A new reverse mode light shutter from silica-dispersed liquid crystals

Nanoparticle dispersions in liquid crystalline materials at low concentrations allow both investigating the formation of defects in liquid crystal (LC) and enhancing the light-scattering properties of LC optical devices. Reverse mode LC dispersions are LC devices, which look like transparent in their OFF state, when no electric field is applied, and opaque in their ON state. In this paper, a new reverse mode device, formed by a dispersion of a LC mixture in a silica nanoparticle crosslinked network, is presented. The morphology and the electro-optical properties of these silica nanoparticle/LC composites were investigated for two different LC mixtures with a negative dielectric anisotropy. The observed transmittances and relaxation times were found to depend strongly on the silica amount and chemical–physical properties of LC used in the sample preparation.     

Synthesis of Highly Fluorinated Chloroformates and Their Use as Derivatizing Agents for Hydrophilic Compounds and Drinking‐Water‐Disinfection By‐Products

A rapid, safe, and efficient procedure was developed to synthesize, on a small scale, fluorinated chloroformates often required to perform analytical derivatizations. This new family of agents allows straightforward derivatization of highly polar compounds (with multiple hydroxy, carboxy, and amino substituents) in the aqueous phase, compatible with GC and GC/MS analysis. A goal of this work was to develop a derivatization procedure that would enable the detection and identification of highly polar disinfection by‐products in drinking water.     

Functional and structural characterization of ovine ornithine transcarbamoylase

Ornithine transcarbamoylase from ovine liver has been purified to homogeneity. Like all anabolic OTCs, the ovine enzyme is a trimer, constituted by identical subunits of 34 kDa. Sequence analysis of the 54 N-terminal residues of ovine OTC shows a high degree of homology with the human enzyme. The optimum pH and the Michaelis constants for the catalytic reaction were determined. The ovine enzyme is the most thermostable one among mammals OTCs, its critical temperature being 6 degrees C higher than those measured for the other enzymes. The enzyme has been crystallised and the structure determined at 3.5 A resolution. Crystals belong to the cubic P4(3)32 space group, with a = b = c = 184.7 A and a solvent content of about 80%. There is no evidence of any ligand in the active site cavity, indicating that the crystals contain an unliganded or T state of the enzyme. The unliganded OTCase enzyme adopts a trimeric structure which, in the crystal, presents a three-fold axis coincident with the crystallographic one. The conformation of each monomer in the trimer is quite similar to that of the liganded human protein, with the exception of a few loops, directly interacting with the substrate(s), which are able to induce a rearrangement of the quaternary organisation of the trimer, that accounts for the cooperative behaviour of the enzyme following the binding of the substrates.     

Fibronectin conformation switch induced by coadsorption with human serum albumin

The dynamic adsorption of human serum albumin (HSA) and plasma fibronectin (Fn) onto hydrophobic poly(hydroxymethylsiloxane) (PHMS) and the structures of adsorbed protein layers from single and binary protein solutions were studied. Spectroscopic ellipsometry (SE) and quartz crystal microbalance with dissipation monitoring (QCM-D) together with atomic force microscopy (AFM) were used to measure the effective mass, thickness, viscoelastic properties, and morphology of the adsorbed protein films. Adsorbed HSA formed a rigid, tightly bound monolayer of deformed protein, and Fn adsorption yielded a thick, very viscoelastic layer that was firmly bound to the substrate. The mixed protein layers obtained from the coadsorption of binary equimolecular HSA-Fn solutions were found to be almost exclusively dominated by Fn molecules. Further sequential adsorption experiments showed little evidence of HSA adsorbed onto the predeposited Fn layer (denoted as Fn ? HSA), and Fn was not adsorbed onto predeposited HSA (HSA ? Fn). The conformational arrangement of the adsorbed Fn was analyzed in terms of the relative availability of two Fn domains. In particular, (4)F(1)·(5)F(1) binding domains in the Hep I fragment, close to the amino terminal of Fn, were targeted using a polyclonal antifibronectin antibody (anti-Fn), and the RGD sequence in the 10th segment, in the central region of the molecule, was tested by cell culture experiments. The results suggested that coadsorption with HSA induced the Fn switch from an open conformation, with the amino terminal subunit oriented toward the solution, to a close conformation, with the Fn central region oriented toward the solution.     

High Surface Area Mesoporous Silica Nanoparticles with Tunable Size in the Sub-Micrometer Regime: Insights on the Size and Porosity Control Mechanisms

Mesoporous silica nanostructures (MSNs) attract high interest due to their unique and tunable physical chemical features, including high specific surface area and large pore volume, that hold a great potential in a variety of fields, i.e., adsorption, catalysis, and biomedicine. An essential feature for biomedical application of MSNs is limiting MSN size in the sub-micrometer regime to control uptake and cell viability. However, careful size tuning in such a regime remains still challenging. We aim to tackling this issue by developing two synthetic procedures for MSN size modulation, performed in homogenous aqueous/ethanol solution or two-phase aqueous/ethyl acetate system. Both approaches make use of tetraethyl orthosilicate as precursor, in the presence of cetyltrimethylammonium bromide, as structure-directing agent, and NaOH, as base-catalyst. NaOH catalyzed syntheses usually require high temperature (>80 °C) and large reaction medium volume to trigger MSN formation and limit aggregation. Here, a successful modulation of MSNs size from 40 up to 150 nm is demonstrated to be achieved by purposely balancing synthesis conditions, being able, in addition, to keep reaction temperature not higher than 50 °C (30 °C and 50 °C, respectively) and reaction mixture volume low. Through a comprehensive and in-depth systematic morphological and structural investigation, the mechanism and kinetics that sustain the control of MSNs size in such low dimensional regime are defined, highlighting that modulation of size and pores of the structures are mainly mediated by base concentration, reaction time and temperature and ageing, for the homogenous phase approach, and by temperature for the two-phase synthesis. Finally, an in vitro study is performed on bEnd.3 cells to investigate on the cytotoxicity of the MNSs.     

