Mn(approximately)2.4Mo6O9: first example of empty twin chains of edge-sharing M6 octahedra in transition metal cluster chemistry

The novel ternary reduced molybdenum oxide Mn(approximately)(2.4)Mo(6)O(9) has been synthesized by solid-state reaction at 1400 degrees C for 96 h in sealed molybdenum crucibles. Electron diffraction studies showed that Mn(approximately)(2.4)Mo(6)O(9) presents a complex crystal structure with a 3d incommensurate modulation. The average crystal structure was determined on a single-crystal by X-ray diffraction in the orthorhombic space group Pnma with the following lattice parameters: a = 16.4824(2) A, b = 2.8273(2) A, c = 17.3283(2) A, Z = 4. The Mo network consists of empty twin chains of trans-edge-sharing octahedra that occur for the first time in a solid-state compound. The Mo-Mo distances within the chains range from 2.62 to 2.92 A, and the Mo-O distances from 1.99 to 2.17 A as usually observed in the reduced molybdenum oxides. Single-crystal resistivity measurements show that Mn(approximately)(2.4)Mo(6)O(9) is metallic between 4.2 and 300 K. The magnetic susceptibility data indicate paramagnetic behavior due to the Mn(2+) moment at high temperatures with a weak ferromagnetic behavior below 80 K.     

A novel layered oxysulfide intergrowth compound Sr4Mn2Cu5O4S5 containing a fragment of the alpha-Cu2S antifluorite structure

Sr4Mn2Cu5O4S5 contains manganese oxide sheets separated by unusual antifluorite-type Cu3S3 layers in which copper(I) ions are distributed over three- and four-coordinates sites in a similar fashion to in alpha-Cu2-xS and suggestive of high two-dimensional copper ion mobility.     

Development of a multiplexed microbioreactor system for high-throughput bioprocessing

A multiplexed microbioreactor system for parallel operation of multiple microbial fermentation is described. The system includes miniature motors for magnetic stirring of the microbioreactors and optics to monitor the fermentation parameters optical density (OD), dissolved oxygen (DO), and pH, in-situ and in real time. The microbioreactors are fabricated out of poly(methylmethacrylate)(PMMA) and poly(dimethylsiloxane)(PDMS), and have a working volume of 150 microl. Oxygenation of the cells occurs through a thin PDMS membrane at the top of the reactor chamber. Stirring is achieved with a magnetic spin bar in the reactor chamber. Parallel microbial fermentations with Escherichia coli are carried out in four stirred microbioreactors and demonstrate the reproducible performance of the multiplexed system. The profiles for OD, DO, and pH compare favourably to fermentations performed in bioreactor systems with multiple bench-scale reactors. Finally, the multiplexed system is used to compare two different reactor designs, demonstrating that the reproducibility of the system permits the quantification of microbioreactor performance.     

Verification of gamma-spectroscopy programs: Accuracy and detectability

The newly revised ANSI N42.14^1.2 has provided analysis software developers with a set of well defined, consistent and unbiased procedures designed to evaluate the accuracy and limitations of peak search and peak area analysis programs. This work uses two of the procedures outlined in this standard to evaluate five peak analysis algorithms currently in use in Canberra and Nuclear Data software packages. The first procedure examines a program's behavior as the centroid separation and peak height ratio of a doublet are varied. A previous review of these data³ demonstrated significant peak area inaccuracies at peak separations at or below 1.5 FWHM. We will discuss improvements made to some of these programs and the impact on the doublet results. The second procedure examines a program's behavior as the Compton continuum beneath a fixed peak area is increased. For the same five algorithms we will discuss the dependence of peak area on Compton continuum and also explore the limits of peak detectability.     

Efficient synthesis of bromocyclopenta[b] indoles via a bromination ‐ reduction sequence

Substituted cyclopenta[b]indoles are selectively brominated in good yields with excess pyridine ‐ Br₂ charge‐transfer complex (PyBr₂) in a one‐pot reaction to provide 5 and/or 7‐bromoindoles. The mechanism involves the formation of an adduct (addition of bromine on the central double bond) which is subsequently reduced in situ with Zn and AcOH. A variety of functional groups in the cyclopentyl and the benzenoid rings are tolerated.     

The electronic spectrum of the triethylamine-perfluoro-tert-butanol complex

The far-ultraviolet absorption spectrum of the triethylamine-perfluoro-tert-butanol complex has been measured in the gas phase. The photoelectron band of lowest energy has also been determined. It is about 13000 cm^?1 higher than for free triethylamine. Up to at least 60000 cm^?1, the UV spectrum is readily interpreted as a triethylamine spectrum shifted to higher frequencies by about 13000 cm^?1. The bands of lowest frequency are the 3s and 3p Rydberg bands which follow the ionization potential. Up to 60000 cm^?1, no charge transfer type band has been found.     

Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Novel methods for the synthesis of 5-substituted-3-carboxy-2,5- and 4,5-dihydrothiophenes and 5-substituted 2- and 3-sulfolenes

Various approaches to the syntheses of 5-substituted-3-carbomethoxy-2,5-dihydrothiophenes and their product sulfolenes, required as synthetic precursors for tangutorine, are described. An efficient route to 3,5-disubstituted-4,5-dihydrothiophenes and hence 3,5-disubstituted-2-sulfolenes by radical chemistry is also described.     

Determination of weak (2.0–2.5) dissociation constants of non-UV absorbing solutes by capillary electrophoresis

Summary Capillary electrophoresis (CE) has proved to be a fast and convenient method for the determination of the dissociation constants of non-UV absorbing solutes in the acidic pK _A range (2.0–2.5). The electroosmotic flow was reversed by washing the capillary with 0.2% polybren aqueous solution. A series of background electrolytes was prepared with phenylphosphonic acid (pK _A=1.29) and β-alanine (pK _A=3.55) with the same ionic strength and a high buffer capacity in order to improve the repeatability (0.1–0.2 %) of the electrophoretic mobility and to determine the values of pK _A accurately. This procedure was applied to the determination of the dissociation constants of several alkyl-alkylphosphonic acids whose pK _A values have not yet been published in the literature. In this work, their dissociation constants have been found to vary between 1.91 and 2.34 for alkyl-methylphosphonic acids and between 2.10 and 2.38 for alkyl-ethylphosphonic acids.     

Design and characterization of libraries of molecular fragments for use in NMR screening against protein targets

We have designed four generations of a low molecular weight fragment library for use in NMR-based screening against protein targets. The library initially contained 723 fragments which were selected manually from the Available Chemicals Directory. A series of in silico filters and property calculations were developed to automate the selection process, allowing a larger database of 1.79 M available compounds to be searched for a further 357 compounds that were added to the library. A kinase binding pharmacophore was then derived to select 174 kinase-focused fragments. Finally, an additional 61 fragments were selected to increase the number of different pharmacophores represented within the library. All of the fragments added to the library passed quality checks to ensure they were suitable for the screening protocol, with appropriate solubility, purity, chemical stability, and unambiguous NMR spectrum. The successive generations of libraries have been characterized through analysis of structural properties (molecular weight, lipophilicity, polar surface area, number of rotatable bonds, and hydrogen-bonding potential) and by analyzing their pharmacophoric complexity. These calculations have been used to compare the fragment libraries with a drug-like reference set of compounds and a set of molecules that bind to protein active sites. In addition, an analysis of the overall results of screening the library against the ATP binding site of two protein targets (HSP90 and CDK2) reveals different patterns of fragment binding, demonstrating that the approach can find selective compounds that discriminate between related binding sites.