New dehydration in the pyrrolo[1,2–6-b]isoquinoline series. Preparation and structural identification of 3,5-dihydrobenz[f]indolizin-3-one

3,5-Dihydrobenz[f]indolizin-3-one was prepared by a novel dehydration reaction involving the heating of 1,2,3,5,10,10a-hexahydro[f]indolizine-3,10-dione with polyphosphoric acid. The structure of this new compound was established by X-ray crystallography, by nmr spectroscopy and by reduction to the known products 1,2,3,5-tetrahydrobenz[f]indolizin-3-one and 1,2,3,5,10,10a-hexahydrobenz[f]indolizin-3-one.     

Ring‐Rearrangement Metathesis

Ring‐rearrangement metathesis (RRM) refers to the combination of several metathesis transformations into a domino process, in which an endocyclic double bond of a cycloolefin reacts with an exocyclic alkene. RRM has proven to be a powerful method for the rapid construction of complex structures. The extension of the basic ring‐opening–ring‐closing metathesis process by further metathesis steps as well as an examination of the driving forces, limits, scope, recent advantages, and future perspectives of these domino sequences is presented with various examples, thus reflecting the high efficiency and utility of RRM in organic synthesis.     

Catalytic (3 + 2) annulation of donor–acceptor aminocyclopropane monoesters and indoles

The efficient catalytic activation of donor–acceptor aminocyclopropanes lacking the commonly used diester acceptor is reported here in a (3 + 2) dearomative annulation with indoles. Bench-stable tosyl-protected aminocyclopropyl esters were converted into cycloadducts in 46–95% yields and up to 95 : 5 diastereomeric ratio using catalytic amounts of triethylsilyl triflimide. Tricyclic indoline frameworks containing four stereogenic centers including all-carbon quaternary centers were obtained.

A catalytic dearomatization of indoles with D–A aminocyclopropane monoesters for the synthesis of highly substituted indolines.     

The adsorption of endothelin 1 to phospholipids is governed by electrostatic interactions: A monolayer and fluorescence study

In order to elucidate the influence on the lipidic environment on the recognition process of its membrane associated receptor, the interactions of the vasoconstrictor peptide endothelin 1 with various phospholipids have been investigated using different lipidic model membranes: monolayers at constant surface pressure, vesicles and micelles. A monolayer study of ET1 adsorbed onto the water surface has shown that the C-terminus of the peptide points towards the aqueous phase. Penetration measurements into lipidic monolayers indicate that ET1 adsorbs to phospholipids with an orientation similar to that of the air–water interface and fluorescence measurements are in agreement with such an orientation of the peptide. This adsorption is selective for neutral phospholipids and indicates that the nature of the phospholipid headgroups is of major importance for the approach of the membrane associated receptor.     

Photosensitization of DNA damage by a new cationic pyropheophorbide derivative: sequence-specific formation of a frank scission

Pyropheophorbides are red-absorbing porphyrin-like photosensitizers that may interact with DNA either by intercalation or by external binding with self-stacking according to the value of the nucleotide to chromophore molar ratio (N/C). This article reports on the nature and sequence selectivity of the DNA damage photoinduced by a water-soluble chlorhydrate of aminopyropheophorbide. First, this pyropheophorbide is shown to induce on irradiation the cleavage of phiX174 DNA by both Type-I and -II mechanisms, suggested by scavengers and D2O effects. These conclusions are then improved by sequencing experiments performed on a 20-mer oligodeoxynucleotide (ODN) irradiated at wavelengths >345 nm in the presence of the dye, N/C varying from 2.5 to 0.5. Oxidation of all guanine residues to the same extent is observed after piperidine treatment on both single- and double-stranded ODN. Moreover, unexpectedly, a remarkable sequence-selective cleavage occurring at a 5'-CG-3' site is detected before alkali treatment. This frank break is clearly predominant for a low nucleotide to chromophore molar ratio, corresponding to a self-stacking of the dye along the DNA helix. The electrophoretic properties of the band suggest that this lesion results from a sugar oxidation, which leads via a base release to a ribonolactone residue. The proposal is supported by high-performance liquid chromatography-matrix-assisted laser desorption-ionization mass spectrometry experiments that also reveal other sequence-selective frank scissions of lower intensity at 5'-GC-3' or other 5'-CG-3' sites. This sequence selectivity is discussed with regard to the binding selectivity of cationic porphyrins.     

Digests or extracts?—Some interesting but conflicting results for three widely differing polluted sediment samples

Three sets of samples have been investigated in some detail. One set is from a river polluted by mine workings, containing substantial levels of Fe, Mn,Cu, Zn and Ni with traces of many other metals. The second set consists of typical estuarine sediments contaminated from a wide range of industrial sources, and the third set consists of oily drilling cuttings from the sea bottom in the vicinity of a North Sea oil production platform.These samples have been subjected to treatment 1) with EDTA at two different pH's (extracts) 2) with HNO₃/H₂O₂ 3) with HNO₃/HCl and 4) with HNO₃/HCl/HF (digests). EDTA recoveries, compared toaqua regia digests, are often very reproducible, not dependent on pH, and usually significantly low. Nitric/peroxide andaqua regia digests often give very close results suggesting that these are meaningful values indicating the maximum levels of polluting metals in the sediments. However, the triple acid digest with HF does sometimes give higher values (and reasonable agreement for CRM's such as MESS-1) but with poorer reproducibility.     

