Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

Perchloric Acid-Catalyzed Synthesis of 9-Aryl Xanthenes-9H-3,6-diol and 1,3,6,8-Tetraol in Water

Efficient syntheses of xanthenes have been described using a catalytic amount of perchloric acid in water. The high temperature and lengthy reaction time normally required for formation of xanthenes derivatives are not necessary when using a catalytic amount of perchloric acid. The method is relatively inexpensive, easily available, nonvolatile, nonexplosive, and thermally robust to catalyze the reaction at 80 °C by simple heating with good to excellent yields. The advantages of the reaction involve simple reaction protocol, simple workup, and improved synthesis in the presence of perchloric acid as catalyst.     

Preparation of 4,5 disubstituted-2H-1,2,3-triazoles from (Z)-2,3-diaryl substituted acrylonitriles

2H-1,2,3-Triazoles (2) were synthesized by [3+2] cycloaddition of (Z)-2,3-diaryl substituted acrylonitriles (1) with sodium azide and ammonium chloride in DMF/water. This method represents a facile and efficient reaction procedure for the synthesis of 4,5-diaryl-2H-1,2,3-triazoles in modest to good yields.     

l-Proline catalyzed one-step synthesis of 4,5-diaryl-2H-1,2,3-triazoles from heteroaryl cyanostilbenes via [3+2]cycloaddition of azide

Use of a novel reagent has been established for the synthesis of a series of 4,5-diaryl-2H-1,2,3-triazoles (6a–i and 9a–e) from cyanostilbene analogs of benzo[b]thiophene, benzo[b]furan, and indole, catalyzed by l-proline via Lewis base-catalyzed one-step [3+2]cycloaddition of azide. This method provides an efficient, simple, and environmentally benign procedure that affords good yields and relatively short reaction times.     

Importance of cytochromes in cyclization reactions: Quantum chemical study on a model reaction of proguanil to cycloguanil

Proguanil, an anti‐malarial prodrug, undergoes cytochrome P450 catalyzed biotransformation to the pharmacologically active triazine metabolite (cycloguanil), which inhibits plasmodial dihydrofolate reductase. This cyclization is catalyzed by CYP2C19 and many anti‐malarial lead compounds are being designed and synthesized to exploit this pathway. Quantum chemical calculations were performed using the model species (Cpd I for active species of cytochrome and N4‐isopropyl‐N6‐methylbiguanide for proguanil) to elucidate the mechanism of the cyclization pathway. The overall reaction involves the loss of a water molecule, and is exothermic by approximately 55 kcal/mol, and involves a barrier of approximately 17 kcal/mol. The plausible reaction pathway involves the initial H‐radical abstraction from the isopropyl group by Cpd I, followed by two alternative paths‐ (i) oxygen rebound to provide hydroxyl derivative and (ii) loss of additional H‐radical to yield 1,3,5‐triazatriene, which undergoes cyclization. This study helped in understanding the role of the active species of cytochromes in this important cyclization reaction. © 2014 Wiley Periodicals, Inc.     

Chimera Spectrum Diagnostics for Peptides Using Two-Dimensional Partial Covariance Mass Spectrometry

The rate of successful identification of peptide sequences by tandem mass spectrometry (MS/MS) is adversely affected by the common occurrence of co-isolation and co-fragmentation of two or more isobaric or isomeric parent ions. This results in so-called `chimera spectra’, which feature peaks of the fragment ions from more than a single precursor ion. The totality of the fragment ion peaks in chimera spectra cannot be assigned to a single peptide sequence, which contradicts a fundamental assumption of the standard automated MS/MS spectra analysis tools, such as protein database search engines. This calls for a diagnostic method able to identify chimera spectra to single out the cases where this assumption is not valid. Here, we demonstrate that, within the recently developed two-dimensional partial covariance mass spectrometry (2D-PC-MS), it is possible to reliably identify chimera spectra directly from the two-dimensional fragment ion spectrum, irrespective of whether the co-isolated peptide ions are isobaric up to a finite mass accuracy or isomeric. We introduce ‘3-57 chimera tag’ technique for chimera spectrum diagnostics based on 2D-PC-MS and perform numerical simulations to examine its efficiency. We experimentally demonstrate the detection of a mixture of two isomeric parent ions, even under conditions when one isomeric peptide is at one five-hundredth of the molar concentration of the second isomer.     

Simultaneous quantitation of rosuvastatin and gemfibrozil in human plasma by high-performance liquid chromatography and its application to a pharmacokinetic study

A simple, sensitive and specific high-performance liquid chromatography method is described for simultaneous determination of rosuvastatin (RST) and gemfibrozil (GFZ) in human plasma using celecoxib as an internal standard (IS). The assay procedure involved extraction of RST, GFZ and IS from plasma into acetonitrile. Following separation and evaporation of the organic layer the residue was reconstituted in the mobile phase and injected onto an X-Terra C(18) column (4.6 x 150 mm, 5.0 microm). The chromatographic run time was less than 20 min using flow gradient (0.0-1.60 mL/min) with a mobile phase consisting of 0.01 M ammonium acetate:acetonitrile:methanol (50:40:10, v/v/v) and UV detection at 275 nm. Nominal retention times of RST, GFZ and IS were 6.7, 13.9 and 16.4 min, respectively. Absolute recovery of both analytes and IS was greater than 90%. The lower limit of quantification (LLOQ) of RST and GFZ was 0.03 and 0.30 microg/mL, respectively. Linearity was excellent (r(2) = 0.999) in the 0.03-10 microg/mL and 0.3-100 microg/mL ranges for RST and GFZ, respectively. The inter- and intra-day precisions in the measurement of RST quality control (QC) samples 0.03, 0.09, 2.50 and 8.00 microg/mL were in the range 2.37-9.78% relative standard deviation (RSD) and 0.92-10.08% RSD, respectively. Similarly, the inter- and intra-day precisions in the measurement of GFZ quality control (QC) samples 0.30, 0.90, 25.0 and 80.0 microg/mL were in the ranges 2.79-6.27 and 0.96-9.69% RSD, respectively. Accuracies in the measurement of QC samples for RST and GFZ were in the range 85.43-107.23 and 84.98-102.35% respectively, of the nominal values. RST and GFZ were stable in the array of stability studies viz., bench-top, auto-sampler and freeze-thaw cycles. Stability of RST and GFZ was established for 1 month at -80C. The application of the assay in an oral pharmacokinetic study in rats co-administered with RST and GFZ is described.     

Microdeformation behavior in nanotemplated epoxy thermosets: A study with in situ tensile deformation technique in transmission electron microscopy

Microdeformation behavior in nanostructured block copolymer‐toughened epoxy resins, or templated epoxy thermosets, was studied using an in situ tensile deformation technique performed directly in a transmission electron microscope. The observed microdeformation modes were found to correlate well with the macroscopic mechanical properties of the materials. In the order of decreasing macroscopic fracture toughness, the microdeformation modes were observed to change from large uniform plastic deformation over an extensive area, to localized plastic deformation bands, to little plastic deformation observed in the most brittle material. A similar trend was also observed when samples of the same material were tested at different temperatures, reflecting changes in the deformation mechanism as a function of temperature. Structural defects were observed in nanotoughening phases when plastic deformation was observed. The implication of the observed microdeformation modes to the macroscopic toughening mechanisms is discussed in the context of the micromorphology of the nanometer sized toughening phases and parameters of the epoxy matrix chemistry such as bromination, molecular weight, and interfacial miscibility. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 393–406, 2009