Terpyridine-Functionalized Calixarenes: Synthesis,Characterization and Anion Sensing Applications

Lanthanide complexes have been developed and are reported herein. These complexes were derived from a terpyridine-functionalized calix[4]arene ligand, chelated with Tb³⁺ and Eu³⁺. Synthesis of these complexes was achieved in two steps from a calix[4]arene derivative: (1) amide coupling of a calix[4]arene bearing carboxylic acid functionalities and (2) metallation with a lanthanide triflate salt. The ligand and its complexes were characterized by NMR (¹H and ¹³C), fluorescence and UV-vis spectroscopy as well as MS. The photophysical properties of these complexes were studied; high molar absorptivity values, modest quantum yields and luminescence lifetimes on the ms timescale were obtained. Anion binding results in a change in the photophysical properties of the complexes. The anion sensing ability of the Tb(III) complex was evaluated via visual detection, UV-vis and fluorescence studies. The sensor was found to be responsive towards a variety of anions, and large binding constants were obtained for the coordination of anions to the sensor.     

A Metabolomic Approach to Beer Characterization

The consumers’ interest towards beer consumption has been on the rise during the past decade: new approaches and ingredients get tested, expanding the traditional recipe for brewing beer. As a consequence, the field of “beeromics” has also been constantly growing, as well as the demand for quick and exhaustive analytical methods. In this study, we propose a combination of nuclear magnetic resonance (NMR) spectroscopy and chemometrics to characterize beer. ¹H-NMR spectra were collected and then analyzed using chemometric tools. An interval-based approach was applied to extract chemical features from the spectra to build a dataset of resolved relative concentrations. One aim of this work was to compare the results obtained using the full spectrum and the resolved approach: with a reasonable amount of time needed to obtain the resolved dataset, we show that the resolved information is comparable with the full spectrum information, but interpretability is greatly improved.     

Electroanalytical sensors for nonconducting media based on electrodes supported on perfluorinated ion-exchange membranes

Electroanalytical sensors, suitable for the analysis and monitoring of electroactive analytes present in gaseous phase or low-conductive liquid media, and based on electrodes in close contact with perfluorinated ion-exchange polymers are reviewed. The basic operative mechanism of these sensors, in which ion-exchange polymers act as solid polymer electrolytes (SPE's), is thoroughly discussed, while stressing the fundamental reasons why their behavior differs from that of conventional membrane electrodes. The procedures for preparing composite working electrodes by coating one side of ion-exchange membranes with stable porous films of conductive materials are described, along with the most common strategies followed to assemble this type of sensors. Useful examples of measurements in electrolyte-free media of inorganic and organic electroactive species of interest mainly for environmental analysis are given. Future prospects for the development of these sensors are also discussed.     

Tailoring the Thermal Conductivity of Rubber Nanocomposites by Inorganic Systems: Opportunities and Challenges for Their Application in Tires Formulation

The development of effective thermally conductive rubber nanocomposites for heat management represents a tricky point for several modern technologies, ranging from electronic devices to the tire industry. Since rubber materials generally exhibit poor thermal transfer, the addition of high loadings of different carbon-based or inorganic thermally conductive fillers is mandatory to achieve satisfactory heat dissipation performance. However, this dramatically alters the mechanical behavior of the final materials, representing a real limitation to their application. Moreover, upon fillers’ incorporation into the polymer matrix, interfacial thermal resistance arises due to differences between the phonon spectra and scattering at the hybrid interface between the phases. Thus, a suitable filler functionalization is required to avoid discontinuities in the thermal transfer. In this challenging scenario, the present review aims at summarizing the most recent efforts to improve the thermal conductivity of rubber nanocomposites by exploiting, in particular, inorganic and hybrid filler systems, focusing on those that may guarantee a viable transfer of lab-scale formulations to technological applicable solutions. The intrinsic relationship among the filler’s loading, structure, morphology, and interfacial features and the heat transfer in the rubber matrix will be explored in depth, with the ambition of providing some methodological tools for a more profitable design of thermally conductive rubber nanocomposites, especially those for the formulation of tires.     

