Facile isolation of bisimines based on 3,3'-diaminobenzidine: direct access to unsymmetrical bimetallic salphen building blocks

Diimines obtained from 3,3'-diaminobenzidine and tert-butyl-substituted salicylaldehydes in MeOH can be readily isolated in 60-90% yield and were obtained as a mixture of geometrical isomers. Two distinct diimine intermediates (4 and 5) with a higher molecular symmetry as related to the other isomeric diimine products were both isolated by crystallization of which 5 was subsequently used to demonstrate that nonsymmetrical bis-salphen complexes with different functional groups and metal centers can be assembled via a three-component one-pot procedure.     

Evidence for PSII donor-side damage and photoinhibition induced by cadmium treatment on rice (Oryza sativa L.)

The effects of cadmium (from 7.5 to 75 microM) on chloroplasts of rice were studied at the structural and biochemical level. Loss of pigments, reduction of thylakoids and decrease in oxygen evolution and Fv/Fm ratio occur in leaves following cadmium treatment. However, the amount of photosystem II reaction center proteins and that of its light harvesting complex is not affected, indicating that cadmium does not adversely influence the structural organization of this photosystem. In thylakoids isolated from cadmium-treated plants a loss in the capability to reduce 2,6-dichlorophenolindophenol is observed, which is partially restored if diphenylcarbazide is used as an electron donor, indicating that cadmium affects water splitting activity. In thylakoids isolated from control plants and treated with cadmium, diphenylcarbazide preserves most of the photosystem II activity lost after incubation with cadmium; most of the S(2) multiline electron paramagnetic resonance signal from the manganese cluster is lost, whereas the TyrD(+) and other signals are retained. Light-induced photosystem II damage, in vitro, is promoted by Cd-treatment as deduced from the mobility shift of the D1 protein observed by immunoblot.     

A new reverse mode light shutter from silica-dispersed liquid crystals

Nanoparticle dispersions in liquid crystalline materials at low concentrations allow both investigating the formation of defects in liquid crystal (LC) and enhancing the light-scattering properties of LC optical devices. Reverse mode LC dispersions are LC devices, which look like transparent in their OFF state, when no electric field is applied, and opaque in their ON state. In this paper, a new reverse mode device, formed by a dispersion of a LC mixture in a silica nanoparticle crosslinked network, is presented. The morphology and the electro-optical properties of these silica nanoparticle/LC composites were investigated for two different LC mixtures with a negative dielectric anisotropy. The observed transmittances and relaxation times were found to depend strongly on the silica amount and chemical–physical properties of LC used in the sample preparation.     

α-chymotrypsin superactivity in cetyltrialkylammonium bromide-rich media

α-Chymotrypsin (α-CT) activity was tested with N-glutaryl-l-phenylalanine p-nitroanilide in buffered media with added cationic surfactants. The effect of the commercial cetyltrimethylammonium bromide (CTABr) was compared with that of three other surfactants with ethyl (CTEABr), propyl (CTPABr), and butyl (CTBABr) head groups. These were synthesized and purified in this laboratory. Surfactant head groups provided distinct environments that largely modulated the catalytic performance. Larger alkyl head group hydrophobicity led to a marked enhancement of α-CT activity. CTBABr-rich media induced the highest superactivity. Kinetic measurements were performed in Tris-HCl buffer at a surfactant concentration either below or above CMC, and α-CT superactivity occurred in both media. Positive interactions between the enzyme and surfactants happened independently of thesupramolecular organization of the medium. The reaction followed the Michaelis-Menten kinetics. The substrate to micelle aggregates binding constant was used to calculate the substrate concentration available for catalysis. The k _cat to k _m ratio was in CTBABr-rich media always higher than in pure buffer and depended on the surfactant concentration. α-CT superactivity depended on the pH value of buffer solution. Enzyme inactivation followed a single-step mechanism in pure buffer and a series mechanism in the presence of a surfactant. The rate of activity decay obeyed a first-order kinetics.     

Hydrosilylation of aromatic nitriles promoted by solvated rhodium atom-derived catalysts

Rhodium metal particles, isolated as supported or unsupported powder starting from mesitylene solvated rhodium atoms, catalyse the hydrosilylation of aromatic nitriles to N,N-disilylamines in high conversion at 100°C. Different hydrosilanes (HSiMe₃, HSi(OEt)₃) can be employed. In the case of cinnamonitrile, the chemoselectivity of the reaction to 2-trimethylsilyl-3-phenylpropionitrile and (E)- and (Z)-1-di(trimethylsilyl)amino-3-phenyl-1-propene is strongly dependent on the reaction temperature. The commercial rhodium on γ-Al₂O₃ catalyst is considerably less active and selective than the analogous catalyst prepared via Metal Vapour Synthesis (MVS) probably owing to the different dimension and distribution of the metal particles in the two samples as shown by HRTEM analysis.     

