Determination of niobium in zirconium-niobium alloys

A rapid control determination of niobium in 50% zirconium/50% niobium master-alloy is described; it is a direct spectrophotometric procedure, based on the reaction of niobium ions with hydrogen peroxide in concentrated sulphuric acid. The procedure is suitable for the examination of zirconium alloys containing niobium in the range 0.1 to about 60%. At least 1% of chromium, cobalt, copper, manganese, nickel or tantalum, does not interfere. Interference due to optical absorption by the peroxy-complexes of titanium, tungsten, molybdenum and vanadium is not significant in the determination of niobium above about 1%, provided that these metals are not in excess of about 0.5%, 0.25%, 0.1% and 0.02%, respectively. To compensate for optical absorption due to iron(III), a solution of the sample, not treated with peroxide, is used.     

Chemiluminescence of CaH and AIH in the reaction of the metal atoms and formaldehyde

Chemiluminescence from the reaction of calcium and aluminum with various hydrogen containing compounds in a flowing gas system and in a heat pipe oven are described. Red chemiluminescence of CaH was observed in the reaction of calcium, and weak chemiluminescence of AlH was seen in the reaction of aluminum with formaldehyde (H₂CO). It is proposed that a reaction between metal atoms and formaldehyde may be used as a source of diatomic metallic hydrides.     

Comparison of experimental and calculated relative sensitivity coefficients for spark-source mass-spectrometry of metals

Sensitivity calibration has been performed for the spark-source mass-spectrometric analysis of iron, copper and aluminium matrices, with standard reference materials. The experimental relative sensitivity coefficients, corrected for discrimination effects in the mass spectrometer, are compared with values obtained with various empirical approaches to calculate relative sensitivity coefficients for an r.f. spark. The best correlation found is only of the order of 50%.     

Targeting cell surface receptors with ligand-conjugated nanocrystals

To explore the potential for use of ligand-conjugated nanocrystals to target cell surface receptors, ion channels, and transporters, we explored the ability of serotonin-labeled CdSe nanocrystals (SNACs) to interact with antidepressant-sensitive, human and Drosophila serotonin transporters (hSERT, dSERT) expressed in HeLa and HEK-293 cells. Unlike unconjugated nanocrystals, SNACs were found to dose-dependently inhibit transport of radiolabeled serotonin by hSERT and dSERT, with an estimated half-maximal activity (EC(50)) of 33 (dSERT) and 99 microM (hSERT). When serotonin was conjugated to the nanocrystal through a linker arm (LSNACs), the EC(50) for hSERT was determined to be 115 microM. Electrophysiology measurements indicated that LSNACs did not elicit currents from the serotonin-3 (5HT(3)) receptor but did produce currents when exposed to the transporter, which are similar to those elicited by antagonists. Moreover, fluorescent LSNACs were found to label SERT-transfected cells but did not label either nontransfected cells or transfected cells coincubated with the high-affinity SERT antagonist paroxetine. These findings support further consideration of ligand-conjugated nanocrystals as versatile probes of membrane proteins in living cells.     

Ruthenium bipyridyl compounds with two terminal alkynyl ligands

Compounds of the form Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)2(X2bipy = 4,4'-X(2)-2,2'-bipyridine, X = Me 3a, Br 3b, I 3c) have been synthesised from the mono-alkynyl precursors Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)Cl (X = Me 2a, Br 2b, I 2c); the former are the first ruthenium bis-alkynyl compounds that also contain a bipyridyl ligand. Spectroelectrochemical investigation of 3a shows that the metal is readily oxidised to form the ruthenium(III) compound 3a+, and will also undergo a single-electron reduction at each nitro group to form 3a2-. ESR and UV/visible spectra of these redox congeners are presented. We also report the synthesis of [Ru(Me2bipy)(PPh3)2(-C triple bond CBut)(N triple bond N)][PF6] during the attempted synthesis of Ru(Me2bipy)(PPh3)2(-C triple bond CBut)2, and report its X-ray crystal structure and IR spectrum. X-Ray crystal structures of 3b and 3c(as two different solvates) are presented, and the nature of the intermolecular interactions seen therein is discussed. Z-Scan measurements on Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, But, Ph, C6H4Me) are also reported, and show that Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, Ph) exhibit moderate third-order non-linearities.     

Cyclic 1,2-dinitrogen compounds through N,N′-di(methoxycarbonyl)hydrazinium intermediates

Acid catalyzed cyclization of methoxymethyl substituted acyclic hydrazides 4 provides cyclic hydrazides 5 in moderate to good yields through the intermediacy of N,N′-di(methoxycarbonyl)hydrazinium intermediates.     

Real-time picosecond measurements of electronic energy transfer from DODCI to malachite green and DQOCI

Singlet-singlet resonance energy transfers from DODCI (donor) to malachite green and to DQOCI in ethanolic solutions have been investigated with a real-time picosecond streak-camera (time-resolution 3–5 ps) operating at a repetition rate of 140 MHz, in synchronism with the pulse train from a mode-locked cw dye laser used as excitation source. Acceptor concentrations from 10^?5 M to 7.5 × 10^?3 M were studied and average R_o values of 45.6 Å for malachite green and 61.8 Å for DQOCI are obtained from the directly measured fluorescence decay curves. Departure from Förster kinetics is seen at the lower acceptor concentrations employed.     

Preparation and structural characterization of a hexanuclear molybdenum (II) cluster containing carboxylate ligands (Bu4N)2[Mo6(μ3-Cl)8(O2CMe)6]

The hexamolybdenum cluster complex [Mo₆(₃-Cl)₈(O₂CMe)₆]^2–, 1 was isolated as the Bu₄N⁺ salt in 71% yield from the reaction of (Bu₄N)₂[Mo₆(₃-Cl)₈Cl₆] with AgO₂CMe in CH₂Cl₂ solvent. The compound was characterized by single crystal X-ray diffraction analysis. The cluster contains an octahedral arrangement of six molybdenum atoms with eight chloride ligands bridging the eight trianglar faces and six carboxylate ligands terminally coordinated through one oxygen atom to each of the six molybdenum atoms. Crystal data: space group =P2₁/n,a=10.713(3)Å,b=14.43(1)Å,c=21.919(4)Å, =94.37(2)°,Z=2, 1965 reflections,R=0.036.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.