The Anthelmintic Quassinoids Ailanthone and Bruceine a Induce Infertility in the Model Organism Caenorhabditis elegans by an Apoptosis-like Mechanism Induced in Gonadal and Spermathecal Tissues

In continuation of the search for new anthelmintic natural products, the study at hand investigated the nematicidal effects of the two naturally occurring quassinoids ailanthone and bruceine A against the reproductive system of the model nematode Caenorhabditis elegans to pinpoint their anthelmintic mode of action by the application of various microscopic techniques. Differential Interference Contrast (DIC) and the epifluorescence microscopy experiments used in the presented study indicated the genotoxic effects of the tested quassinoids (c _ailanthone = 50 µM, c _{bruceine A} = 100 µM) against the nuclei of the investigated gonadal and spermathecal tissues, leaving other morphological key features such as enterocytes or body wall muscle cells unimpaired. In order to gain nanoscopic insight into the morphology of the gonads as well as the considerably smaller spermathecae of C. elegans, an innovative protocol of polyethylene glycol embedding, ultra-sectioning, acridine orange staining, tissue identification by epifluorescence, and subsequent AFM-based ultrastructural data acquisition was applied. This sequence allowed the facile and fast assessment of the impact of quassinoid treatment not only on the gonadal but also on the considerably smaller spermathecal tissues of C. elegans. These first-time ultrastructural investigations on C. elegans gonads and spermathecae by AFM led to the identification of specific quassinoid-induced alterations to the nuclei of the reproductive tissues (e.g., highly condensed chromatin, impaired nuclear membrane morphology, as well as altered nucleolus morphology), altogether implying an apoptosis-like effect of ailanthone and bruceine A on the reproductive tissues of C. elegans.     

A Phage Display-Identified Short Peptide Capable of Hydrolyzing Calcium Pyrophosphate Crystals—The Etiological Factor of Chondrocalcinosis

Chondrocalcinosis is a metabolic disease caused by the presence of calcium pyrophosphate dihydrate crystals in the synovial fluid. The goal of our endeavor was to find out whether short peptides could be used as a dissolving factor for such crystals. In order to identify peptides able to dissolve crystals of calcium pyrophosphate, we screened through a random library of peptides using a phage display. The first screening was designed to select phages able to bind the acidic part of alendronic acid (pyrophosphate analog). The second was a catalytic assay in the presence of crystals. The best-performing peptides were subsequently chemically synthesized and rechecked for catalytic properties. One peptide, named R25, turned out to possess some hydrolytic activity toward crystals. Its catalysis is Mg²⁺-dependent and also works against soluble species of pyrophosphate.     

A Practical Approach for the In Vitro Safety and Efficacy Assessment of an Anti-Ageing Cosmetic Cream Enriched with Functional Compounds

(1) Background: Cosmeceuticals are topical products applied to human skin to prevent skin ageing and maintain a healthy skin appearance. Their effectiveness is closely linked to the compounds present in a final formulation. In this article, we propose a panel of in vitro tests to support the efficacy assessment of an anti-ageing cream enriched with functional compounds. (2) Methods: biocompatibility and the irritant effect were evaluated on reconstructed human epidermis (RHE) and corneal epithelium (HCE) 3D models. After a preliminary MTT assay, normal human dermal fibroblasts (NHDF) and keratinocytes (HaCaT) were used to evaluate the extracellular matrix (ECM) protein synthesis, and interleukin-6 (IL-6) and metalloproteinase-1 (MMP-1) production. (3) Results: data collected showed good biocompatibility and demonstrated the absence of the irritant effect in both 3D models. Therefore, we demonstrated a statistical increase in collagen and elastin productions in NHDF cells. In HaCaT cells, we highlighted an anti-inflammatory effect through a reduction in IL-6 levels in inflammatory stimulated conditions. Moreover, the reduction of MMP-1 production after UV-B radiation was demonstrated, showing significant photo-protection. (4) Conclusion: a multiple in vitro assays approach is proposed for the valid and practical assessment of the anti-ageing protection, anti-inflammatory and biocompatible claims that can be assigned to a cosmetic product containing functional compounds.     

Fermentation of a skim milk concentrate with Streptococcus thermophilus and chymosin: structure, viscoelasticity and syneresis of gels

Fermentation of a reconstituted skim milk concentrate (8% protein) was investigated to elucidate the effects of various fermentation parameters on the structural, rheological and visual (wheying-off) properties of the resulting gels (pH 4.60). Fermentation trials were performed with non-exocellular polysaccharide-producing strains of Streptococcus thermophilus at various fermentation temperatures and at various chymosin levels. Oscillatory vane rheometry carried out on the intact gels (at 4 °C) showed that the level of chymosin had a significant impact on the gel strength (storage modulus G′). This can be explained by the arrangement of casein micelles into more compact aggregates and the enhanced fusion of aggregated casein micelles as revealed by transmission electron microscopy for the gels fermented with chymosin. Wheying-off of the stirred gels as measured by a centrifugation test (at 4 °C) and pore size of the intact gel structures investigated by scanning electron microscopy both increased with increasing level of chymosin and increasing fermentation temperature (resulting in an increase in acidification rate). A higher level of syneresis (wheying-off) is explained by the larger pore size, since larger pores present a lower resistance to the outflow of whey from the gel.     

Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.