A computational investigation of HCN2+ isomeric structures: implications for the chemistry of Titan's atmosphere.

The structure and stability of various HCN2+ isomeric structures have been investigated at the complete active space SCF (CASSCF) and multireference-configuration interaction [MR-Cl-SD(Q)] levels of theory with the 6-31G(d) and 6-311G(d,p) basis sets. The investigated species include the singlet (S) and triplet (T) open-chain H-N-C-N+ ions 1S, 1S', and 1T, the open-chain H-C-N-N+ ions 2S, 2S', and 2T, the HC-N2+ cyclic structures 3S and 3T, and the HN-CN+ cyclic structures 4S and 4T. All these species have been identified as true energy minima on the CASSCF(8,7)/6-31G(d) potential energy surface, and their optimised geometries, refined at the CASSCF(8,8)/6-31G(d) level of theory, have been used to perform single point calculations at the [MR-Cl-SD(Q]/6-311G(d,p) computational level. The most stable structure was the H-N-C-N+ ion 1T, whose absolute enthalpy of formation at 298.15 K has been estimated as 333.9 +/- 2 kcalmol(-1) using the Gaussian-3 (G3) procedure. The two species closest in energy to 1T are the triplet H-C-N-N+ ion 2T and the singlet diazirinyl cation 3S, whose G3 enthalpies of formation at 298.15 K are 343.5 +/- 2 and 340.6 +/- 2 kcalmol(-1), respectively. Finally, we have discussed the implications of our calculations for the detailed structure of the HCN2+ ions formed in the reaction between N3+ and HCN, experimentally observed by flowing after-glow-selected ion flow/drift tube mass spectrometry and possibly occurring in Titan's atmosphere.     

Synthesis, characterisation and molecular structure of Re(III) 2-oxacyclocarbenes stabilised by a benzoyldiazenido ligand

A family of new Fischer-type rhenium(III) benzoyldiazenido-2-oxacyclocarbenes of formula [(ReCl2[eta1-N2C(O)Ph][=C(CH2)nCH(R)O](PPh3)2][n = 2, R = H (2), R = Me (3); n = 3, R = H (4), R = Me (5)] have been prepared by reaction of [ReCl2[eta2-N2C(Ph)O](PPh3)2] (1) with omega-alkynols, such as 3-butyn-1-ol, 4-pentyn-1-ol, 4-pentyn-2-ol, 5-hexyn-2-ol in refluxing THF. The correct formulation of the carbene derivatives 2-5 has been unambiguously determined in solution by NMR analysis and confirmed for compounds 2-4 by X-ray diffraction methods in the solid state. All complexes are octahedral with the benzoyldiazenido ligand, Re[N2C(O)Ph], adopting a "single bent" conformation. The coordination basal plane is completed by an oxacyclocarbene ligand and two chlorine atoms. Two triphenylphosphines in trans positions with respect to each other complete the octahedral geometry around rhenium. The reactivity of 1 towards different alkynes and alkenes including propargyl- and allylamine has been also studied. With propargyl amine, monosubstituted or bisubstituted complexes, [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2C triple bond CH]n(PPh3)(3-n)][n= 1 (6); n = 2 (7)], have been isolated depending on the reaction conditions. In contrast, the reaction with allylamine gave only the disubstituted complex [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2CH=CH2]2(PPh3)] (8). The molecular structure of the monosubstituted adduct has been confirmed by X-ray analysis in the solid state.     

The Dissociation Constants of 1,1'-Bis (pyridinium-4-aldoxime)trimethylene dibromide

The dissociation constants of the two oxime groups of 1,1-bis(pyridinium-4-aldoxime)trimethylene dibromide (TMB-4) were determined using spectrophotometric data. Two numerical methods were applied to treat the overlapping equilibria. The results obtained by both agreed with each other and their mean values at 25°C corrected for the ionic strength of 0.05moldm^–3 are pK_a1=7.49±0.11 and pK_a2=8.96±0.09. These values were discussed in terms of the pK_as of 1,1-bis(pyridinium-4-aldoxime)oxydimethylene dichloride (Toxogonin), a similar dioxime, which were derived by extrapolation of literature data.     

Random ethene/propene copolymerization from a catalyst system based on a “constrained geometry” half‐sandwich complex

Ethene/propene copolymerizations were performed in solution with a single centre catalyst system composed of a “constrained geometry” half‐sandwich organometallic complex {η¹: η⁵‐[(tert‐butylamido)dimethylsilyl](2,3,4,5‐tetramethyl‐1‐cyclopentadienyl)}titanium dichloride, and methylaluminoxane. The statistical treatment of polymerization data allowed to determine the reactivity ratios for ethene and propene: r_E = 1.35 ± 0.09, r_P = 0.82 ± 0.05, r_Er_P = 1.10 ± 0.14. This catalyst system promotes an almost random distribution of ethene and propene and gives rise to values of r_P and r_E very similar to each other.