamma = 87.450(5) degrees, and Z = 2. Complex [C(18)H(20)Cl(3)N(4)O(2)S(2)S(b)] (4) crystallizes in space group P1, with a = 8.6682(6) A, b = 10.6005(7) A, c = 13.0177(9) A, alpha = 84.181(6) degrees, beta = 79.358(6) degrees, gamma = 84.882(6) degrees, and Z = 2, while complex [C(6)H(10)Cl(3)N(2)S(4)S(b)] (5) in space group P2(1)/c shows a = 8.3659(10) A, b = 14.8323(19) A, c = 12.0218(13) A, beta = 99.660(12) degrees, and Z = 4 and complex [C(8)H(16)Cl(3)N(4)S(2)S(b)] (6) in space group P1 shows a = 7.4975(6) A, b = 10.3220(7) A, c = 12.1094(11) A, alpha = 71.411(7) degrees, beta = 84.244(7) degrees, gamma = 73.588(6) degrees, and Z = 2. Crystals of complexes 3-6 grown from acetonitrile solutions adopt a square-pyramidal (SP) geometry, with two sulfur atoms from thione ligands and three chloride anions around Sb(III). The equatorial plane is formed by two sulfur and two chloride atoms in complexes 3-5, in a cis-S, cis-Cl arrangement in 3 and 5 and a trans-S, trans-Cl arrangement in 4. Finally, in the case of 6, the equatorial plane is formed by three chloride ions and one sulfur from the thione ligand while the second sulfur atom takes an axial position leading to a unique SP conformation. The complexes showed a moderate cytostatic activity against tumor cell lines.     

Polyoxomolybdenum(V/VI)-sulfite compounds: synthesis, structural, and physical studies

Reaction of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) in the mixed-solvent system H(2)O/CH(3)CN (pH = 5) resulted in the formation of the tetranuclear cluster (NH(4))(4)[Mo(4)(VI)SO(16)] x H(2)O (1), while the same reaction in acidic aqueous solution (pH = 5) yielded (NH(4))(4)[Mo(5)(VI)S(2)O(21)] x 3H(2)O (2). Compound {(H(2)bipy)(2)[Mo(5)(VI)S(2)O(21)] x H(2)O}(x) (3) was obtained from the reaction of aqueous acidic solution of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) (pH = 2.5) and 4,4'-bipyridine (4,4'-bipy). The mixed metal/sulfite species (NH(4))(7)[Co(III)(Mo(2)(V)O(4))(NH(3))(SO(3))(6)] x 4H(2)O (4) was synthesized by reacting Na(2)Mo(VI)O(4) x 2H(2)O with CoCl(2) x 6H(2)O and (NH(4))(2)SO(3) with precise control of pH (5.3) through a redox reaction. The X-ray crystal structures of compounds 1, 2, and 4 were determined. The structure of compound 1 consists of a ring of four alternately face- and edge-sharing Mo(VI)O(6) octahedra capped by the trigonal pyramidal sulfite anion, while at the base of the Mo(4) ring is an oxo group which is asymmetrically shared by all four molybdenum atoms. Compound 3 is based on the Strandberg-type heteropolyion [Mo(5)(VI)S(2)O(21)](4-), and these coordinatively saturated clusters are joined by diprotonated 4,4'-H(2)bipy(2+) through strong hydrogen bonds. Compound 3 crystallizes in the chiral space group C2. The structure of compound 4 consists of a novel trinuclear [Co(III)Mo(2)(V)SO(3)(2-)] cluster. The chiral compound 3 exhibits nonlinear optical (NLO) and photoluminescence properties. The assignment of the sulfite bands in the IR spectrum of 4 has been carried out by density functional calculations. The cobalt in 4 is a d(6) octahedral low-spin metal atom as it was evidenced by magnetic susceptibility measurements, cw EPR, BVS, and DFT calculations. The IR and solid-state UV-vis spectra as well as the thermogravimetric analyses of compounds 1-4 are also reported.     

