A new DMAP-catalyzed and microwave-assisted approach for introducing heteroarylamino substituents at position-4 of the quinazoline ring

We report herein a new methodology for synthesizing quinazoline derivatives bearing a heteroarylamino moiety at position-4 of the quinazoline ring. As an alternative to the Buchwald–Hartwig cross-coupling reaction, which appears, until now, as the only efficient way to react 4-chloroquinazolines with numerous amino nitrogen-containing heterocycles displaying poor nucleophilicity, we developed a DMAP-catalyzed reaction involving microwave irradiation. Optimization of the reaction conditions led to the use of 30 mol % of DMAP in toluene, using a monomode microwave reactor and sealed vials. Moreover, the S_NAr reaction intermediate salt was isolated and fully characterized. Finally, the procedure was extended to two different 2-substituted-quinazoline series and also to various anilines, demonstrating that this approach was a general efficient way to access to such 4-substituted quinazoline scaffolds of high pharmaceutical interest.     

Quantitative characterization by asymmetrical flow field-flow fractionation of IgG thermal aggregation with and without polymer protective agents

Complexes formed between poly(acrylates) and polyclonal immunoglobulin G (IgG) in its native conformation and after heat stress were characterized using asymmetric flow field-flow fractionation (AF4) coupled with on-line UV-Vis spectroscopy and multi-angle light-scattering detection (MALS). Mixtures of IgG and poly(acrylates) of increasing structural complexity, sodium poly(acrylate) (PAA), a sodium poly(acrylate) bearing at random 3 mol % n-octadecyl groups, and a random copolymer of sodium acrylate (35 mol %), N-n-octylacrylamide (25 mol %) and N-isopropylacrylamide (40 mol %), were fractionated in a sodium phosphate buffer (0.02 M, pH 6.8) in the presence, or not, of 0.1 M NaCl. The AF4 protocol developed allowed the fractionation of solutions containing free poly(acrylates), native IgG monomer and dimer, poly(acrylates)/IgG complexes made up of one IgG molecule and a few polymer chains, and/or larger poly(acrylates)/IgG aggregates. The molar mass and recovery of the soluble analytes were obtained for mixed solutions of poly(acrylates) and native IgG and for the same solutions incubated at 65 °C for 10 min. From the combined AF4 results, we concluded that in solutions of low ionic strength, the presence of PAA increased the recovery ratio of IgG after thermal stress because of the formation of electrostatically-driven PAA/IgG complexes, but PAA had no protective effect in the presence of 0.1 M NaCl. Poly(acrylates) bearing hydrophobic groups significantly increased IgG recovery after stress, independently of NaCl concentration, because of the synergistic effect of hydrophobic and electrostatic interactions. The AF4 results corroborate conclusions drawn from a previous study combining four analytical techniques. This study demonstrates that AF4 is an efficient tool for the analysis of protein formulations subjected to stress, an important achievement given the anticipated important role of proteins in near-future human therapies. ?      

Carbon‐Coated LiTi2(PO4)3: An Ideal Insertion Host for Lithium‐Ion and Sodium‐Ion Batteries

We report the extraordinary performance of carbon‐coated sodium super ion conductor (NASICON)‐type LiTi₂(PO₄)₃ as an ideal host matrix for reversible insertion of both Li and Na ions. The NASICON‐type compound was prepared by means of a Pechini‐type polymerizable complex method and was subsequently carbon coated. Several characterization techniques such as XRD, thermogravimetric analysis (TGA), field‐emission (FE) SEM, TEM, and Raman analysis were used to study the physicochemical properties. Both guest species underwent a two‐phase insertion mechanism during the charge/discharge process that was clearly evidenced from galvanostatic and cyclic voltammetric studies. Unlike that of Li (≈1.5 moles of Li), Na insertion exhibits better reversibility (≈1.59 moles of Na) while experiencing a slightly higher capacity fade (≈8 % higher than Li) and polarization (780 mV) than Li. However, excellent rate capability profiles were noted for Na insertion relative to its counterpart Li. Overall, the Na insertion properties were found to be superior relative to Li insertion, which makes carbon‐coated NASICON‐type LiTi₂(PO₄)₃ hosts attractive for the development of next‐generation batteries.     

Structure of the calcium pyrophosphate monohydrate phase (Ca2P2O7·H2O): towards understanding the dehydration process in calcium pyrophosphate hydrates

Calcium pyrophosphate hydrate (CPP, Ca₂P₂O₇·nH₂O) and calcium orthophosphate compounds (including apatite, octacalcium phosphate etc.) are among the most prevalent pathological calcifications in joints. Even though only two dihydrated forms of CPP (CPPD) have been detected in vivo (monoclinic and triclinic CPPD), investigations of other hydrated forms such as tetrahydrated or amorphous CPP are relevant to a further understanding of the physicochemistry of those phases of biological interest. The synthesis of single crystals of calcium pyrophosphate monohydrate (CPPM; Ca₂P₂O₇·H₂O) by diffusion in silica gel at ambient temperature and the structural analysis of this phase are reported in this paper. Complementarily, data from synchrotron X‐ray diffraction on a CPPM powder sample have been fitted to the crystal parameters. Finally, the relationship between the resolved structure for the CPPM phase and the structure of the tetrahydrated calcium pyrophosphate β phase (CPPT‐β) is discussed.     

