Synthesis of 2- and 2,7-functionalized pyrene derivatives: an application of selective C-H borylation

An efficient synthetic route to 2- and 2,7-substituted pyrenes is described. The regiospecific direct C-H borylation of pyrene with an iridium-based catalyst, prepared in situ by the reaction of [{Ir(μ-OMe)cod}(2)] (cod = 1,5-cyclooctadiene) with 4,4'-di-tert-butyl-2,2'-bipyridine, gives 2,7-bis(Bpin)pyrene (1) and 2-(Bpin)pyrene (2, pin = OCMe(2)CMe(2)O). From 1, by simple derivatization strategies, we synthesized 2,7-bis(R)-pyrenes with R = BF(3)K (3), Br (4), OH (5), B(OH)(2) (6), and OTf (7). Using these nominally nucleophilic and electrophilic derivatives as coupling partners in Suzuki-Miyaura, Sonogashira, and Buchwald-Hartwig cross-coupling reactions, we obtained 2,7-bis(R)-pyrenes with R = (4-CO(2)C(8)H(17))C(6)H(4) (8), Ph (9), C≡CPh (10), C≡C[{4-B(Mes)(2)}C(6)H(4)] (11), C≡CTMS (12), C≡C[(4-NMe(2))C(6)H(4)] (14), C≡CH (15), N(Ph)[(4-OMe)C(6)H(4)] (16), and R = OTf, R' = C≡CTMS (13). Lithiation of 4, followed by reaction with CO(2), yielded pyrene-2,7-dicarboxylic acid (17), whilst borylation of 2-tBu-pyrene gave 2-tBu-7-Bpin-pyrene (18) selectively. By similar routes (including Negishi cross-coupling reactions), monosubstituted 2-R-pyrenes with R = BF(3)K (19), Br (20), OH (21), B(OH)(2) (22), [4-B(Mes)(2)]C(6)H(4) (23), B(Mes)(2) (24), OTf (25), C≡CPh (26), C≡CTMS (27), (4-CO(2)Me)C(6)H(4) (28), C≡CH (29), C(3)H(6)CO(2)Me (30), OC(3)H(6)CO(2)Me (31), C(3)H(6)CO(2)H (32), OC(3)H(6)CO(2)H (33), and O(CH(2))(12)Br (34) were obtained from 2. These derivatives are of synthetic and photophysical interest because they contain donor, acceptor, and conjugated substituents. The crystal structures of compounds 4, 5, 7, 12, 18, 19, 21, 23, 26, and 28-31 have also been obtained from single-crystal X-ray diffraction data, revealing a diversity of packing modes, which are described in the Supporting Information. A detailed discussion of the structures of 1 and 2, their polymorphs, solvates, and co-crystals is reported separately.     

Multiple response optimization for Cu, Fe and Pb determination in naphtha by graphite furnace atomic absorption spectrometry with sample injection as detergent emulsion

The present paper reports the optimization for Cu, Fe and Pb determination in naphtha by graphite furnace atomic absorption spectrometry (GF AAS) employing a strategy based on the injection of the samples as detergent emulsions. The method was optimized in relation to the experimental conditions for the emulsion formation and taking into account that the three analytes (Cu, Fe and Pb) should be measured in the same emulsion. The optimization was performed in a multivariate way by employing a three-variable Doehlert design and a multiple response strategy. For this purpose, the individual responses of the three analytes were combined, yielding a global response that was employed as a dependent variable. The three factors related to the optimization process were: the concentration of HNO₃, the concentration of the emulsifier agent (Triton X-100 or Triton X-114) in aqueous solution used to emulsify the sample and the volume of solution. At optimum conditions, it was possible to obtain satisfactory results with an emulsion formed by mixing 4 mL of the samples with 1 mL of a 4.7% w/v Triton X-100 solution prepared in 10% v/v HNO₃ medium. The resulting emulsion was stable for 250 min, at least, and provided enough sensitivity to determine the three analytes in the five samples tested. A recovery test was performed to evaluate the accuracy of the optimized procedure and recovery rates, in the range of 88-105%; 94-118% and 95-120%, were verified for Cu, Fe and Pb, respectively.     

Discrimination of Isomers of Released <Emphasis Type="Italic">N-</Emphasis> and <Emphasis Type="Italic">O-</Emphasis>Glycans Using Diagnostic Product Ions in Negative Ion PGC-LC-ESI-MS/MS

Profiling cellular protein glycosylation is challenging due to the presence of highly similar glycan structures that play diverse roles in cellular physiology. As the anomericity and the exact linkage type of a single glycosidic bond can influence glycan function, there is a demand for improved and automated methods to confirm detailed structural features and to discriminate between structurally similar isomers, overcoming a significant bottleneck in the analysis of data generated by glycomics experiments. We used porous graphitized carbon-LC-ESI-MS/MS to separate and detect released N- and O-glycan isomers from mammalian model glycoproteins using negative mode resonance activation CID-MS/MS. By interrogating similar fragment spectra from closely related glycan isomers that differ only in arm position and sialyl linkage, product fragment ions for discrimination between these features were discovered. Using the Skyline software, at least two diagnostic fragment ions of high specificity were validated for automated discrimination of sialylation and arm position in N-glycan structures, and sialylation in O-glycan structures, complementing existing structural diagnostic ions. These diagnostic ions were shown to be useful for isomer discrimination using both linear and 3D ion trap mass spectrometers when analyzing complex glycan mixtures from cell lysates. Skyline was found to serve as a useful tool for automated assessment of glycan isomer discrimination. This platform-independent workflow can potentially be extended to automate the characterization and quantitation of other challenging glycan isomers.

