Study of process parameters for starch,gluten, and glycerol mixtures

This work involved a study of the effect of processing variables (temperature, water content, rotor speed, and time) on the mechanical properties of starch:gluten:glycerol mixtures in the weight ratio of 40:40:20. The properties of the materials were affected by the processing variables. The torque decreased with water content, indicating that water facilitates the plasticization of mixtures, whereas the increase in temperature accelerated the evaporation of water, thus increasing the torque. Ultimate tensile strength was achieved at the lowest temperature (110°C) and the highest water content (20%), whereas maximum elongation was achieved for the material processed at the highest temperature, 150°C, and the fastest rotor speed, 70 rpm. Copyright © 2007 John Wiley & Sons, Ltd.     

LC-electron capture-APCI(-)-MS determination of nitrobenzoxadiazole derivatives

Nitrobenzoxadiazole (NBD) derivatives are determined with limits of detection ranging down to 20 nmol l(-1) using liquid chromatography-mass spectrometry (LC-MS) with electron capture (EC) ionisation. An atmospheric pressure chemical ionisation (APCI) interface operated in the negative ion mode is used as ionisation source. Amine derivatives of 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBDCl) as well as the isocyanate derivatives of 4-nitro-7-piperazino-2,1,3-nitrobenzoxadiazole (NBDPZ) have been analysed using this technique. The parameters favouring electron capture mechanisms have been investigated thoroughly under consideration of the competing mechanism of deprotonation to allow a better understanding of the electron capture process and to improve selectivity of the analysis.     

Consequences of the ‘Pedersen papers’ on crown type chemistry at Würzburg and Bonn Universities: From heteroaromatic crowns and podands to large molecular and crystalline cavities including multisite receptors,cascade molecules,chromoionophores, siderophores,surfactant-type,and extreme ligands

We thank the editors of this issue for the opportunity to present the historic development of crown chemistry at the Universities of Wurzburg and Bonn in memory of C. J. Pedersen, the originator of the crown ethers. His legacy of science has tremendously stimulated research at both universities.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Thioacetylacetone: structural and vibrational assignments.

Thioacetylacetone and its variously deuterated isotopomers have been investigated using electronic and vibrational spectroscopy combined with quantum chemical calculations. Thioacetylacetone is known for its photochromic properties, but the structures of the initial and final forms have been the subject of a long debate. Analysis of the IR spectra recorded in low-temperature argon and xenon matrices, room-temperature solutions, and in the gas phase has allowed us to establish the nature of the photochromic species and of its precursor. Similar to the case of another beta-thioxoketone, monothiodibenzoylmethane, the photo-product has been assigned to the nonchelated SH exo-rotamer of the (Z)-enethiol tautomeric form, whereas the dominant ground-state species corresponds to the chelated (Z)-enol tautomeric form. Detailed vibrational assignments have been proposed for both forms based on quantum chemical calculations and polarization experiments. In the case of the chelated (Z)-enol species prevailing in the ground state, a second-order perturbative anharmonic analysis at the B3LYP/cc-pVTZ level indicated strong anharmonic effects associated with the intramolecular hydrogen bond, leading to a shift of more than 600 cm-1 of the wavenumber of the OH-stretching vibration. A small fraction of the SH endo-rotameric chelated (Z)-enethiol form was also detected under unperturbed conditions. The (Z)-enethiol form can be converted into the (Z)-enol form by irradiation at 290 nm.     

Reductive cleavage of axially disymmetric tertiary amines and quaternary ammonium salts by lithium aluminium hydride. Synthesis of new 1,1′-binaphthyl substituted amines

Axially disymmetric tertiary amines or quaternary ammonium salts $\text{A}$ are synthesized by double alkylation of primary or secondary amines with racemic or optically pure 2,2′-bis (bromomethyl)-1,1′-binaphthyl. Their reductive cleavage by lithium aluminium hydride in refluxing THF leads to chiral secondary or tertiary amines $\text{B}$, substituted by a binaphthyl unit, with high yields and absence of racemization.     

Untersuchungen zurFriesschen Verschiebung von Estern derortho- undpara-Methoxybenzoesäure

TheFries rearrangement of different methoxy benzoates has been investigated. Frompara-methoxy benzoates the corresponding hydroxy-4-methoxy benzophenones could be obtained in good yields by treatment withLewis acids (especially TiCl₄) in nitromethane at 20°C (4-hydroxy derivatives) or without solvent at 120°C (2-hydroxy derivatives). Under the same conditions only demethylation occurs withortho-methoxy benzoates leading to the corresponding salicylates. Small amounts of hydroxy-2-methoxy benzophenones were obtained by treatment with polyphosphoric acid.

