Examination of the swelling of heat protective hydrocolloids by DSC

While the basic fermented (sour) milk products, such as yogurt and kefir can be produced only in live flora version, the post heat-treatment is preferred in their flavored variations to increase the storage time. Casein being in sour coagulum precipitates during heat-treatment; therefore protective colloids surrounding the protein should be used to prevent it. Protective colloids are plant extracts, the most known of them are pectin and amylopectin. Basic requirement of protective colloid effect is the lower swelling temperature of hydrocolloid than the temperature of precipitation of sour coagulum. In this work we have examined the precipitation of sour coagulum as a function of the type of lactic acid bacteria cultures applied during fermentation as well as the swelling of heat protective plant hydrocolloids as a function of the composition (mainly of sugar content) of medium. To investigate the precipitation of fermented coagulum skimmed milk was fermented with mesophilic butter culture, thermophilic yogurt culture as well as with exopolysaccharide (EPS)-producing Prebiolact-2 culture. Precipitation was indicated in the increase of great extent of viscosity. Amylopectin was dispersed into aqueous solution of pH 4.5, the saccharose concentration of which was changed during the investigation of the swelling of heat protective hydrocolloids. A definite exothermic peak was assigned to the swelling of hydrocolloids during the DSC experiments. We could conclude that the precipitation temperature was increasing in the mesophilic-thermophilic-EPS producing microbes line, i.e. the heat stability and swelling temperature of hydrocolloids depend on the saccharose content of aqueous medium and they increase with rising the concentration of saccharose.     

Effects of solutions used for storage of size-exclusion columns on subsequent chromatography of peptides and proteins

The effects of storage of size-exclusion column packing materials in methanolic or azide-water solutions on subsequent separations were tested. Three commercially available columns were used in these studies; the Toyo-Soda Bio-Sil TSK 125, Bio-Sil TSK 250 and the DuPont Bio-Series GF-250. Upon initial chromatography, all three columns bound up to 760 micrograms of cytochrome c tryptic peptides. Sample binding to packing material is probably a function of the positively charged basic groups on peptides or proteins interacting with silanol groups. The larger the peptide, the less the opportunity for silanol-charged group interaction, hence, less binding. Initial samples introduced to a new column occupy the binding sites. Equilibration with neat methanol removes the bound protein revealing sites which bind sample. After absorption of peptides to binding sites on the packing material, storage in neat methanol regenerates the binding sites. Storage in 10% methanol diminished the binding phenomenon, but storage in azide-water reduced binding to a range below detection at the microgram level. Our recommendation to users of size-exclusion chromatographic columns is that one satisfy the absorption capacity of a new column by injecting a sufficient quantity of a basic peptide standard or other convenient sample to reduce available binding sites before using the column for important separations. Store columns in azide-water or 10% methanol to prevent the regeneration of exposed silanol groups.     

Hairdressing shish-kebabs; comprehensive survey and theoretical discussion of overgrowth crystallization

The platelet component of shish-kebabs crystallizes after the core, during cooling or storage below the formation temperature of the core. Three basic platelet morphologies were previously identified which were mutually interconvertible, a process we have termed “hairdressing”. In this paper we show that these three categories are special cases of a continuous range of overgrowth spacings. Crystallization at high temperatures gives widely spaced overgrowths and, as the crystallization temperature is reduced, so the overgrowth spacing decreases gradually. In the extreme case (only obtainable by quenching) the overgrowths become so close as to overlap and appear continuous. We also report a variety of further effects which were caused by exposing the shish-kebabs, while in solvent, to temperatures above their initial formation temperature. A new theoretical approach is described which considers the depletion of material available to form new overgrowths during crystallization. Two versions of this theory are presented (one a computer simulation and one analytic); interpreting our results on the basis of this theory we show that shish-kebabs crystallize at high temperatures even when quenched (90°C and above except in a few exceptional circumstances) and we are able to explain all the features of shish-kebab crystallization that we have observed.     

A doubly deprotonated form of calix[6]arene: Crystal and molecular structure of (calix[6]arene-2H)2−·(HNEt 3 + )2

The doubly deprotonated form of calix[6]arene, with two protonated triethylamines as counter-ions, crystallizes in the monoclinic system: space groupP2₁/n,a=8.465(4),b=17.822(8),c=15.182(6) Å,=90.18(4)°,V=2291(2) ų,Z=2. Refinement led to a final conventionalR value of 0.063 for 1046 reflections. The macrocycle conformation is not apinched cone, usual for freeR-calix[6]arene, but a distorted 1,2,3-alternate cone, since the molecule lies on a symmetry center. Furthermore, one of the torsion angles defined by the methylene bridges is near to zero, which is unusual in calixarene structures. Supplementary Data relating to this article (atomic coordinates for hydrogen atoms, anisotropic displacement parameters for oxygen and nitrogen atoms, and observed and calculated structure factors) are deposited with the British Library as Supplementary Publication No. SUP 82182 (7 pages).     

Efficient synthesis of bromocyclopenta[b] indoles via a bromination ‐ reduction sequence

Substituted cyclopenta[b]indoles are selectively brominated in good yields with excess pyridine ‐ Br₂ charge‐transfer complex (PyBr₂) in a one‐pot reaction to provide 5 and/or 7‐bromoindoles. The mechanism involves the formation of an adduct (addition of bromine on the central double bond) which is subsequently reduced in situ with Zn and AcOH. A variety of functional groups in the cyclopentyl and the benzenoid rings are tolerated.     

Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Synthesis,crystal structure,magnetism, and absorption spectra of A2UX5 Type Halides (A = K,Rb; X = Cl,Br, I)

The ternary uranium(III) halides A₂UX₅ (A = K, Rb; X = Cl, Br, I) have been prepared from the binary components AX and UX₃ in sealed tantalum containers. According to their Guinier X-ray powder patterns, they all crystallize with the K₂PrCl₅/Y₂HfS₅ type of structure. Lattice constants for ambient temperature are reported. Single-crystal structure refinemens were undertaken for K₂UI₅ and Rb₂UCl₅. Magnetic susceptibility data were recorded with a SQUID magnetometer from liquid helium to room temperature. One-dimensional (intrachain) and three-dimensional antiferromagnetic ordering occur at low temperatures dependent upon the U³⁺? U³⁺ distance. Absorption spectra were recorded between 4 000 and 28 000 cm^?1. They show f—f transitions typical for U³⁺ and, depending on the halide, very strong f—d transitions above 14 000 to 15 000 cm^?1, respectively.     

Novel methods for the synthesis of 5-substituted-3-carboxy-2,5- and 4,5-dihydrothiophenes and 5-substituted 2- and 3-sulfolenes

Various approaches to the syntheses of 5-substituted-3-carbomethoxy-2,5-dihydrothiophenes and their product sulfolenes, required as synthetic precursors for tangutorine, are described. An efficient route to 3,5-disubstituted-4,5-dihydrothiophenes and hence 3,5-disubstituted-2-sulfolenes by radical chemistry is also described.     

Design and characterization of libraries of molecular fragments for use in NMR screening against protein targets

We have designed four generations of a low molecular weight fragment library for use in NMR-based screening against protein targets. The library initially contained 723 fragments which were selected manually from the Available Chemicals Directory. A series of in silico filters and property calculations were developed to automate the selection process, allowing a larger database of 1.79 M available compounds to be searched for a further 357 compounds that were added to the library. A kinase binding pharmacophore was then derived to select 174 kinase-focused fragments. Finally, an additional 61 fragments were selected to increase the number of different pharmacophores represented within the library. All of the fragments added to the library passed quality checks to ensure they were suitable for the screening protocol, with appropriate solubility, purity, chemical stability, and unambiguous NMR spectrum. The successive generations of libraries have been characterized through analysis of structural properties (molecular weight, lipophilicity, polar surface area, number of rotatable bonds, and hydrogen-bonding potential) and by analyzing their pharmacophoric complexity. These calculations have been used to compare the fragment libraries with a drug-like reference set of compounds and a set of molecules that bind to protein active sites. In addition, an analysis of the overall results of screening the library against the ATP binding site of two protein targets (HSP90 and CDK2) reveals different patterns of fragment binding, demonstrating that the approach can find selective compounds that discriminate between related binding sites.     

Resonant oscillations in open tubes

Summary The problem of a gas-filled tube excited by sinusoidal piston motion at one end and open at the other end is reinvestigated.It is shown that the key idea for the solution of the problem is a suitable combination of the usual amplitude nonlinearity and distortion effects. The main consequence of this is that the solution cannot be expressed in terms of a hierarchy associated with an expansion in the Mach number. Nevertheless an equation can be constructed which describes the behaviour of the flow in the limit of small Mach numbers. At the open end shock waves appear in the solution within a well-defined frequency band at each resonant frequency. Two different models which have been proposed by Wijngaarden and Jimenez respectively are used to define the boundary condition. It is seen that some basic properties of the resonant oscillations are independent of the boundary condition. Wijngaarden's model leads to very good agreement with results from several different experimenters. In this case, the width of the frequency interval where shocks occur is of the orderO(M); the width of the resonance band is of the orderO(M ^1/2), just as for the closed end tube.

---

Zusammenfassung Betrachtet wird ein mit Gas gefülltes Rohr, welches an einem Ende offen ist und am andern Ende von einem harmonisch schwingenden Kolben angetrieben wird. Der Schlüssel zur Lösung dieses Problems ist eine geeignete Kombination der üblichen Amplitudennichtlinearität mit den Dispersionseffekten. Dies führt auf die grundlegende Konsequenz, dass es nicht möglich ist, die Lösung im Rahmen einer Hierarchie auszudrücken, welche aus einer Entwicklung in der Machzahl hervorgeht. Es ist gleichwohl möglich, eine Gleichung zu konstruieren, welche die Gasschwingungen für kleine Machzahlen beschreibt. Am offenen Ende treten innerhalb eines wohldefinierten Frequenzbandes (bei jeder Resonanzfrequenz) Stosswellen auf. Zur Definition der Randbedingung am offenen Ende werden zwei Modelle benützt, die (beziehungsweise) von Wijngaarden und Jimenez vorgeschlagen wurden. Einige der grundlegenden Eigenschaften der Lösungen sind unabhängig von der Randbedingung. Wijngaardens Modell führt auf sehr gute Übereinstimmung mit typischen Experimenten. In diesem Fall ist die Breite des Intervalls, in welchen Stösse auftreten, von der Ordnung O(M); die Breite des Resonanzbandes ist (in Übereinstimmung mit den Ergebnissen vom geschlossenen Rohr) von der OrdnungO(M ^1/2).