静电纺丝制备YVO4:Sm3+纳米纤维及其荧光光谱性能

采用静电纺丝技术与高温煅烧工艺相结合,以氧化钐、氧化钇、偏钒酸铵和聚丙烯腈为主要原料,制备稀土离子掺杂的YVO4:Sm3+纳米纤维。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、傅立叶变换红外(FT-IR)、热重-差热(TG-DTA)和荧光光谱(PL)等分析测试手段对所得样品的结构、形貌和荧光光谱性能进行表征。研究结果表明:静电纺丝制备的有机-无机复合纤维的直径在200~250 nm之间,经过900℃热处理后,所得YVO4:Sm3+样品纤维状结构保持完好,直径减至100 nm。掺杂的稀土Sm3+离子在YVO4纤维中显示出特征发射,同时VO3-4和稀土Sm3+离子之间存在能量传递;Sm3+的掺杂浓度为2%(摩尔分数)时发光强度最大。     

陕南茶叶稀土元素产地特征研究

为了掌握陕南茶叶中稀土元素含量和分布状况,并利用稀土元素对茶叶产地进行判别,采用ICP-MS法对陕南地区44个茶叶样品中16种稀土元素进行了测定。结果表明:茶叶中不同稀土元素含量差异较大,其中La,Ce,Nd含量较高,平均含量分别为124.81,172.13,87.20μg·kg-1;茶叶样品中稀土氧化物含量范围为200.32~1558.35μg·kg-1,总体上呈东高西低趋势,且均低于国家规定限量;茶叶中稀土元素随地域变化表现出不同分布特征,但具有相似的丰度模式;利用主成分分析将茶叶稀土元素归结为轻稀土组和重稀土组,间接地证明轻稀土元素和重稀土元素在从土壤到茶叶迁移过程中仍存在着差异;聚类分析结果表明,稀土元素可作为陕南茶叶产地判别的重要指标。     

A Supercharged Fluorescent Protein as a Versatile Probe for Homogeneous DNA Detection and Methylation Analysis

Supercharged proteins are a new class of functional proteins with exceptional stability and potent ability to deliver bio‐macromolecules into cells. As a proof‐of‐principle, a novel application of supercharged proteins as a versatile biosensing platform for nucleic acid detection and epigenetics analysis is presented. Taking supercharged green fluorescent protein (ScGFP) as the signal reporter, a simple turn‐on homogenous method for DNA detection has been developed based on the polyionic nanoscale complex of ScGFP/DNA and toehold strand displacement. This assay shows high sensitivity and potent ability to detect single‐base mismatch. Furthermore, combined with bisulfite conversion, this ScGFP‐based assay was further applied to analyze site‐specific DNA methylation status of genomic DNA extracted from real human colon carcinoma tissue sample with ultrahigh sensitivity (4 amol methylated DNA).     

Intrinsic Peroxidase‐like Activity of Porous CuO Micro‐/nanostructures with Clean Surface

Porous CuO micro‐/nanostructures with clean surface, prepared through Cu₂(OH)₂CO₃ precursor followed by calcination in air, were proven to be an effective peroxidase mimic. They can quickly catalyze oxidation of the peroxidase substrate 3,3′,5,5′‐tetramethylbenzidine (TMB) in the presence of H₂O₂, producing a blue color. The obtained porous CuO micro‐/nanostructure have potential application in wastewater treatment. The apparent steady‐state kinetic parameter was studied with TMB as the substrate. In addition, the potential application of the porous CuO in wastewater treatment was demonstrated with phenol‐containing water as an example. Such investigation not only confirms the intrinsic peroxidase‐like activity of micro‐/nanostructured CuO, but also suggests its potential application in wastewater treatment.     

Preparation and characterization of Ti0.7Sn0.3O2 as catalyst support for oxygen reduction reaction

Sn-doped TiO_2 nanoparticles with high surface area of 125.7 m~2·g~(-1) are synthesized via a simple one-step hydrothermai method and explored as the cathode catalyst support for proton exchange membrane fuel cells.The synthesized support materials are studied by X-ray diffraction analysis,energy dispersive X-ray spectroscopy and transmission electron microscopy.It is found that the conductivity has been greatly improved by the addition of 30 mol%Sn and Pt nanoparticles are well dispersed on Ti_(0.7)Sn_(0.3)O_2 support with an average size of 2.44 run.Electrochemical studies show that the Ti_(0.7)Sn_(0.3)O_2 nanoparticles have excellent electrochemical stability under a high potential compared to Vulcan XC-72.The as-synthesized Pt/Ti_(0.7)Sn_(0.3)O_2 exhibits high and stable electrocatalytic activity for the oxygen reduction reaction.The Pt/Ti_(0.7)Sn_(0.3)O_2 catalyst reserves most of its electrochemically active surface area(ECA),and its half wave potential difference is 11 mV,which is lower than that of Pt/XC-72(36 mV) under 10 h potential hold at 1.4 V vs.NHE.In addition,the ECA degradation of Pt/Ti_(0.7)Sn_(0.3)O_2is 1.9 times lower than commercial Pt/XC-72 under 500 potential cycles between 0.6 V and 1.2 V vs.NHE.Therefore,the as synthesized Pt/Ti_(0.7)Sn_(0.3)O_2 can be considered as a promising alternative cathode,catalyst for proton exchange membrane fuel cells.     

