Dispersing nanotubes with surfactants: a microscopic statistical mechanical analysis

A first theoretical study of surfactant-stabilized carbon nanotube dispersions is presented. Density functional theory is used to compute potential of mean force between nanotubes in an aqueous solution of cationic surfactant n-decyltrimethylammonium chloride. In agreement with experimental results, it is found that stable dispersions can be prepared for surfactant bulk concentrations below the critical micelle concentration. Computed density profiles of head and tail segments indicate that surfactants adsorb on nanotube surfaces in a random fashion rather than form cylindrical micelles, which is also in agreement with recent small-angle neutron scattering measurements.     

Microdeformation behavior in nanotemplated epoxy thermosets: A study with in situ tensile deformation technique in transmission electron microscopy

Microdeformation behavior in nanostructured block copolymer‐toughened epoxy resins, or templated epoxy thermosets, was studied using an in situ tensile deformation technique performed directly in a transmission electron microscope. The observed microdeformation modes were found to correlate well with the macroscopic mechanical properties of the materials. In the order of decreasing macroscopic fracture toughness, the microdeformation modes were observed to change from large uniform plastic deformation over an extensive area, to localized plastic deformation bands, to little plastic deformation observed in the most brittle material. A similar trend was also observed when samples of the same material were tested at different temperatures, reflecting changes in the deformation mechanism as a function of temperature. Structural defects were observed in nanotoughening phases when plastic deformation was observed. The implication of the observed microdeformation modes to the macroscopic toughening mechanisms is discussed in the context of the micromorphology of the nanometer sized toughening phases and parameters of the epoxy matrix chemistry such as bromination, molecular weight, and interfacial miscibility. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 393–406, 2009     

Sulfonation of metallocene‐based polyolefinic elastomers and its influence on physicomechanical properties: Effect of reaction parameters,styrene grafting,and pendant chain length

Direct sulfonation and styrene‐mediated sulfonation were carried out onto metallocene‐based poly(ethylene‐co‐octene) (POE) and poly(ethylene‐co‐butene) (PBE) elastomers to impart polarity on the completely nonpolar rubbery matrices and to prepare a new class of elastomer. The influence of styrene‐grafting and pendant chain length on the degree of sulfonation was also studied. The effects of sulfonation, styrene grafting and styrene‐mediated sulfonation at their optimized levels on various physicomechanical properties were thoroughly investigated, and the resultant properties were correlated with structures of the modified elastomers. Higher extent of sulfonic acid groups were introduced through direct sulfonation in comparison with the styrene‐mediated sulfonation, whereas better thermal and mechanical properties were obtained through styrene‐mediated sulfonation in comparison with the direct sulfonation process. PBE had shown higher degree of sulfonation and percentage grafting than POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8023–8040, 2008     

Copper catalyzed atom transfer radical copolymerization of glycidyl methacrylate and 2‐ethylhexyl acrylate

This investigation reports the atom transfer radical copolymerization (ATRcP) of glycidyl methacrylate (GMA) and 2‐ethylhexyl acrylate (EHA). Poly(glycidyl methacrylate) (PGMA) has easily transformable pendant oxirane group and poly(2‐ethylhexyl acrylate) (PEHA) has very low T_g. They are the important components of coating and adhesive materials. Copolymerization of GMA and EHA was carried out in bulk and in toluene at 70 °C at different molar feed ratios using CuCl as catalyst in combination with 2,2′‐bypyridine (bpy) as well as N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. The molecular weight (M_n) and the polydispersity index (PDI) of the polymers were determined by GPC analysis. The molar composition of the copolymers was determined by ¹H NMR analysis. The reactivity ratios of GMA (r₁) and EHA (r₂) were determined using Finemann‐Ross and Kelen‐Tudos linearization methods and those had been compared with the literature values for conventional free radical copolymerization. The thermal properties of the copolymers were studied by DSC and TGA analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6526–6533, 2009     

The effects of monophenol chain terminators on the structure–property relationships of controlled epoxy networks

