Dirac's aether in relativistic quantum mechanics

The introduction by Dirac of a new aether model based on a stochastic covariant distribution of subquantum motions (corresponding to a vacuum state alive with fluctuations and randomness) is discussed with respect to the present experimental and theoretical discussion of nonlocality in EPR situations. It is shown (1) that one can deduce the de Broglie waves as real collective Markov processes on the top of Dirac's aether; (2) that the quantum potential associated with this aether's modification, by the presence of EPR photon pairs, yields a relativistic causal action at a distance which interprets the superluminal correlations recently established by Aspect et al.; (3) that the existence of the Einstein-de Broglie photon model (deduced from Dirac's aether) implies experimental predictions which conflict with the Copenhagen interpretation in certain specific testable interference experiments.     

Syntheses and crystal structures of dinuclear complexes containing d-block and f-block luminophores. Sensitization of NIR luminescence from Yb(III), Nd(III), and Er(III) centers by energy transfer from Re(I)- and Pt(II)-bipyrimidine metal centers

Mononuclear complexes [Re(bpym)(CO)(3)Cl] and [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] (bpym = 2,2'-bipyrimidine), in which one of the bipyrimidine sites is vacant, have been used as "complex ligands" to prepare heterodinuclear d-f complexes in which a lanthanide tris(1,3-diketonate) unit is attached to the secondary bipyrimidine site to evaluate the ability of d-block chromophores to act as antennae for causing sensitized near-infrared (NIR) luminescence from adjacent lanthanide(III) centers. The two sets of complexes so prepared are [Re(CO)(3)Cl(mu-bpym)Ln(fod)(3)] (abbreviated as Re-Ln; where Ln = Yb, Nd, Er) and [(F(3)C-C(6)H(4)-CC)(2)Pt(mu-bpym)Ln(hfac)(3)] (abbreviated as Pt-Ln; where Ln = Nd, Gd). Members of both series have been structurally characterized; the metal-metal separation across the bipyrimidine bridge is approximately 6.3 A in each case. In these complexes, the (3)MLCT (MLCT = metal to ligand charge-transfer) luminescences of the mononuclear [Re(bpym)(CO)(3)Cl] and [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] complexes are quenched by energy transfer to those lanthanides (Ln = Yb, Nd, Er) that have low-lying f-f states capable of NIR luminescence; as a result, sensitized NIR luminescence is seen from the lanthanide center following excitation of the d-block unit. In the solid state, quenching of the luminescence from the d-block chromophore is complete, indicating efficient d --> f energy transfer, as a result of the short metal-metal separation across the bipyrimidine bridge. In a CH(2)Cl(2) solution, partial dissociation of the dinuclear complexes into the mononuclear units occurs, with the result that some (3)MLCT luminescence is observed from mononuclear [Re(bpym)(CO)(3)Cl] or [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] present in the equilibrium mixture. Solution UV-vis and luminescence titrations, carried out by the addition of portions of Ln(fod)(3)(H(2)O)(2) or Ln(hfac)(3)(H(2)O)(2) to the d-block complex ligands, indicate that binding of the lanthanide tris(1,3-diketonate) unit at the secondary bipyrimidine site to give the d-f dinuclear complexes occurs with an association constant of ca. 10(5) M(-)(1).     

Sensitivity improvement in 19F NMR-based screening experiments: theoretical considerations and experimental applications

NMR-based binding and functional screening performed with FAXS (fluorine chemical shift anisotropy and exchange for screening) and 3-FABS (three fluorine atoms for biochemical screening) represents a potential alternative approach to high-throughput screening for the identification of novel potential drug candidates. The major limitation of this method in its current status is its intrinsic low sensitivity that limits the number of tested compounds. One approach for overcoming this problem is the use of a cryogenically cooled (19)F probe that reduces the thermal noise in the receiver circuitry. Sensitivity improvement in the two screening techniques achieved with the novel cryogenic (19)F probe technology permits an increased throughput, detection of weaker binders and inhibitors (relevant in a fragment-based lead discovery program), detection of slow binders, and reduction in protein and substrate consumption. These aspects are analyzed with theoretical simulations and experimental quantitative performance evaluation. Application of 3-FABS combined with the cryogenic (19)F probe technology to rapid screening at very low enzyme concentrations and the current detection limits reached with this approach are also presented.     

Electroanalytical sensors for nonconducting media based on electrodes supported on perfluorinated ion-exchange membranes

Electroanalytical sensors, suitable for the analysis and monitoring of electroactive analytes present in gaseous phase or low-conductive liquid media, and based on electrodes in close contact with perfluorinated ion-exchange polymers are reviewed. The basic operative mechanism of these sensors, in which ion-exchange polymers act as solid polymer electrolytes (SPE's), is thoroughly discussed, while stressing the fundamental reasons why their behavior differs from that of conventional membrane electrodes. The procedures for preparing composite working electrodes by coating one side of ion-exchange membranes with stable porous films of conductive materials are described, along with the most common strategies followed to assemble this type of sensors. Useful examples of measurements in electrolyte-free media of inorganic and organic electroactive species of interest mainly for environmental analysis are given. Future prospects for the development of these sensors are also discussed.     