Electrochemical interfaces on chalcogenides: Some structural perspectives and synergistic effects of single-surface active sites

The use of single-atom metals (SAM) as catalysts of energy conversion reactions is a recent topic, which has gained popularity in the last two decades. Transition metal dichalcogenides emerged as important electrocatalysts since it was discovered that their chalcogenide edge sites are active towards the electrocatalytic hydrogen evolution reaction (HER) and could also serve as supports for other metals within the same applications. Currently, several groups have reported a novel metal?chalcogenide arrangement, with the possibility of isolating metals at specific sites on chalcogenides to enhance their properties resulting in a synergistic effect in which both chalcogenide and single-atom metal features are exploited, either as promoters or active sites. Theoretical studies have been the basis of these reports.     

The influence of nitrogen-15 proton-driven spin diffusion on the measurement of nitrogen-15 longitudinal relaxation times

The effect of nitrogen-15 proton-driven spin diffusion on quantitative (15)N T(1) measurements in solid proteins is investigated, and the impact on the measurement of dynamic parameters is assessed. A simple model of exchange between neighboring nitrogens is used to reproduce the evolution of (15)N spin systems whose longitudinal relaxation rates and exchange rates are compatible with experimental measurements. We show that the induced error in the measured T(1) and its effect on the determination of dynamics parameters is likely to be less than the current experimental error. The use of deuterated protein samples is shown to have a small but sometimes visible effect, and may also considerably slow down or even suppress the exchange of magnetization due to spin diffusion.     

Active mode locking of continuous-wave doubly and singly resonant optical parametric oscillators

We report on what we believe to be the first active mode locking of near-degenerate, doubly and singly resonant cw-pumped optical parametric oscillators (OPOs). We show experimentally that a steady-state regime of short pulses is reached in a few tens of microseconds under cw pumping. The oscillation buildup dynamics of both OPOs is also explored, evidencing an unusual transient behavior in the mode-locking process.     

Evaluation of ion mobility in capillary electrophoresis coupled to mass spectrometry for the identification in metabolomics

Currently, feature annotation remains one of the main challenges in untargeted metabolomics. In this context, the information provided by high-resolution mass spectrometry (HRMS) in addition to accurate mass can improve the quality of metabolite annotation, and MS/MS fragmentation patterns are widely used. Accurate mass and a separation index, such as retention time or effective mobility (μ_eff), in chromatographic and electrophoretic approaches, respectively, must be used for unequivocal metabolite identification. The possibility of measuring collision cross-section (CCS) values by using ion mobility (IM) is becoming increasingly popular in metabolomic studies thanks to the new generation of IM mass spectrometers. Based on their similar separation mechanisms involving electric field and the size of the compounds, the complementarity of ^DTCCS_N2 and μ_eff needs to be evaluated. In this study, a comparison of ^DTCCS_N2 and μ_eff was achieved in the context of feature identification ability in untargeted metabolomics by capillary zone electrophoresis (CZE) coupled with HRMS. This study confirms the high correlation of ^DTCCS_N2 with the mass of the studied metabolites as well as the orthogonality between accurate mass and μ_eff, making this combination particularly interesting for the identification of several endogenous metabolites. The use of IM-MS remains of great interest for facilitating the annotation of neutral metabolites present in the electroosmotic flow (EOF) that are poorly or not separated by CZE.     

Protected Amine Labels: A Versatile Molecular Scaffold for Multiplexed Nominal Mass and Sub-Da Isotopologue Quantitative Proteomic Reagents

We assemble a versatile molecular scaffold from simple building blocks to create binary and multiplexed stable isotope reagents for quantitative mass spectrometry. Termed Protected Amine Labels (PAL), these reagents offer multiple analytical figures of merit including, (1) robust targeting of peptide N-termini and lysyl side chains, (2) optimal mass spectrometry ionization efficiency through regeneration of primary amines on labeled peptides, (3) an amino acid-based mass tag that incorporates heavy isotopes of carbon, nitrogen, and oxygen to ensure matched physicochemical and MS/MS fragmentation behavior among labeled peptides, and (4) a molecularly efficient architecture, in which the majority of hetero-atom centers can be used to synthesize a variety of nominal mass and sub-Da isotopologue stable isotope reagents. We demonstrate the performance of these reagents in well-established strategies whereby up to four channels of peptide isotopomers, each separated by 4 Da, are quantified in MS-level scans with accuracies comparable to current commercial reagents. In addition, we utilize the PAL scaffold to create isotopologue reagents in which labeled peptide analogs differ in mass based on the binding energy in carbon and nitrogen nuclei, thereby allowing quantification based on MS or MS/MS spectra. We demonstrate accurate quantification for reagents that support 6-plex labeling and propose extension of this scheme to 9-channels based on a similar PAL scaffold. Finally, we provide exemplar data that extend the application of isotopologe-based quantification reagents to medium resolution, quadrupole time-of-flight mass spectrometers.