Five families of new controlled epoxy thermosets (CENs) using three monophenol chain terminators were prepared to study systematic changes in the structure and amount of the monophenol and the initial molecular weight between crosslinks (M_c,i) on the properties of epoxy thermosets. Glass transition temperature (T_g) decreases with monophenol mole fraction (χ) in proportion to both the concentration and flexibility of the chain terminator. Distinct serial relations for T_g depression were observed for the three M_c,i families. Dynamic mechanical analysis (DMA) shows significant perturbations of the relaxation behavior with added terminator as evidenced by decrease in peak tan δ and in post T_g damping. The rubbery coefficients of thermal expansion (CTE) increases with monophenol concentration only at χ > 0.05 and shows distinct curvature versus temperature, but is largely invariant with monophenol flexibility. The thermal stability of terminated CENs decreases only slightly with χ and little difference was found with monophenol structure. Most surprisingly, fracture toughness decreases markedly and discontinuously with χ depending on M_c,i. The values of the critical monophenol concentration at which fracture toughness markedly decreases (χ_c) are inversely proportional to M_c,i but are independent of monophenol flexibility. No correlation of χ_c with any of the calculated network structure parameters was apparent. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1632–1640, 2008     

Synthesis of carbohydrate-conjugated nanoparticles and quantum dots

Nanoparticle-based probes are emerging as alternatives to molecular probes due to their various advantages, such as bright and tunable optical property, enhanced chemical and photochemical stability, and ease of introduction of multifunctionality. This work presents a simple and general approach for functionalizing various nanoparticle systems for use as glycobiological probes. Silica-coated nanoparticles of Ag, Fe3O4, and ZnS-CdSe were synthesized and functionalized with dextran. The resulting 10-40-nm-sized particles were robust, water-soluble, colloidally stable, and biochemically active.     

Electronic and infrared spectroscopy of jet-cooled (+/-)-cis-1-amino-indan-2-ol hydrates

The role of conformational isomerism in molecular interaction has been studied using the example of jet-cooled complexes of (+/-)-cis-1-amino-indan-2-ol with water. The two formerly evidenced conformers of (+/-)-cis-1-amino-indan-2-ol easily form hydrates and dihydrates, which have been studied by means of laser-induced fluorescence and IR/UV double resonance spectroscopy, as well as ab initio calculations. All the 1 : 1 and 1 : 2 complexes with water evidenced in this work involve "ring" structures, in which the water monomer or dimer acts as an acceptor from the NH(2) and a donor to the OH groups of (+/-)-cis-1-amino-indan-2-ol. However, the water lies externally to the indan frame in the hydrates of conformer I of (+/-)-cis-1-amino-indan-2-ol, which possesses axial NH(2) and equatorial OH groups, and above it for the hydrates with the less stable conformer II, with equatorial NH(2) and axial OH groups. Consequently, the different steric constraints which exist in the two conformers result in different hydrogen bond topologies, with an additional OH[dot dot dot]pi interaction for the hydrates of conformer II.     

Wetting and electrowetting properties of carbon nanotube templated parylene films

In this study, we compared the wetting and electrowetting properties of a planar parylene (poly(p-xylylene)) film to those of a nanostructured parylene film. To generate the nanostructured film, we used an aligned array of multiwalled carbon nanotubes as a template; a thin coating of parylene was deposited on the nanotube template to generate a parylene film with a nanoscale roughness structure. Static contact angle measurements indicated a very significant increase in the water contact angle from approximately 73 degrees for planar parylene to approximately 110 degrees for the nanotemplated parylene. In addition, we performed electrowetting experiments to dynamically tune the contact angle by application of electric potential. Interestingly, the flat parylene film showed contact angle saturation at an applied voltage of approximately 40 V, while the nanotemplated parylene film did not experience saturation in the contact angle response even for voltages up to 80 V. These results show that engineering a nanoscale roughness structure to a polymer film results in significant changes to the wetting and electrowetting properties of the polymer.