Separation of capsular polysaccharide K4 and defructosylated K4 by high-performance capillary electrophoresis

A rapid, highly sensitive and reproducible high-performance capillary electrophoresis (HPCE) method (electrokinetic chromatography with sodium dodecyl sulfate) is described for the determination of the polysaccharide from the uropathogenic Escherichia coli K4 bacteria (05:K4:H4) and its defructosylated product. The two polyanions, K4 and defructosylated K4, are separated and readily determined within 30 min on an uncoated fused-silica capillary using normal polarity at 20 kV and detection at 200 nm. A linear relationship was found for the two polysaccharides over a wide range of concentrations, from approximately 30 ng (0.5 microg/microL) to 210 ng (3.5 microg/microL). The described method was used to evaluate the defructosylation process of K4 under drastic acid conditions.     

A novel general route for the preparation of enantiopure imidazolines

A novel procedure for the preparation of enantiopure 1,4-disubstituted 2-imidazolines is reported. Enantiopure beta-amino alcohols are converted into N-hydroxyethylamides, which are reacted with excess thionyl chloride, or with thionyl chloride followed by phosphorus pentachloride to yield N-chloroethylimidoyl chlorides. These intermediates are treated with amines and anilines to produce N-chloroethylamidines, which are converted into imidazolines upon workup with aqueous hydroxide. The method is simple and efficient and has been used to prepare a wide variety of enantiopure imidazolines, in a modular fashion, from readily available amino alcohols.     

Determination of the rare earth elements in natural waters by isotope-dilution mass spectrometry

A method is described for the determination of ten rare earth elements (La, Ce, Nd, Sm, Eu, Gd, Dy, Er, Yb, Lu) in natural waters by isotope-dilution mass spectrometry. A 1-l sample is used for sea water, and proportionately less for other natural waters. The rare earth elements are extracted by co-precipitation with hydrated iron (III) oxide and purified on a single cation-exchange column, with hydrochloric and nitric acids as eluents. Final measurements are from a triple Re/ Ta filament in the mass spectrometer, run automatically under computer control. Relative standard deviations are better than 4% for the analysis of standard solutions, with accuracy in the same range. The analytical blank is low ( <0.03 pmol, 4 pg, for Nd) producing a sample/blank concentration ratio greater than 100 for all ten rare earth elements when determined in a 1-l seawater sample. Concentration depth profiles are given for an ocean water and normalised abundance patterns for three natural waters.     

Spot overlapping in two-dimensional polyacrylamide gel electrophoresis separations: a statistical study of complex protein maps

A statistical approach able to extract the information contained in a two-dimenisional polyacrylamide gel electrophoresis (2-D PAGE) separation is here reported. The method is based on the quantitative theory of peak overlapping, a procedure previously developed by the authors and here extended to 2-D separations. The whole map is divided into many strips in order to obtain 1-D separations on which the statistic procedure is applied: the developed algorithms, on the basis of spot experimental data (intensity and spatial coordinates) permit to estimate the intrinsic number of components and to single out the specific order present in spot positions. The procedure was validated on computer-simulated maps. Its applicability to real samples was tested on maps obtained from literature sources. The following important information on protein mixtures can be extracted: (i) the number of proteins can be accurately estimated, on the basis of the spatial coordinates and intensities of spots detected in the 2-D PAGE map; (ii) the model describing distribution of interdistance between adjacent spots can be identified in both the separation dimensions; (iii) the presence of repeated interdistances in spot positions in the maps can be easily singled out: these regularities suggest specific protein modifications.     

Hydrogen-bonded networks in ethanol proton wires: IR spectra of (EtOH)qH+-Ln clusters (L = Ar/N2, q < or = 4, n < or = 5)

Isolated and microsolvated protonated ethanol clusters, (EtOH)qH+-Ln with L = Ar and N2, are characterized by infrared photodissociation (IRPD) spectroscopy in the 3 microm range and quantum chemical calculations. For comparison, also the spectrum of the protonated methanol dimer, (MeOH)2H+, is presented. The IRPD spectra carry the signature of H-bonded (EtOH)qH+ chain structures, in which the excess proton is either strongly localized on one or (nearly) equally shared between two EtOH molecules, corresponding to Eigen-type ion cores (EtOH2+ for q = 1, 3) or Zundel-type ion cores (EtOH-H+-HOEt for q = 2, 4), respectively. In contrast to neutral (EtOH)q clusters, no cyclic (EtOH)qH+ isomers are detected in the size range investigated (q < or = 4), indicative of the substantial impact of the excess proton on the properties of the H-bonded ethanol network. The acidity of the two terminal OH groups in the (EtOH)qH+ chains decreases with the length of the chain (q). Comparison between (ROH)qH+ with R = CH3 and C2H5 shows that the acidity of the terminal O-H groups increases with the length of the aliphatic rest (R). The most stable (EtOH)qH+-Ln clusters with n < or = 2 feature intermolecular H-bonds between the inert ligands and the two available terminal OH groups of the (EtOH)qH+ chain. Asymmetric microsolvation of (EtOH)qH+ with q = 2 and 4 promotes a switch from Zundel-type to Eigen-type cores, demonstrating that the fundamental structural motif of the (EtOH)qH+ proton wire sensitively depends on the environment. The strength of the H-bonds between L and (EtOH)qH+ is shown to provide a rather sensitive probe of the acidity of the terminal OH groups.