Determination of 13 synthetic food colorants in water-soluble foods by reversed-phase high-performance liquid chromatography coupled with diode-array detector

A reversed-phase high performance liquid chromatographic method for the successful separation and determination of 13 synthetic food colorants (Tartrazine E 102, Quinoline Yellow E 104, Sunset Yellow E 110, Carmoisine E 122, Amaranth E 123, Ponceau 4R E 124, Erythrosine E 127, Red 2G E 128, Allura Red AC E 129, Patent Blue V E 131, Indigo Carmine E 132, Brilliant Blue FCF E 133 and Green S E 142) was developed. A C18 stationary phase was used and the mobile phase contained an acetonitrile-methanol (20:80 v/v) mixture and a 1% (m/v) ammonium acetate buffer solution at pH 7.5. Successful separation was obtained for all the compounds using an optimized gradient elution within 29 min. The diode-array detector was used to monitor the colorants between 350 and 800 nm. The method was thoroughly validated. Detection limits for all substances varied between 1.59 (E 142) and 22.1 (E 124) μg L⁻¹. The intra-day precision (as R.S.D._r) ranged from 0.37% (E 122 in fruit flavored drink at a concentration of 100 mg L⁻¹) to 4.8% (E 142 in icing sugar at a level of 0.9 mg kg⁻¹). The inter-day precision (as R.S.D._R) was between 0.86% for E 122 in fruit flavored drink at 100 mg L⁻¹ and 10% for E142 in jam at a concentration of 9 mg kg⁻¹. Satisfactory recoveries, ranging from 94% (E 142 in jam) to 102% (E 131 in sweets), were obtained. The method was applied to the determination of colorants in various water-soluble foods, such as fruit flavoured drinks, alcoholic drinks, jams, sugar confectionery and sweets, with simple pre-treatment (dilution or water extraction).     

Simultaneous liquid chromatographic determination of metals and organic compounds in pharmaceutical and food-supplement formulations using evaporative light scattering detection

A novel method for the non-derivatization liquid chromatographic determination of metals (potassium, aluminium, calcium and magnesium) and organic compounds (ascorbate and aspartate) was developed and validated based on evaporative light scattering detection (ELSD). Separation of calcium, magnesium and aluminium was achieved by the cation exchange column Dionex CS-14 and an aqueous TFA mobile phase according to the following time program: 0-6 min TFA 0.96 mL L⁻¹, 6-7 min linear gradient from TFA 0.96-6.4 mL L⁻¹. Separation of potassium, magnesium and aspartate was achieved by the lipophilic C₁₈ Waters Spherisorb column and isocratic aqueous 0.2 mL L⁻¹ TFA mobile phase. Separation of sodium, magnesium, ascorbate and citrate was also achieved by the C₁₈ analytical column, according to the following elution program: 0-2.5 min aqueous nonafluoropentanoic acid (NFPA) 0.5 mL L⁻¹; 2.5-3.5 min linear gradient from 0.5 mL L⁻¹ NFPA to 1.0 mL L⁻¹ TFA. In all cases, evaporation temperature was 70 °C, pressure of the nebulizing gas (nitrogen) 3.5 bar, gain 11 and the flow rate 1.0 mL min⁻¹. Resolution among calcium and magnesium was 1.8, while for all other separations was ≥3.2. Double logarithmic calibration curves were obtained within various ranges from 3-24 to 34-132 μg mL⁻¹, and with good correlation (r > 0.996). Asymmetry factor ranged from 0.9 to 1.9 and limit of detection from 1.3 (magnesium) to 17 μg mL⁻¹ (ascorbate).The developed method was applied for the assay of potassium, magnesium, calcium, aluminium, aspartate and ascorbate in pharmaceuticals and food-supplements. The accuracy of the method was evaluated using spiked samples (%recovery 95-105%, %R.S.D. < 2) and the absence of constant or proportional errors was confirmed by dilution experiments.