Open image in new window

Graphical Abstract ?

     

Insecticidal activity against Bemisia tabaci biotype B of peel essential oil of Citrus sinensis var. pear and Citrus aurantium cultivated in northeast Brazil

The fumigant action of peel essential oils of Citrus sinensis var. pear (pear orange = PO) and C. aurantium (bitter orange = BO) from the northeast of Brazil were evaluated against Bemisia tabaci biotype B and compared with eugenol as a positive control. The oil concentration in the PO at 8.5 microL/L of air caused 97% mortality, while the oil concentration of BO at 9.5 microL/L of air caused 99% mortality. However, the LC50 estimates for both oils (LC50 = 3.80 microL/L of air for PO and LC50 = 5.80 microL/L of air for BO) did not differ from each other, but they did when compared with eugenol (LC50 = 0.20 microL/L of air). Regarding their effects on oviposition, the Citrus oils showed concentration-response dependence, reducing the number of eggs as the concentration increased, which was not observed for eugenol. The minimum concentrations of the oils that caused a significant reduction in the egg lay were 3.5 and 7.0 microL/L of air for BO and PO, respectively. These results suggest that oils from PO and BO peels may be promising as models to develop new insecticides that might be applied into the integrated management of whiteflies.     

Ditopic Calixcrowns with Inequivalent Crown Loops: Synthesis and Structural Characterisation of an Unsymmetrical Calix[4]arene biscrown-6

Consecutive base-catalysed reactions of calix[4]arene with the ditosylates of two different polyetherdiols result in the relatively efficient production of an unsymmetrical calix biscrown-6 which, after reduction of an ethoxycarbonyl substituent to an hydroxymethyl group, has been characterised structurally by a room-temperature, single crystal X-ray study of its chloroform solvate. Crystals of ( 4), C53H62O13... 0.57CHCl3, are triclinic, P¯1, a 18.95(3), b 12.394(9), c 11.756(7) Å 106.93(5), 101.77(8), 94.63(8)°, Z = 2; R was 0.088 for 2231 observed' (I > 3(I)) diffractometer data.     

Donor-substituted cyanoethynylethenes: powerful chromophores for opto-electronic applications

Donor-substituted cyanoethynylethenes (CEEs) were synthesised, structurally characterised and investigated for their electronic and two-photon absorption properties, revealing exceptionally strong intramolecular charge-transfer interactions.     

Negative ion graphitised carbon nano-liquid chromatography/mass spectrometry increases sensitivity for glycoprotein oligosaccharide analysis

Negative ion nano-liquid chromatography/mass spectrometry (nano-LC/MS) and tandem mass spectrometry (nano-LC/MS(2)), using graphitised carbon as separating medium, were explored for analysing neutral and acidic O-linked and N-linked oligosaccharide alditols. Compared to the sensitivity of capillary LC/MS (flow rate of 6 microL/min) coupled with a conventional electrospray ionisation source, the nano-LC/MS (flow rate of 0.6 microL/min) with a nanoflow ion source was shown to increase the sensitivity ten-fold with a detection limit in the low-femtomole range. The absolute signals for the [M-nH](n-) ions of the oligosaccharides were increased 100-fold, enabling accumulation of high-quality fragmentation data in MS(2) mode, in which detection of low abundant sequence ions is necessary for characterisation of highly sialylated N-linked oligosaccharides. Oligosaccharides with high numbers of sialic acid residues gave dominant fragments arising from the loss of sialic acid, and less abundant fragments from cleavage of other glycosidic bonds. Enzymatic off-line desialylation of oligosaccharides in the low-femtomole range prior to MS(2) analysis was shown to increase the quality of the spectra. Automated glycofragment mass fingerprinting using the GlycosidIQ software confirmed the oligosaccharide sequence for both neutral desialylated as well as sialylated structures. Furthermore, the use of graphitised carbon nano-LC/MS enabled the detection of four sialylated O-linked oligosaccharides on membrane proteins from ovarian tissue (5 microg of total amount of protein).     

Improvement of Shack-Hartmann wave-front sensor measurement for extreme adaptive optics

The development of high-performance adaptive optics systems requires the optimization of wave-front sensors (WFSs) working in the high-order correction regime. We propose a new method to improve the wave-front slope estimation of a Shack-Hartmann WFS in such a regime. Based on a detailed analysis of the different errors in the slope estimation with a classical centroid and with the new method, the gain in terms of wave-front-sensing accuracy in both the detector and the photon noise regimes is stressed. This improvement is proposed without major system disruption.