采用可见光源和分划板快速装调激光光路

 分析了激光测量光路的特点和装校要求,给出了采用可见光源、分划板装校激光光路的原理。以预放测量模块为例,介绍了装校的流程及装校中的注意事项,分析了装校所能达到的精度,并用内调焦望远镜进行了装校精度检查。结果表明,采用可见光源、分划板装校的激光光路透镜光轴正过心的偏心极限误差小于等于0.07 mm,光轴倾斜极限误差小于等于25″。     

Equivalent properties of single event burnout induced by different sources

The experimental results of single event burnout induced by heavy ions and 252Cf fission fragments in power MOSFET devices have been investigated. It is concluded that the characteristics of single event burnout induced by 252Cf fission fragments is consistent to that in heavy ions. The power MOSFET in the "turn-off" state is more susceptible to single event burnout than it is in the "turn-on" state. The thresholds of the drain-source voltage for single event burnout induced by 173 MeV bromine ions and 252Cf fission fragments are close to each other, and the burnout cross section is sensitive to variation of the drain-source voltage above the threshold of single event burnout. In addition, the current waveforms of single event burnouts induced by different sources are similar. Different power MOSFET devices may have different probabilities for the occurrence of single event burnout.     

New mechanisms of optical writing/reading in magnetic media

Optical detection of magnetic features of 0.1 μm or less in size, as well as their generation and motion due to laser shots, is described. The physical effects discovered make it possible to implement the basic functions of a memory device (writing, shift in a storage register, and reading) by purely optical means. These effects can form a basis for designing novel ultra-high-density solid-state memories with optical access and control.     

Radiation technology in medicine: Part 2. Using isotopes in nuclear medicine

In this article, we discuss the role of radionuclide technologies among other nuclear methods used in medicine. We analyze the condition and perspectives of the development of nuclear technology with regard to using radionuclides in medicine, for brachytherapy in particular. We review the modern use of radionuclide facilities in medicine.     

掺杂和未掺杂氧化锌薄膜的拉曼光谱

利用拉曼光谱分别对不同衬底上,未掺杂和掺杂以及掺杂浓度不同的ZnO薄膜进行了系统的分析研究。其中ZnO薄膜均由溶胶-凝胶法制得,掺杂源为LiCl。测得的拉曼光谱显示,Pt/Ti/SiO2/Si衬底上生长的ZnO薄膜的拉曼特征峰(437cm-1)的强度明显高于SiO2/Si衬底上ZnO薄膜的拉曼特征峰的强度,说明Pt/Ti/SiO2/Si衬底上ZnO的晶化程度比SiO2/Si上ZnO的晶化程度高;但ZnO拉曼特征峰的位置和半高宽并没有发生变化,说明两种衬底上ZnO薄膜中应力大小没有发生变化。掺Li+后,580cm-1处的峰位向高频方向移动,且掺杂浓度越大频移量越大,说明掺杂已经在不同程度上引起了ZnO晶体中自由载流子浓度的变化。此外,还分析了掺Li+未在很大程度上引起ZnO晶格畸变的原因。     

光声喇曼光谱的理论分析

对光声喇曼光谱(PARS)作了系统的理论分析,分别导出固体和液体介质中的光声喇曼光谱的信号表达式,并进行了数值估算。 关键词：     

Modelling the metabolic action of human and rat CYP1A2 and its relationship with the carcinogenicity of heterocyclic amines

Cytochrome P450 (CYP) is a family of enzymes responsible for organism detoxification. However, some of the members of the CYP1A subfamily also catalyse the activation of heterocyclic amines (HAs), present in cooked meat, to carcinogenic compounds which have been shown to increase the risk of breast, colorectal and lung cancer. In humans, CYP1A2 is the enzyme with the most significant action in HA metabolism but in rodents CYP1A1 is also important in this biotransformation. Understanding the metabolic action of these enzymes is essential to predict the factors that enable the formation of the carcinogenic products. We have built two models of CYP1A2, one for the human enzyme and one for the rat homologue. The templates chosen include the only X-ray structure published to date for a mammal CYP, a quimeric C2A5 from rabbit, as well as CYPs belonging to Bacillus megaterium (CYPBm-3), Pseudomonas putida (CYPcam), Pseudomonas sp. (CYPterp), and Saccharopolyspora erythraea (CYPeryf). Two HAs, MeIQ (2-amino-3,4-dimethylimidazo[4,5-?]quinoline) and MeIQx (2-amino-3,8-dimethylimidazo[4,5-?]quinoxaline), known substrates of human and rat CYPIA2, were docked in the active site of the models, providing information regarding the different catalytic rates associated with the metabolisms in both enzymes. This is important for analysing the behaviour of animal models concerning the testing of anticancer drugs.     

高分辨率多光谱数字相机电子学系统的设计

设计了一种基于多光谱技术的机载数字相机电子学系统。它包括时序产生单元、信号处理单元、信号控制单元、数据输出接口单元和数据采集存储单元等几部分。系统具有调光和行频调节功能,用以满足在不同能量状态和不同飞行高度下的成像质量。考虑到机载设备的特殊要求,对其进行了轻量化设计和机载稳定平台设计。它具有实时高速存储和实时采集数据的功能。结果表明,机载数字相机电子学系统的各种功能完全满足设计要求,为实现高分辨率探测提供了保证。