Stimulus‐responsive polymers based on 2‐hydroxypropyl acrylate prepared by RAFT polymerization

Homopolymerization and diblock copolymerization of 2‐hydroxypropyl acrylate (HPA) has been conducted using reversible addition fragmentation chain transfer (RAFT) chemistry in tert‐butanol at 80 °C. PHPA homopolymers were obtained with high conversions and narrow molecular weight distributions over a wide range of target degrees of polymerization. Like its poly(2‐hydroxyethyl methacrylate) isomer, PHPA homopolymer exhibits inverse temperature solubility in dilute aqueous solution, with cloud points increasing systematically on lowering the mean chain length. The nature of the end groups is shown to significantly affect the cloud point, whereas no effect of concentration was observed over the PHPA concentration range investigated. Various thermoresponsive PHPA‐based diblock copolymers were prepared via one‐pot syntheses in which the second block was either permanently hydrophilic or pH‐responsive. Preliminary studies confirmed that poly(ethylene oxide)‐poly(2‐hydroxypropyl acrylate) (PEO₄₅‐PHPA₄₈) and poly(2‐hydroxypropyl acrylate)‐ poly(2‐hydroxyethyl acrylate) (PHPA₄₉‐PHEA₆₈)diblock copolymers formed well‐defined PHPA‐core micelles in 10 mM sodium nitrate solution at 40 °C and 70 °C with mean hydrodynamic diameters of 20 nm and 35 nm, respectively. In contrast, most other PHPA‐based diblock copolymers investigated formed larger colloidal aggregates in 10 mM NaNO₃ solution at elevated temperatures. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2032–2043, 2010     

Spot overlapping in two-dimensional polyacrylamide gel electrophoresis separations: a statistical study of complex protein maps

A statistical approach able to extract the information contained in a two-dimenisional polyacrylamide gel electrophoresis (2-D PAGE) separation is here reported. The method is based on the quantitative theory of peak overlapping, a procedure previously developed by the authors and here extended to 2-D separations. The whole map is divided into many strips in order to obtain 1-D separations on which the statistic procedure is applied: the developed algorithms, on the basis of spot experimental data (intensity and spatial coordinates) permit to estimate the intrinsic number of components and to single out the specific order present in spot positions. The procedure was validated on computer-simulated maps. Its applicability to real samples was tested on maps obtained from literature sources. The following important information on protein mixtures can be extracted: (i) the number of proteins can be accurately estimated, on the basis of the spatial coordinates and intensities of spots detected in the 2-D PAGE map; (ii) the model describing distribution of interdistance between adjacent spots can be identified in both the separation dimensions; (iii) the presence of repeated interdistances in spot positions in the maps can be easily singled out: these regularities suggest specific protein modifications.     

Spatially resolved (semi)quantitative determination of iron (Fe) in plants by means of synchrotron micro X-ray fluorescence

Iron (Fe) is an essential element for plant growth and development; hence determining Fe distribution and concentration inside plant organs at the microscopic level is of great relevance to better understand its metabolism and bioavailability through the food chain. Among the available microanalytical techniques, synchrotron μ-XRF methods can provide a powerful and versatile array of analytical tools to study Fe distribution within plant samples. In the last years, the implementation of new algorithms and detection technologies has opened the way to more accurate (semi)quantitative analyses of complex matrices like plant materials. In this paper, for the first time the distribution of Fe within tomato roots has been imaged and quantified by means of confocal μ-XRF and exploiting a recently developed fundamental parameter-based algorithm. With this approach, Fe concentrations ranging from few hundreds of ppb to several hundreds of ppm can be determined at the microscopic level without cutting sections. Furthermore, Fe (semi)quantitative distribution maps were obtained for the first time by using two opposing detectors to collect simultaneously the XRF radiation emerging from both sides of an intact cucumber leaf.

Discovery of the archaeal chemical link between glycogen (starch) synthase families using a new mass spectrometry assay

Starch and its analogue glycogen are biosynthesized by enzymes that have been classified by sequence similarities into two families that have no significant sequence overlap: the animal/fungal glycogen synthases and the plant/bacterial glycogen (starch) synthases. Recent gene sequence analysis of putative archaea enzymes implicates them as a third family that links the structural and functional features of the other two classes. Herein, we present the first rapid electrospray ionization mass spectrometry-based assay to quantify any carbohydrate-polymerizing activity, the first cloning and recombinant expression as well as verification of the putative function of a glycogen synthase from the hyperthermophilic archaea Pyrococcus furiosus, and the characterization of a variety of glycogen synthases with the new assay. The new assay allowed the determination of Km and Vmax values for the rabbit, yeast, and P. furiosus glycogen synthases. Most surprisingly, unlike the synthases from rabbit or yeast and in contradiction to what would be expected from structural studies of other nucleotide-sugar binding proteins, the synthase from the archaea source accepts both uridine- and adenine-diphosphate activated glucose competitively and with comparable affinities to form a glucose polymer. This loose substrate specificity implicates this protein as the chemical link between the two branches of glycogen synthases that have evolved to accept primarily one or the other nucleotide as well as a good source enzyme for polymer bioengineering efforts.     