     

Measurement of Tumor Vascular Damage in Mice with 99m Tc-MIBI Following Photodynamic Therapy

Abstract— The clinical perfusion agent ^99mTc-MIBI was used to monitor changes in tumor vascular perfusion (TVP) induced by Photofrin® (Pll)-mediated photodynamic therapy (PDT). BALB/c mice bearing an EMT-6 tumor on each hind thigh were given an intravenous injection of 1, 2 or 5 mg kg⁻¹ PII. Twenty-four hours later, one tumor was illuminated (600–650 run, 200 mW cm⁻² 400 J cm⁻²) while the other served as a control. At various time intervals after PDT (0, 2 and 24 h) mice received an intravenous injection of ^99mTc-hexakismethoxy(sobutyusonitri-le (MIBI) (0.18 MBq g⁻¹) and were sacrificed 2 min later. The light-treated and the untreated tumors were then dissected, the radioactivity was counted and the percentage of the injected dose per gram of tumor (%ID g⁻¹) was calculated as a measure of TVP. We observed that TVP is drug dose dependent, develops progressively with time post-PDT and is inversely related to PDT efficacy. Our data show that early tumor retention of ^99mMIBI is a simple method to assess TVP and vascular damage induced by PDT.     

Separation and determination of aluminium by single-column ion-chromatography

A quick, reliable method for the determination of Al(III) in the presence of other metal ions is presented. A Chromatographic system consisting of a low-capacity cation-exchange column, an eluent of diprotonated p-phenylenediamine, and a conductivity detector was used to measure the retention times for various cations. During the course of this work, it was found that Al(III) was eluted later than most bivalent metal ions but earlier than other tervalent metal ions. Therefore the concentration of eluent was adjusted so that an early sharp peak was obtained for Al(III) and the bivalent metal ions were eluted as a group. Through analysis of an NBS standard, as well as of solutions containing Al(III) and other metal ions, the method was shown to be precise, accurate and rapid for determination of Al(III) without interference from common bivalent metal ions.     

Application of the photoionization detector for the determination of ethanol in aqueous solutions and human breath

A determination of ethanol is described, which is based on a purging system in conjunction with a photoionization detector. With that system a fast and reliable determination of ethanol in aqueous solutions is possible. The system has been used for the analysis of wine. The 3-detection limit has been 0.005% ethanol, the relative standard deviation 4.8 to 6.0% and the time constant of the entire analytical system 20 s. The photoionization detector has been also applied to the analysis of artificial and genuine human breath. A comparison with gas-chromatography and non-dispersive IR-detection has been proven the reliability of results.     

Assessing weak intramolecular donor-acceptor interactions using 1H-117Sn J-HMQC spectroscopy

It is demonstrated that long-range nJ(1H,117Sn) coupling constants down to 0.3 Hz, can be accurately quantified from non-linear fitting of the sine modulation of the associated 1H-117Sn correlation cross-peak intensities sampled as a function of the heteronuclear antiphase coherence preparation time in the 1H-117Sn J-HMQC pulse sequence. The contribution of additional, undesired modulations is illustrated and assessed using the product operator formalism, and is traced back to contributions that arise from miss-setting of the wandering 180 degrees pulse angle in the constant time period. The power of the method and its use in the characterization of weak intramolecular donor-acceptor interactions are illustrated by the determination of long-range nJ(1H,117Sn) coupling constants of bis[3-(dimethylamino)propyl]tin derivatives, [Me2N(CH2)3]2SnR2 (', R = Me; 3, R = Ph; 4, R = t-Bu). By comparing these with the values found for the corresponding bis(4-methylpentyl)tin derivatives, [Me2CH(CH2)3]2SnR2 (2', R = Me; 3', R = Ph), which lack such interactions, the use of long-range coupling constants to detect intramolecular donor-acceptor interactions is evaluated. It is concluded that nJ(1H,117Sn) couplings up to six bonds through an organic carbon chain can be quantified, whether donor-acceptor interactions are present or not. Furthermore, evidence is presented that, when two scalar coupling pathways co-exist, the pathway involving an intramolecular donor-acceptor interaction can have opposite sign, thus decreasing the overall coupling constant to a value smaller than that actually measured in the absence of a donor-acceptor interaction, where only one coupling pathway is active. There is nevertheless clear numerical value discrimination in the series of compounds investigated between long-range couplings in derivatives without weak intramolecular donor-acceptor interactions and those where such interactions can exist.