Simultaneous determination of estrogenic and androgenic hormones in water by isotope dilution gas chromatography-tandem mass spectrometry

A rapid gas chromatography-tandem mass spectrometry (GC-MS/MS) analytical method was developed for the simultaneous analysis of 7 estrogenic hormones (17α-estradiol, 17β-estradiol, estrone, mestranol, 17α-ethynylestradiol, levonorgestrel, estriol) and 5 androgenic hormones (testosterone, androsterone, etiocholanolone, dihydrotestosterone, androstenedione) in aqueous matrices. This method is unique in its inclusion of all 12 of these estrogens and androgens and is of particular value due to its very short chromatographic run time of 15 min. The use of isotope dilution for all analytes ensures the accurate quantification, accounting for analytical variabilities that may be introduced during sample processing and instrumental analysis. Direct isotopically labelled analogues were used for 8 of the 12 hormones and satisfactory isotope standards were identified for the remaining 4 hormones. Method detection levels (MDLs) were determined to describe analyte concentrations sufficient to provide a signal with 99% certainty of detection. The established MDLs for most analytes were 1-5 ngL(-1) in a variety of aqueous matrices. However, slightly higher MDLs were observed for etiocholanolone, androstenedione, testosterone, levonorgestrel and dihydrotestosterone in some aqueous matrices. Sample matrices were observed to have only a minor impact on MDLs and the method validation confirmed satisfactory method stability over intra-day and inter-day analyses of surface water and tertiary treated effluent samples.     

A microfluidic device for self-synchronised production of droplets

The primary requirement for a mixing operation in droplet-based microfluidic devices is an accurate pairing of droplets of reaction fluids over an extended period of time. In this paper, a novel device for self-synchronous production of droplets has been demonstrated. The device uses a change in impedance across a pair of electrodes introduced due to the passage of a pre-formed droplet to generate a second droplet at a second pair of electrodes. The device was characterised using image analysis. Droplets with a volume of ~23.5 ± 3.1 nl (i.e.~93% of the volume of pre-formed droplets) were produced on applying a voltage of 500 V. The synchronisation efficiency of the device was 83%. As the device enables self-synchronised production of droplets, it has a potential to increase the reliability and robustness of mixing operations in droplet-based microfluidic devices.     

Bis(methyltri‐o‐tolylphosphonium) octaiodide

In the crystal structure of the title compound, 2C₂₂H₂₄P⁺·I₈²⁻, the I₈²⁻ anion is located on a crystallographic inversion centre and consists of two tri‐iodide anions linked by di‐iodine at angles of 89.92 (4)° to form a planar `Z'‐shaped dianion. The octaiodides are linked via long‐range interactions [3.877 (11) Å] into infinite polyiodide ribbons. This is the first example of a structure containing an [(o‐tolyl)₃PMe]⁺ cation, and the C_Me—P—C—C_Me torsion angles of −54.0 (11), −51.3 (11) and −48.2 (11)° indicate that the configuration is exo₃.     

Categories of models of R-mingle

We give a new Esakia-style duality for the category of Sugihara monoids based on the Davey-Werner natural duality for lattices with involution, and use this duality to greatly simplify a construction due to Galatos-Raftery of Sugihara monoids from certain enrichments of their negative cones. Our method of obtaining this simplification is to transport the functors of the Galatos-Raftery construction across our duality, obtaining a vastly more transparent presentation on duals. Because our duality extends Dunn's relational semantics for the logic R-mingle to a categorical equivalence, this also explains the Dunn semantics and its relationship with the more usual Routley-Meyer semantics for relevant logics.     