微波法制备还原氧化石墨烯负载Pt_3Co纳米合金(英文)

微波辐射法可以在数分钟内将高度分散的Pt3Co合金颗粒负载于还原氧化石墨烯表面上.表征结果发现,与传统的溶剂热法和浸渍法相比,微波法制备的催化剂中贵金属的利用率高,合金颗粒的分布均匀,组成可控,同时氧化石墨烯的再石墨化现象也得到有效地抑制.采用微波法制备的Pt3Co/RGO-MW催化剂在肉桂醛加氢反应中具有较高的活性和和产物选择性.Pt3Co/RGO-MW中每一个Pt原子在70℃的转化频率高达23.8 min-1.     

分子氧为氧化剂磷钒酸盐为催化剂超深度氧化脱除柴油中的二苯并噻吩

一种“双帽Keggin型”磷钒酸盐在温和的反应条件下以分子氧为氧化剂氧化二苯并噻吩至二苯并噻吩砜的反应中表现出很高的催化活性. 用溶剂萃取或者选择吸附等方法可轻易地将反应产生的二苯并噻吩砜从油品中除去. 这提供了一种新型的分子氧为氧化剂的超深度氧化脱硫方法.     

酸性金属氧化物对锰铈氧化物催化剂脱硝温度窗口的调控作用

利用溶胶-凝胶法,采用三种酸性金属氧化物（氧化铌、氧化钨和氧化钼）对锰铈复合氧化物催化剂进行了改性. 测试了催化剂的氮氧化物选择性催化还原（SCR）活性,以筛选对应不同温度窗口的合适酸性氧化物改性剂. 同时评价了催化剂的NO氧化和NH₃氧化活性. 利用X射线衍射、BET比表面积测试、H₂程序升温还原、NH₃/NO_x程序升温脱附和NH₃/NO_x吸附红外光谱等手段对催化剂进行了表征. MnO_x-CeO₂催化剂表现出良好的低温（100-150 ℃）活性. 酸性金属氧化物的添加削弱了催化剂的氧化还原特性,从而抑制了NH₃的活化和NO₂辅助的快速SCR反应. 与此同时,相对高温（250-350 ℃）区NH₃的氧化也受到了抑制,B酸和L酸上的NH₃吸附得以增强. 因此,催化剂的SCR脱硝温度窗口向高温移动,改性效果Nb₂O₅ < WO₃ < MoO₃.     

How polydispersity of network polymers influences strain-induced crystal nucleation in a rubber

Network polymers in a rubber or a gel often contain non-uniform chain lengths. By means of dynamic Monte Carlo simulations of polymer mixtures with various compositions of two chain lengths, we investigated how the factor of polydispersity influences their strain-induced crystal nucleation. Under a high temperature and a high strain rate, the stretching of both polymers revealed that crystal nucleation is mainly accelerated by the presence of short-chain polymers; nevertheless, both polymers join together in the nucleation process. Further analysis proved that crystal nucleation is initiated from those highly stretched short segments, which are rich on the short-chain polymers.     

Electroactive shape memory effect of radiation cross-linked SBS/LLDPE composites filled with carbon black

The poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymer and linear low-density polyethylene (LLDPE) were blended and irradiated by γ rays to prepare shape memory polymer (SMP). Different weight fractions of conductive carbon black (CB) were filled into SMP to form a novel electroactive shape memory CB/SBS/LLDPE composite. The CB reinforced radiation cross-linked SBS/LLDPE blends for the improvement of the mechanical weakness and conductivity of SBS/LLDPE bulk and for wide practical engineering uses. The electroactive shape memory CB/SBS/LLDPE composites were investigated by electrical properties, mechanical, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and electroactive shape memory effects. It is found that the tensile strength, storage modulus, and resistance against mechanical and thermal mechanical cycle loading in the developed composites increased due to the role of reinforcement of CB. The melting temperatures and volume resistance of the composites decreased with the increment of CB for excellent electrical conductivity of CB. The electroactive shape memory effects of developed CB/SBS/LLDPE composites were affected by CB weight fractions and applied voltage, while good shape recovery could be obtained in the shape recovery test. When the CB fraction is more than 5 wt%, full recovery can be observed after tens of seconds and shape recovery speed increased with CB fractions and voltage increasing. However, the shape recovery rate decreases slightly with increment of cycle times.