Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.     

A brittle material with tunable elasticity: Crêpe paper

We study the mechanical response, and tearing features of crêpe paper, a two-dimensional, very anisotropic material, with one direction much less stiff than the other one. Depending on how the soft direction has been pre-stretched or not, the apparent Young modulus of the material can be varied over a broad range, while its fracture energy remains unaltered. The classical tearing concertina problem shows that a macroscopic measurement (the shape of the teared region) provides a direct access to the fracture properties of the material (effective Young's modulus, and fracture energy). The overall discussion is conducted in the frame of Griffith's theory of fracture.     

Polymerization kinetic pathways of epoxidized linseed oil with aliphatic bio-based dicarboxylic acids

The curing of epoxidized linseed oil (ELO) with three different bio-based dicarboxylic acids (sebacic acid, suberic acid, and succinic acid) has been investigated. No accelerators or catalysts were used and the resulting thermosets are 100% bio-based. Structural investigations of the three crosslinked ELO resins were made using FTIR spectroscopy and TMA, that is, tensile tests, TGA, and DMA. As evidenced by FTIR measurements ELO and dicarboxylic acids reacts but no major differences can be distinguished between the dicarboxylic acids. Non-isothermal curing has been conducted by rheological and DSC measurements. Advanced isoconversional analysis applied to DSC data in association with the complex viscosity variations gives new insights into the polymerization mechanism. The length of dicarboxylic acid carbon chain modifies the reaction rate. Then, a correlation between reaction rate, activation energy, pre-exponential factors, polymerization mechanism, and change in rate-limiting step was shown. DMA and tensile tests highlight the relationship between the carbon chain length, reactivity, and thermomechanical properties. The use of succinic acid allows reaching a higher T_g and thermal stability.     

The pyrolysis of propane

The pyrolysis of propane plays an important role in determining the combustion properties of natural gas mixtures and offers insight into the cracking patterns of larger fuels. This work investigates propane pyrolysis behind reflected shock waves with a multiwavelength laser-absorption speciation technique. Nine laser wavelengths, sensitive to key pyrolysis species, were used to measure absorbance time histories during the decomposition of 2% propane in argon between 1022 and 1467 K, 3.7-4.3 atm. Absorbance models were developed at each diagnostic wavelength to interrogate common initial conditions, and time histories of all major species are reported at 1250, 1290, 1330, 1370, and 1410 K. Nearly complete carbon recovery observed at lower temperatures enabled the inference of hydrogen formation from atomic conservation, while decaying carbon recovery at high temperatures suggests the formation of allene and 1-butene. The results show systematically faster pyrolysis than predicted by kinetic modeling and motivate further study into the kinetics of propane pyrolysis.     

Adaptive estimation of the stationary density of a stochastic differential equation driven by a fractional Brownian motion

Statistical Inference for Stochastic Processes - We build and study a data-driven procedure for the estimation of the stationary density f of an additive fractional SDE. To this end, we also prove...     

Operando Isotopic Exchange in Solid Oxide Fuel Cells: Oxygen-Transport Dependency on Applied Potential

The oxygen isotopic exchange technique is a powerful tool to investigate the oxygen transport kinetics in an oxide solid. In a solid oxide fuel cell, isotopic surface exchange and diffusion coefficients are classically determined by using the Isotopic Exchange Depth Profiling method followed by ex situ SIMS characterizations. Despite its relevance, the utilization of in situ or operando techniques to measure the isotopic exchange under an electrical bias remains marginal. We developed here a set-up which enables operando monitoring of oxygen exchange in SOFC type cells under polarization. The system has been used for studying the oxygen mobility dependency upon polarization on a symmetrical Pt/YSZ/Pt cell (YSZ: yttria-stabilized zirconia). Homomolecular and heterolytic exchange reactions were undertaken to investigate the oxygen activation step and discriminate the limiting step among the sequence of elementary steps which constitute the oxygen transport process in the SOFC system. Oxygen ions incorporation into the dense ionic conductor was identified to be the rate determining step, and its first order rate constant dependency on applied potential was established.     

Vinyl nosylates as partner in copper and silver co-catalyzed Sonogashira cross-coupling reactions

Vinyl nosylates, readily obtained from β-dicarbonyl derivatives, could be efficiently engaged in Sonogashira cross-coupling reactions, either cocatalyzed by copper or silver salts. The para-nitrobenzenesulfonate (nosylate) group allows this coupling to be performed under very mild conditions (room temperature). These new leaving group and mild conditions could be applied to the synthesis of acetylenic coumarinyl derivatives and to the total synthesis of an acetylenic monoterpene natural product, named cleviolide.     

Modelling the dynamics of stochastic local search on <Emphasis Type="Italic">k</Emphasis>-<Emphasis Type="SmallCaps">sat</Emphasis>

A new analytical tool is presented to provide a better understanding of the search space of k-sat. This tool, termed the local value distribution , describes the probability of finding assignments of any value q′ in the neighbourhood of assignments of value q. The local value distribution is then used to define a Markov model to model the dynamics of a corresponding stochastic local search algorithm for k-sat. The model is evaluated by comparing the predicted algorithm dynamics to experimental results. In most cases the fit of the model to the experimental results is very good, but limitations are also recognised.