Terminal Deoxy Hydroxyamino Sugars

Abstract

Reduction of sugar aldoximes gave in good yield the corresponding terminal deoxy hydroxyamino sugars. These compounds were found to be reasonably stable (they could be kept for some weeks at 4° C). On standing in the air, these compounds in solution were spontaneously oxidized to the corresponding nitroxide free radicals whose ESR spectra gave useful structural information.     

Nematic liquid crystal droplets with an enhanced quasi-linear electro-optical response

Nematic liquid crystal droplets dispersed in a thermoplastic matrix with a built-in d.c. electric field exhibit a quasi-linear response to an electric field. In this work we show a device characterized by a large light modulation. The device can store fields up to several V μm^-1 and operates well from d.c. to several kHz. In addition, we found that the experimental results are in agreement with a simple theoretical model for light scattering by a dispersion of liquid crystal droplets. This device allows us to overcome possible drawbacks, due to a reduced light modulation, in applications where polarity detection is required.     

Noble‐Gas Complexes: Theoretical Investigation of Multicenter Polynuclear Species

Ab initio calculations at the MP2 level of theory disclose the conceivable existence of neutral complexes containing four or five distinct noble gases (Ng) each bound to a distinct Be‐atom. These multicenter polynuclear Ng molecules are formally obtained by replacing the H‐atoms of CH₄ and but‐2‐yne with ? NBeNg moieties, which behave as independent monovalent ‘functional groups’. Our investigated complexes include the five homotetranuclear [C(NBeNg)₄] complexes 1 – 5 (Ng=He? Xe), the five heterotetranuclear complexes [CN₄Be₄(He)(Ne)(Ar)(Kr)] ( 6 ), [CN₄Be₄(He)(Ne)(Ar)(Xe)] ( 7 ), [CN₄Be₄(He)(Ne)(Kr)(Xe)] ( 8 ), [CN₄Be₄(He)(Ar)(Kr)(Xe)] ( 9 ), and [CN₄Be₄(Ne)(Ar)(Kr)(Xe)] ( 10 ), and the heteropentanuclear complex [HC₄N₅Be₅(He)(Ne)(Ar)(Kr)(Xe)] ( 11 ). We also investigated the five model complexes [H₃CNBeNg] (Ng=He? Xe) containing a single ? NBeNg moiety. The geometries and vibrational frequencies of all these species, invariably characterized as minimum‐energy structures, were computed at the MP2(full)/6‐31G(d,p)/SDD level of theory, and their stability with respect to the loss of the various Ng‐atoms was evaluated by single‐point calculations at the MP2(full)/6‐311G(d)/SDD level of theory. The beryllium‐Ng binding energies range from ca. 17 (Ng=He) to ca. 63 (Ng=Xe) kJ/mol, and the results of natural‐bond‐orbital (NBO) and atoms‐in‐molecules (AIM) analysis reveal that the Be? Ng interaction is essentially electrostatic for helium, neon, argon, and krypton, and has probably a small covalent contribution for xenon.     

Rapid and quantitative detection of the microbial spoilage in milk using Fourier transform infrared spectroscopy and chemometrics

Microbiological safety plays a very significant part in the quality control of milk and dairy products worldwide. Current methods used in the detection and enumeration of spoilage bacteria in pasteurized milk in the dairy industry, although accurate and sensitive, are time-consuming. FT-IR spectroscopy is a metabolic fingerprinting technique that can potentially be used to deliver results with the same accuracy and sensitivity, within minutes after minimal sample preparation. We tested this hypothesis using attenuated total reflectance (ATR), and high throughput (HT) FT-IR techniques. Three main types of pasteurized milk - whole, semi-skimmed and skimmed - were used and milk was allowed to spoil naturally by incubation at 15 degrees C. Samples for FT-IR were obtained at frequent, fixed time intervals and pH and total viable counts were also recorded. Multivariate statistical methods, including principal components-discriminant function analysis and partial least squares regression (PLSR), were then used to investigate the relationship between metabolic fingerprints and the total viable counts. FT-IR ATR data for all milks showed reasonable results for bacterial loads above 10(5) cfu ml(-1). By contrast, FT-IR HT provided more accurate results for lower viable bacterial counts down to 10(3) cfu ml(-1) for whole milk and, 4 x 10(2) cfu ml(-1) for semi-skimmed and skimmed milk. Using FT-IR with PLSR we were able to acquire a metabolic fingerprint rapidly and quantify the microbial load of milk samples accurately, with very little sample preparation. We believe that metabolic fingerprinting using FT-IR has very good potential for future use in the dairy industry as a rapid method of detection and enumeration.     

Synthesis and characterization of new poly(arylene ether)s containing heterocyclic units. II.

A series of new poly(arylene ether)s, containing naphthalene, pyridine, and quinoline units have been prepared by solution condensation polymerization. The synthesis involves nucleophilic displacement of aromatic dihalides with aromatic potassium bisphenates in an anhydrous dipolar aprotic solvent at elevated temperatures. The polymers, having inherent viscosity from 0.24 to 1.32 dL/g, were obtained in quantitative yield, have excellent thermal stability as shown by 10% weight loss temperatures in nitrogen and air (above 450 and 430°C, respectively) and high glass transition temperatures (in the range of 150–220°C). The introduction of quinoline moieties in the polymer backbone positively influences the thermal properties, such as high T_g/T_m ratios. © 1995 John Wiley & Sons, Inc.