Characterization of silicon nanowires grown on silicon, stainless steel and indium tin oxide substrates

Silicon nanowires (SiNWs) have been grown on crystalline silicon (Si), indium tin oxide (ITO) and stainless steel (SS) substrates using a gold catalyst coating with a thickness of 200 nm via pulsed plasma-enhanced chemical vapor deposition (PPECVD). Their morphological, mineralogical and surface characteristics have been investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman analysis. SiNWs growth is accompanied by oxidation, thus yielding partially (SiO _x ) and fully oxidized (SiO₂) Si sheaths. The mean diameters of these SiNWs range from 140 to 185 nm. Si with (111) and (220) planes exists in SiNWs grown on all three substrates while Si with a (311) plane is detected only for Si and ITO substrates. Computational simulation using density functional theory (DFT) has also been conducted to supplement the experimental Raman analyses for crystalline Si and SiO₂. XPS results reveal that ca. 30 % of the SiNWs have been oxidized for all substrates. The results presented in this paper can be used to aid selection of appropriate substrates for SiNW growth, depending on specific applications.     

A multianalytical approach to investigate stone biodeterioration at a UNESCO world heritage site: the volcanic rock-hewn churches of Lalibela, Northern Ethiopia

A multianalytical approach combining Optical Microscopy (OM), Backscattered Variable Pressure Scanning Electron Microscopy + Energy Dispersive X-ray Spectroscopy (VP-BSEM + EDS), Powder X-ray Diffractometry (PXRD), Raman Spectroscopy, and Microbiological techniques has been applied to characterize decay products and processes occurring at the surface of two rock-hewn churches (Bete Gyorgis and Bete Amanuel) at the UNESCO’s World Heritage site of Lalibela, Northern Ethiopia. The two churches were carved into volcanic scoria deposits of basaltic composition. In their geological history, the Lalibela volcanic rocks underwent late to post-magmatic hydrothermal alteration together with partial laterization and are therefore characterized by a decay-prone highly vesicular microtexture with late stage to post-magmatic precipitation of secondary mineral phases (calcite–zeolite–smectite). The main objective of the study was to gain a better insight into the weathering products and mechanisms affecting the surface of the stone monuments and to assess the relative contribution of natural “geological” weathering processes versus biological/salt attack in stone decay at this unique heritage site. Results indicate that while the main cause of bulk rock deterioration and structural failure could be related to the stone inherited “geological” features, biological attack by micro- (bacteria) and/or macro- (lichens) organisms is currently responsible for severe stone surface physical and chemical weathering leading to significant weakening of the stone texture and to material loss at the surface of the churches walls. A prompt and careful removal of the biological patinas with the correct biocidal treatment is therefore recommended.     

Sonochemistry II.—Effects of ultrasounds on homogeneous chemical reactions and in environmental detoxification

Sonication of aqueous solutions causes cavitation in the liquid which results in the formation of H· and ·OH radical species that can be used to reduce or oxidize certain chemical compounds. This article focuses on the effect of ultrasounds in homogeneous reactions to examine the type of chemistry that ensues. It also deals with a rather novel method of using ultrasounds in combination with photochemical methods of inducing chemical reactions; this sonophotochemical technique remains to be explored and exploited. Finally, we examine and explore the potential utilization of ultrasounds to convert environmental hazardous substances into more benign substrates, or better still to mineralize organics into carbon dioxide.     

N -Fold ?ech Derived Functors and Generalised Hopf Type Formulas

The notion of n-fold Čech derived functors is introduced and studied. This is illustrated using the n-fold Čech derived functors of the nilization functors Z_k. This gives a new purely algebraic method for the investigation of the Brown–Ellis generalised Hopf formula for the higher integral group homology and for its further generalisation. The paper ends with an application to algebraic K-theory. (Received: December 2004)     

The coarse Baum–Connes conjecture via coarse geometry

The C₀ coarse structure on a metric space is a refinement of the bounded structure and is closely related to the topology of the space. In this paper we will prove the C₀ version of the coarse Baum–Connes conjecture and show that K_*(C^*X₀) is a topological invariant for a broad class of metric spaces. Using this result we construct a ‘geometric’ obstruction group to the coarse Baum–Connes conjecture for the bounded coarse structure. We then show under the assumption of finite asymptotic dimension that the obstructions vanish, and hence we obtain a new proof of the coarse Baum–Connes conjecture in this context.