Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experiment

Monte Carlo simulations, experimental titrations and fluorescence correlation spectroscopy experiments were used to investigate the conformational and electrical properties of polyacrylic acids (PAA). On the one hand, titration curves were calculated to get an insight into the role of pH on the degree of ionization and conformation of PAA chains. On the other hand, experimental potentiometric titrations of PAA were also achieved for different PAA molecular weights and compared to the calculated titration curves obtained by Monte Carlo coarse grained simulations. It was found that for a large range at intermediate PAA ionizations, a good correlation is obtained between experimental and simulations data thanks to the prominence of electrostatic interactions in this domain. The effect of ionic concentration and PAA molecular weight on the titration curves was also investigated. In order to get a better understanding of PAA conformational behavior, we also investigated PAA diffusion properties in aqueous solutions as a function of pH and ionic strength by fluorescence correlation spectroscopy (FCS), thanks to its high sensitivity to measure diffusion coefficients of tracer solutes. Good qualitative agreements were observed between experimental diffusivities and polymer properties calculated from MC simulations. It was shown that the high molecular weight PAA chains display more significant changes in diffusivity in agreement with the ionization degrees and conformational changes observed in the simulations.     

High-spin to low-spin relaxation kinetics in the [Fe(TRIM)2]Cl2 complex

A quasi-quantitative photo-induced low-spin (LS)-->high-spin (HS) conversion of FeII ions has been observed in the [Fe(TRIM)2]Cl2 complex by irradiating the sample with blue light (488 nm) at 10 K. The time dependence of the HS-->LS relaxation has been studied between 10 K and 44 K by means of magnetic susceptibility measurements. These relaxation curves could be satisfactorily fitted by mono-exponential decays including tunnelling effect except for temperatures below 30 K. The introduction of a distribution of vibrational frequencies into this model improved significantly the fits in the low-temperature range and gave a good agreement with the experimental data in the whole temperature range suggesting a multi-rate relaxation process in this complex.     

Design, synthesis, and evaluation of a biomimetic artificial photolyase model

Two new artificial photolyase models that recognize pyrimidine dimers in protic and aprotic organic solvents as well as in water through a combination of charge and hydrogen-bonding interactions and use a mimic of the flavine to achieve repair through reductive photoinduced electron transfer are presented. Fluorescence and NMR titration studies show that it forms a 1:1 complex with pyrimidine dimers with binding constants of approximately 10(3) M(-1) in acetonitrile or methanol, while binding constants in water at pH 7.2 are slightly lower. Excitation of the complex with visible light leads to clean and rapid cycloreversion of the pyrimidine dimer through photoinduced electron transfer catalysis. The reaction in water is significantly faster than in organic solvents. The reaction slows down at higher conversions due to product inhibition.     

Quantitative analysis of backbone dynamics in a crystalline protein from nitrogen-15 spin-lattice relaxation

A detailed analysis of nitrogen-15 longitudinal relaxation times in microcrystalline proteins is presented. A theoretical model to quantitatively interpret relaxation times is developed in terms of motional amplitude and characteristic time scale. Different averaging schemes are examined in order to propose an analysis of relaxation curves that takes into account the specificity of MAS experiments. In particular, it is shown that magic angle spinning averages the relaxation rate experienced by a single spin over one rotor period, resulting in individual relaxation curves that are dependent on the orientation of their corresponding carousel with respect to the rotor axis. Powder averaging thus leads to a nonexponential behavior in the observed decay curves. We extract dynamic information from experimental decay curves, using a diffusion in a cone model. We apply this study to the analysis of spin-lattice relaxation rates of the microcrystalline protein Crh at two different fields and determine differential dynamic parameters for several residues in the protein.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

Cross-linking of polyolefins: a study by thermoporosimetry with benzene derivatives as swelling solvents.

The solvents o-, m-, p-xylene, p-dichlorobenzene, 1,2,4-trichlorobenzene, and naphthalene were calibrated as condensates used in the thermoporosimetry technique. Exponential relationships were found connecting the pore radii R(p) (in nm) and the freezing-point depression of the swelling solvent deltaT (in degrees C) on the one hand and the apparent energy of crystallization W(a) (in J cm(-3)) and deltaT on the other hand: R(p) = t exp[-1/(c deltaT)]; W(a) = W0 exp(deltaT/f). Pore- or mesh-size distributions can be derived from differential scanning calorimetry results by using the following equation: dV(p)/dR(p) = k{[cY(T)deltaT2]/[W(a)R(p)]}. All the numerical parameters were determined. Polyethylene and polypropylene samples, cross-linked with high-energy electrons or gamma-rays, were submitted to thermoporosimetry study. Relative mesh-size distributions, which depend on the polymer/solvent pair, were calculated for these polyolefins with o-, m-, and p-xylene as solvent and were found to be in the same sequence as those of their degrees of swelling and the irradiation doses received.     

Sensitive determination of josamycin and rokitamycin in plasma by high-performance liquid chromatography with fluorescence detection.

Rokitamycin and josamycin were successfully derivatized with dansylhydrazine in 20 min at 60 degrees C. Rokitamycin and josamycin levels were determined in plasma after ion-pair extraction into hexane-isoamyl alcohol with lauryl sulphate and precolumn derivatization. Resolution was obtained by liquid chromatography with fluorescence detection (352/537 nm) in 12 min. The limit of detection was 20 ng/ml macrolide starting from 1 ml of plasma, and linearity was demonstrated between 50 and 400 ng/ml. Inter-run coefficients of variation were 10.2% at 100 ng/ml and 9.1% at 300 ng/ml. The system was reliably used for pharmacokinetic studies in plasma.     

Surface organometallic chemistry of main group elements: selective synthesis of silica supported [triple bond Si-OB(C(6)F(5))(3)](-)[HNEt(2)Ph](+)

The reaction of the Lewis acid B(C(6)F(5))(3) with silanol groups of silica surfaces, dehydroxylated at different temperatures (300, 500, 700, and 800 degrees C), has been investigated in presence of the Br?nsted base NEt(2)Ph. The structure of the resulting modified silica supports [triple bond Si-OB(C(6)F(5))(3)](-)[HNEt(2)Ph](+) (1) has been carefully identified by IR and multinuclear solid-state NMR spectroscopies, isotopic (2)H and (18)O labeling, elemental analysis, molecular modeling, and comparison with synthesized molecular models. Highly dehydroxylated silica surfaces were required to transform selectively each silanol group into unique [triple bond Si-OB(C(6)F(5))(3)](-)[HNEt(2)Ph](+) fragments. For lower dehydroxylation temperatures, two sorts of surface sites were coexisting on silica: the free silanol groups [triple bond SiOH] and the ionic species 1.     

Electron capture dissociation of polypeptides using a 3 Tesla Fourier transform ion cyclotron resonance mass spectrometer

Electron capture dissociation (ECD) of polypeptides has been demonstrated using a commercially available 3 Tesla Fourier transform ion cyclotron resonance (FTICR) instrument. A conventional rhenium filament, designed for high-energy electron impact ionisation, was used to effect ECD of substance P, bee venom melittin and bovine insulin, oxidised B chain. A retarding field analysis of the effective electron kinetic energy distribution entering the ICR cell suggests that one of the most important parameters governing ECD for this particular instrument is the need to employ low trapping plate voltages. This is shown to maximise the abundance of low-energy electrons. The demonstration of ECD at this relatively low magnetic field strength could offer the prospect of more routine ECD analysis for the wider research community, given the reduced cost of such magnets and (at least theoretically) the greater ease of electron/ion cloud overlap at lower field.