Thermal conductivity of open‐cell polyolefin foams

The thermal conductivity and the cellular structure of novel open‐cell polyolefin foams produced by compression molding and based on blends of an ethylene‐vinyl acetate copolymer (EVA) and a low‐density polyethylene (LDPE) have been studied in the temperature range between 24 and 50 °C. The experimental results have shown that the cellular structure of the analyzed materials has interconnected cells because of the presence of large and small holes in the cell walls, this structure being clearly different to the typical structure of open‐cell polyurethane foams. It has been found that at low temperatures the materials have a slightly higher thermal conductivity than closed‐cell polyolefin foams of similar densities. The different mechanisms of heat flow, conduction, convection, and radiation have been analyzed by using experimental measurements and a theoretical model. It has been proved that, in spite of having an open‐cell structure, the convention mechanism is negligible, being the radiation mechanism the one which made different the conductivity of materials with varying cellular structures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 212–221, 2008     

Self-organisation,orientation and magnetic properties of FePt nanoparticle arrays

Self-organised magnetic arrays (SOMA) of high anisotropy particles are a promising candidate for ultra-high-density recording media. In principle SOMA media have the capability of storing 1 bit per particle, leading to possible reecording densities in excess of 10 Tbit/sq in. In this paper we consider two major aspects of SOMA media, namely the self-organisation process itself and the physics of the particle orientation process.     

Poly(styrene–b–ethylene/butylene–b–styrene)/cobalt ferrite magnetic nanocomposites

Magnetic nanoparticles were created in or around the sulfonated (s) polystyrene domains in a poly[styrene–b–(ethylene–co–butylene)–b–styrene)] block copolymer (BCP) using an in situ inorganic precipitation procedure. The sBCP was neutralized with a mixed iron/cobalt chloride electrolyte, and the doped samples were converted to their oxides by reaction with sodium hydroxide. Transmission electron microscopy indicated the presence of nanoparticles having diameters of 20–50 nm. Metal oxide particle structures were studied using wide angle X–ray diffraction, which revealed that they were inverse spinel cobalt iron oxide crystals. Thermogravimetric analysis provided the weight percent of the inorganic component and nanocomposite thermal decomposition profile. Modulated differential scanning calorimetry studies suggested that the inorganic inclusions were selectively grown in the polystyrene hard block phase. These nanocomposites were shown, using alternating gradient magnetometry, to be ferrimagnetic at room temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1475–1485, 2005     

β-Na（Y_（1.5-x-y）Na_（0.5））F_6：Yb_xTm_y纳米颗粒的合成及其上转换发光性质

本文采用水热合成法制备了β-Na（Y1.5-x-yNa0.5）F6：YbxTmy（x=0.2~1.0,y=0.001~0.008）纳米颗粒,并利用X射线粉末衍射仪、透射电子显微镜和F-4600荧光分光光度计表征了其样品的物相、形貌和发光性质.结果表明样品物相为六角相,颗粒平均直径约22nm,并探讨了Yb3＋和Tm3＋掺杂浓度对样品的上转换发光性质的影响,结果表明敏化剂Yb3＋的最佳掺杂浓度为60%,而激活剂Tm3＋的最佳掺杂浓度为0.6%.     

Superparamagnetic nanocomposites based on poly(styrene-b-ethylene/butylene-b-styrene)/cobalt ferrite compositions

Magnetic nanoparticles were created in or around the sulfonated (s) polystyrene domains in a phase separated poly[styrene-b-(ethylene-co-butylene)-b-styrene)] block copolymer (BCP) using an in situ inorganic precipitation procedure. The sBCP was neutralized with a mixed iron/cobalt chloride electrolyte and the doped samples were converted to their oxides by reaction with sodium hydroxide and further washing with water. Transmission electron microscopy indicated the presence of nanoparticles in the 5–25 nm size range. The metal oxide particle structures were studied using select area electron diffraction, which revealed that they are of the cobalt iron oxide composition (CoFe₂O₄). These nanocomposites were shown, using a superconducting quantum interference device magnetometer, to be superparamagnetic at 300 K and ferrimagnetic at 5 K. Nanocomposites consisting of smaller particles have a blocking temperature of 70 K, whereas it was 140 K for larger particles.     

Absolutely isolated singularities of a differential equation

In this paper we solve the problemof desingularization of an absolutely isolatedsingularity of a differential equation, including thedicritical case. As an application, we prove thefiniteness of the number of dicritical points in theblowing up tree of an absolutely isolated singularity.     

Decarboxylative Cyclization of Allylic Cyclic Carbamates: Mechanism Studies and Applications to the Synthesis of Natural Products

The mechanism of decarboxylative cyclization of allylic cyclic carbamates 1 leading to 2-substituted △~3-piperidines and-pyrrolidines, as well as its applications to the total synthesis of (--)codonopsine, are described.     

藏药"西藏猫乳"的色谱指纹谱研究

用75%乙醇回流法提取出藏药"西藏猫乳(生等)"的有效成分并浓缩精制后,采用HPLC梯度洗脱法,在选定的色谱条件{DuPont ZORBAX ODS C18色谱柱(4.6 mm×25 cm),用甲醇(A)-甲酸铵水溶液(pH=3.5,1.0 mL·min-1,B)进行梯度洗脱(甲醇浓度0～10 min,20%～25%;10～20 min,25%～40%;20～55 min,40%～55%;55～75 min,55%～75%;75～85 min,75%～90%),检测波长为290 am}下,对藏药"生等"的提取液进行了有效的分离与检测,并建立了"生等"药材的数字化色谱指纹谱(DFPS).所建立的方法能对藏药的产地归属进行有效的分辨.     

Relaxation Limit for Aw-Rascle System

We study the relaxation limit for the Aw-Rascle system of traffic flow. For this we apply the theory of invariant regions and the compensated compactness method to get global existence of Cauchy problem for a particular Aw-Rascle system with source, where the source is the relaxation term, and we show the convergence of this solutions to the equilibrium state.     

Heat generation of aqueously dispersed CoFe2O4 nanoparticles as heating agents for magnetically activated drug delivery and hyperthermia

Self-heating from magnetic nanoparticles under AC magnetic field can be used either for hyperthermia or to trigger the release of an anti-cancer drug, using thermo-responsive polymers. The heat generated by applying an AC magnetic field depends on the properties of magnetic nanoparticles (composition, size, crystal structure) as well as the frequency and amplitude of the magnetic field. Before these systems can be efficiently applied for in vitro or in vivo studies, a thorough analysis of the magnetically induced heating is required. In this study, CoFe₂O₄ nanoparticles were synthesized, dispersed in water, and investigated as heating agents for magnetic thermo-drug delivery and hyperthermia. The temperature profiles and infrared (IR) camera images of heat generation of CoFe₂O₄ nanoparticles under various AC magnetic fields of 127–700 Oe at 195, 231, and 266 kHz were measured using an IR thermacam, excluding the external AC magnetic field interruption. The CoFe₂O₄ nanoparticles were successfully dispersed in water using an 11-mercaptoundecanoic acid ligand exchange method to exchange the solvent used for synthesis of hexane for water. During the heating experiments, each of CoFe₂O₄ nanoparticle solutions reached a steady state where the temperature rose between 0.1 and 42.9 °C above ambient conditions when a magnetic field of 127–634 Oe was applied at 231 or 266 kHz. The heat generation was found to be dependent on the intensity of AC magnetic field and applied frequency. Therefore, the desired heating for magnetically triggered drug delivery or hyperthermia could be achieved in water-dispersed CoFe₂O₄ nanoparticles by adjusting the AC magnetic field and frequency.