IR spectra of C2H5(+)-N2 isomers: evidence for dative chemical bonding in the isolated ethanediazonium ion

The potential energy surface (PES) of C(2)H(5)(+)-N(2) is characterized in detail by infrared photodissociation (IRPD) spectroscopy of mass-selected ions in a quadrupole tandem mass spectrometer and ab initio calculations at the MP2/6-311G(2df,2pd) level. The PES features three nonequivalent minima. Two local minima, 1-N(2)(H) and 1-N(2)(C), are adduct complexes with binding energies of D(0) = 18 and 12 kJ/mol, in which the N(2) ligand is weakly bonded by electrostatic forces to either the acidic proton or the electrophilic carbon atom of the nonclassical C(2)H(5)(+) ion (1), respectively. The global minimum 3 is the ethanediazonium ion, featuring a weak dative bond of D(0) = 38 kJ/mol. This interaction strength is sufficient to switch the C(2)H(5)(+) structure from nonclassical to classical. The 1-N(2)(C) isomer corresponds to the entrance channel complex for addition of N(2) to 1 yielding the product 3. This reaction involves a small barrier of 7 kJ/mol as a result of the rearrangement of the C(2)H(5)(+) ion. The partly rotationally resolved IRPD spectrum of C(2)H(5)(+)-N(2) recorded in the C-H stretch range is dominated by four bands assigned to 3 and one weak transition attributed to 1-N(2)(H). The abundance ratio of 1-N(2)(H) and 3 estimated from the IRPD spectrum as ～1% is consistent with the calculated free energy difference of 12 kJ/mol. As the ethanediazonium ion escaped previous mass spectrometric detection, the currently accepted value for the ethyl cation affinity of N(2) is revised from -ΔH(0) = 15.5 ± 1.5 to ～42 kJ/mol. The first experimental identification and characterization of 3 provides a sensitive probe of the electrophilic character and fluxionality of the ethyl cation. Comparison of 3 with related alkanediazonium ions reveals the drastic effect of the size of the alkyl chain on their chemical reactivity, which is relevant in the context of hydrocarbon plasma chemistry of planetary atmospheres and the interstellar medium, as well as alkylation reactions of (bio)organic molecules (e.g., carcinogenesis and mutagenesis of DNA material).     

Synthesis and polymerisation of lipophilic peptide nucleic acids derived from stearic acid and pentacosa-10,12-diynoic acid

The adenine, cytosine and thymine peptide nucleic acid (PNA) monomers and PNA T₁₀ oligomers bearing either a diacetylenic or stearoyl moiety at the N- or C-terminus have been successfully prepared. The resulting thymine monomeric and T₁₀-mer derivatives have been subsequently incorporated into polydiacetylene-containing liposomes.     

Synthesis of isobutyl-C-galactoside (IBCG) as an isopropylthiogalactoside (IPTG) substitute for increased induction of protein expression

[reaction: see text] Addition of isopropyl-beta-d-thiogalactopyranoside (IPTG) to bacterial cultures is often used to induce expression of plasmid-based genes for the production of recombinant proteins under control of the lac promoter, but a simple method to circumvent the inherent instability of this compound has not been addressed experimentally. Herein we report the first synthesis of isobutyl-C-galactoside (IBCG), the C-glycoside analogue of IPTG, and show that IBCG is superior to IPTG in inducing protein expression over long induction times.     

Efficient synthesis of sulfonic,phosphoric, and phosphinic esters employing alkylating polymer-bound reagents

The efficient esterification of various sulfonic acids and sulfonates using polymer-bound triazenes based on the triazene T2 linker is described. Esterification of enantiopure alpha-substituted sodium sulfonates was performed in the presence of an alkylating resin without racemization. Racemization is a serious drawback in the esterification route via sulfonyl chlorides because of intermediate sulfene formation. To demonstrate the versatility of this protocol, phosphoric and phosphinic acids have been converted into the corresponding esters as well. All products were obtained in good yield and excellent purities without any further purification steps.     

A complete family of isostructural cluster compounds with cubane-like M(3)S(4)M' cores (M = Mo,W; M' = Ni,Pd, Pt): comparative crystallography and electrochemistry

By reaction of the geometrically incomplete cubane-like clusters [(eta(5)-Cp')(3)Mo(3)S(4))][pts] and [(eta(5)-Cp')(3)W(3)S(4)][pts] (Cp' = methylcyclopentadienyl; pts = p-toluenesulfonate) with group 10 alkene complexes, three new heterobimetallic clusters with cubane-like cluster cores were isolated: [(eta(5)-Cp')(3)W(3)S(4)M'(PPh(3))][pts] ([5][pts], M' = Pd; [6][pts], M' = Pt); [(eta(5)-Cp')(3)Mo(3)S(4)Ni(AsPh(3))][pts] ([7][pts]). The compounds [5][pts]-[7][pts] are completing the extensive series of clusters [(eta(5)-Cp')(3)M(3)S(4)M'(EPh(3))][pts] (M = Mo, W; M' = Ni, Pd, Pt; E = P, As) which allows the consequences of replacing a single type of atom on structural and NMR and UV/vis spectroscopic as well as electrochemical properties to be determined. Single-crystal X-ray structure determinations of [5][pts]-[7][pts] revealed that [5][pts] was not isomorphous to the other members of the series [(eta(5)-Cp')(3)M(3)S(4)M'(EPh(3))][pts] due to distinctly different cell parameters, which in the molecular structure of [5](+) is reflected in a slightly different orientation of the PPh(3) ligand. Electrochemical measurements on the series showed that the Mo-based clusters were more difficult to oxidize than their W-based analogues. The Pd-containing clusters underwent two-electron oxidation processes, whereas the Ni- and Pt-containing clusters underwent two separated one-electron oxidation processes.