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).     

Molecular recognition in a uradinyl-functionalized stable radical

Stable radical 2-(6-uradinyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-1-oxyl (1) binds to hydrogen-bonding complement 2,6-di(propylamido)pyridine (DAP) in chloroform with Ka=220 M(-1) at 33 degrees C; ESI-MS shows not only 1:DAP complementary dyad formation, but also 1:(DAP)2 formation at higher concentrations of DAP.     

Vaporisation et dissociation thermique des sulfures de phosphore P4S3, P4S7 et P4S10 a l'etat gazeux

Résumé Nous avons montré par spectrométrie Raman à chaud et mesure des tensions de vapeur que P₄S₃ se vaporise de façon congruente tandis que P₄S₇ et P₄S₁₀ se dissocient dès le début de leur vaporisation. P₄S₇ donne réversiblement P₄S₃ et soufre. P₄S₁₀ se dissocie irréversiblement en P₄S₇ et soufre. A l'état de vapeur non saturante, P₄S₃ se dissocie au-dessus de 600° avec formation de phosphore, de soufre et d'autres espèces non identifiées.Nous avons mesuré expérimentalement la capacité calorifique de P₄S₃ liquide, calculé celle de P₄S₃ gazeux et son entropie standard. Nous avons aussi estimé l'enthalpie standard de vaporisation de P₄S₃ à l'aide des mesures des tensions de vapeur saturante. Nous en avons déduit l'entropie standard de P₄S₃ liquide et son point d'ébullition.

---

It is shown by Raman spectroscopy at high temperature and by vapor tensimetric measurements that the vaporisation of P₄S₃ is congruent, whereas P₄S₇ and P₄S₁₀ dissociate at the beginning of vaporisation. P₄S₇ gives P₄S₃ and sulfur reversibly. The dissociation of P₄S₁₀ into P₄S₇ and sulfur is irreversible. Above 600°, in non-saturated vapour the dissociation of P₄S₃ gives phosphorus, sulfur and some unidentified gaseous species. The heat capacity of liquid P₄S₃ has been measured. That of gaseous P₄S₃ and its standard entropy have been calculated. The vaporisation standard enthalpy of P₄S₃ has been estimated from the experimental results on the saturated vapour pressures. The standard entropy of liquid P₄S₃ and its boiling point have been derived from these data.

---

Zusammenfassung Mittels Raman-Spektrometrie bei erhöhter Temperatur und durch Messung der Dampfdrucke wurde festgestellt, daß sich P₄S₃ verflüchtigt, während P₄S₇ und P₄S₁₀ mit Beginn der Verflüchtigung dissoziieren. P₄S₇ ergibt reversibel P₄S₃ und Schwefel. Im Zustand ungesättigten Dampfes dissoziiert P₄S₃ oberhalb von 600° unter Bildung von Phosphor, Schwefel und anderer nicht identifizierter Substanzen.Die Wärmekapazität von flüssigem P₄S₃ wurde gemessen, während die vom gasförmigem P₄S₃ sowie seine Standard-Entropie berechnet wurden. Die Standard-Enthalpie der Verflüchtigung des P₄S₃ wurde durch Messungen der Sättigungs-Dampfdrucke ermittelt. Daraus wurden die Standard-Entropie des flüssigen P₄S₃ sowie sein Siedepunkt berechnet.

---

- - , P₄S₃ , P₄S₇ P₄S₁₀ . P₄S₇ P₄S₃ , P₄S₁₀ P₄S₇ . 600° P₄S₃ , . P₄S₃, P₄S₃ . P₄S₃. P₄S₃ .

---

---

Nous remercions Monsieur Letoffe du laboratoire du Professeur J. Bousquet, INSA de Lyon, 20 Avenue Albert Einstein 401, 69621 Villeurbanne, qui a r6alis6 pour nous les déterminations expérimentales des capacités calorifiques de P₄S₈ liquide.     

New stereoselective syntheses of cis- and trans-2-methyl-4-arylpiperidines

A stereoselective approach has been developed for the synthesis of cis- and trans-2-methyl-4-arylpiperidines from a common intermediate. The Ni-catalyzed hydrogenolysis of N-Boc-2-methyl-4-aryl-4-piperidinols, obtained by addition of organometallic reagents on N-Boc-2-methyl-4-piperidone, afforded the trans derivatives with up to 95% selectivity whereas the corresponding cis isomers were obtained in the presence of palladium catalysts.