Chemically characterised Pimenta dioica (L.) Merr. essential oil as a novel plant based antimicrobial against fungal and aflatoxin B1 contamination of stored maize and its possible mode of action

Abstract

The chemical characterisation of Pimenta dioica essential oil (PDEO) revealed the presence of 50 components, amongst which α-Terpineol (30.31%) was the major component followed by β-Linalool (6.75%) and γ-Terpinene (4.64%). The oil completely inhibited the growth of aflatoxin B₁ secreting strain Aspergillus flavus LHP-VS-8 and aflatoxin B₁ production at 2.5?µL/mL and 1.5?µL/mL, respectively. The oil caused dose dependent reduction of methylglyoxal (an AFB₁ inducer), enhanced leakage of Ca²⁺, Mg²⁺ and K⁺ ions and significantly reduced ergosterol content of fungal plasma membrane. During in situ experiments, PDEO exhibited complete protection of fumigated maize cob slices from fungal infestation without affecting seed germination. The chemically characterised PDEO is recommended as a plant based preservative and shelf life enhancer of food commodities by preventing fungal growth, AFB₁ production and lipid peroxidation. This is the first report on PDEO as inhibitor of AFB₁ secretion and methylglyoxal biosynthesis.     

2-(Phenyltelluromethyl)tetrahydrofuran (L) and 2-(2-{4-methoxyphenyl}telluroethyl)-1,3- dioxolane (L) and their palladium(II) and platinum(II) complexes

The nucleophile [ArTe⁻] generated in situ borohydride solution of Ar₂Te₂, reacts with 2-(chloromethyl) tetrahydrofuran and 2-(2-bromoethyl)-1,3-dioxolane resulting in L¹ and L², respectively. The complexes of palladium(II) and platinum(II) with L¹/L² having stoichiometries [MCl₂·L₂], [ML₂](ClO₄)₂, [(DPPE)ML₂](ClO)₄)₂, [(PPh₃)₂ML₂](ClO₄)₂ and [(phen)ML₂](ClO₄)₂ (where L = L¹/L² DPPE = Ph₂PC H₂CH₂PPh₂, PHEN = 1,10-phenanthroline and M = Pd/Pt) have been synthesized. IR, ¹H, ¹²⁵Te{¹H} and ³¹P{¹H} NMR and UV-vis spectral data of these species in conjunction with their molar conductance and molecular weight data have been used to authenticate the new species. In all complexes (1–20) the ligands L¹ and L² are coordinated through tellurium and in the complexes of formula [ML₂](ClO₄)₂ (M = Pd, Pt) the ligand is bidentate with the oxygen atom used in complexation. In solution, complexes PtCl₂L₂ exist as a mixture of cis and trans isomers whereas only the trans isomer was observed for the palladium analogues. The [(phen)PdL₂](ClO₄)₂(Q) quenches ¹O₂ readily. The plot of log [Q] vs time is linear. Mechanism compatible with the experimental observations is proposed.     

Thiosalicylic acid-immobilized Amberlite XAD-2: metal sorption behaviour and applications in estimation of metal ions by flame atomic absorption spectrometry

Thiosalicylic acid (TSA)-modified Amberlite XAD-2 (AXAD-2) was synthesized by coupling TSA with the support matrix AXAD-2 through an azo spacer. The resulting chelating resin was characterized by elemental analyses, thermogravimetric analysis (TGA) and infrared spectra. The newly designed resin quantitatively sorbs CdII, CoII, CuII, FeIII, NiII and ZnII at pH 3.5-7.0 when the flow rate is maintained between 2 and 4 ml min-1. The HCl or HNO3 (2 mol l-1) instantaneously elutes all the metal ions. The sorption capacity is 197.5, 106.9, 214.0, 66.2, 309.9 and 47.4 mumol g-1 of the resin for cadmium, cobalt, copper, iron, nickel and zinc, respectively, whereas their preconcentration factor is between 180-400. The breakthrough volume of HCl or HNO3 for elution of these metal ions was found to be 4-8 ml. The limit of detection (LOD) for CdII, CoII, CuII, FeIII, NiII and ZnII was 0.48, 0.20, 4.05, 0.98, 1.28 and 3.94 micrograms l-1, respectively, and the limit of quantification (LOQ) was found to be 0.51, 0.29, 4.49, 1.43, 1.58 and 4.46 micrograms l-1, respectively. The loading half time, t1/2, for the cations was found to be less than 2.0 min, except for nickel for which the value was 13.1 min. The determination of each of these six cations is possible in the presence of other five, if their concentration is up to 4 times. All six metals were determined in river water (RSD approximately 0.7-7.7%) and tap water samples (RSD approximately 0.3-5.7%). The estimation of Co was made in the samples of multivitamin tablets (RSD < 2.3%). The results agree with those quoted by manufacturers.     

Mixed Micelles in the Presence of Macrocyclic Additives: A Host–Guest Conductometric Study

The conductances of sodium dodecylsulphate (SDS) + sodium decylsulfate (SDeS) and decyltrimethylammonium bromide (DeTAB) + tetradecyltrimethylammonium bromide (TTAB) over the entire mole fraction range of SDS (_SDS) or DeTAB (_DeTAB) were measured in water, 18-crown-6 ether + water (CR + W) and -cyclodextrin + water (CYC + W) mixtures at fixed 4 mM and 8 mM of CR or CYC in their respective binary mixtures at 30 °C. The conductivity plots for SDS + SDeS mixtures show a single break whereas two breaks are observed at most of the _DeTAB for DeTAB + TTAB mixtures. From the break in the conductivity data, the mixed critical micellar concentration (cmc) and degree of counter-ion association () were computed. The first break corresponds to the classical cmc of TTAB is termed as the first cmc (C₁) and the second break which is observed at concentrations about 4 times the first one, corresponding to the classical cmc of DeTAB and is considered to be the second cmc (C₂). The non-ideality in SDS + SDeS mixtures has been evaluated by using the regular solution theory and it has been observed that the mixture is close to ideal in the absence and presence of additives. The variation in C₁, C₂ and ₁, ₂ for DeTAB + TTAB has been discussed in terms of the mixed micelle formation which are predominantly rich in the TTAB and DeTAB monomers respectively.     

A polystyrene based membrane electrode for cadmium(II) ions

A polystyrene based membrane of 3,4:12,13-dibenzo-2,5,11,14-tetraoxo- 1,6,10,15-tetraazacyclooctade-cane shows a Nernstian response to Cd(II) ions over a wide concentration range (3.16 x 10(-6) - 1.00 x 10(-1) mol L(-1) with a Nernstian slope of 29.8 mV/decade of concentration, between pH 2.0 and 6.0. This electrode has been found to be chemically inert and of adequate stability with a response time of 20s. The electrode gives reproducible results with a lifetime of 130 days. The membrane works satisfactorily in a partially non-aqueous medium up to a maximum 35% (v/v) content of methanol and ethanol. The practical utility of the proposed chemical sensor has been observed by using it as end-point indicator in the titration of Cd(II) ions with EDTA. The potentiometric selectivity coefficient values indicate that the membrane sensor is highly selective for Cd(II) ions over a number of cations. Small amounts of surfactants do not disturb the functioning of the sensor. This electrode has also been used to estimate cadmium ions in real samples.