Solid-phase synthesis of 1-substituted tetrahydroisoquinoline derivatives employing BOC-protected tetrahydroisoquinoline carboxylic acids

Compounds containing the tetrahydroisoquinoline ring system were prepared using solid-supported ester derivatives on a nucleophile-sensitive resin, starting from the corresponding BOC-protected amino acids. The key heterocyclic intermediates were obtained from the Pictet-Spengler reaction between ethyl glyoxylate or methyl 4-formylbenzoate and dopamine or 3-hydroxyphenethylamine. After the resulting amino esters were converted to the BOC derivatives, the phenolic hydroxyl groups were alkylated with a series of alkyl halides to afford the corresponding ethers. Ester hydrolysis afforded the BOC-protected tetrahydroisoquinoline carboxylic acid scaffolds, which were then attached to (4-hydroxyphenyl)sulfide resin (Marshall linker) as the corresponding ester. The BOC group was removed under acidic conditions, and the resulting support-bound amine hydrochlorides were converted to the corresponding amides using a set of carboxylic acids. The support-bound amides were liberated with amines to produce the desired tetrahydroisoquinoline carboxamides. Optimization of the resin loading conditions is described in addition to the identification of impurities observed during the development of the optimum conditions for solid-phase synthesis.     

Excess proton solvation and delocalization in a hydrophilic pocket of the proton conducting polymer membrane nafion

Solvation properties of the hydrated excess proton are studied in a hydrophilic pocket of Nafion 117 through a series of molecular dynamics simulations. The multistate empirical valence bond (MS-EVB) methodology, which enables the delocalization of the excess proton through the Grotthuss hopping mechanism, was employed for one of the excess protons in the simulation cell. Simulations were performed such that "classical" nondissociable hydronium cations and a single excess proton treated with the MS-EVB methodology were at a concentration ratio of 39:1. Two degrees of hydration of the Nafion polymer electrolyte membrane were simulated, each displaying the same marked difference between the solvation structures of the classical versus MS-EVB treated (Grotthuss shuttling) excess proton species. These differences are attributed to the solvent dynamics needed to transfer the cation between the solvent separated and contact pair positions about the sulfonic acid counterion. The results demonstrate that it is generally impossible to describe the low pH conditions in the hydrophilic domains of Nafion without the explicit treatment of Grotthuss delocalization in the underlying molecular dynamics model for the excess protons.     

Synthesis and molecular structure of [Rh3(μ-PPh2)3(CO)6(PPh2-H)], an unusual six-membered inorganic ring complex

Reaction of [{Rh(μ-Cl)(CO)₂}₂] with PPh₂H in CO-saturated ethanol yields [Rh₃(μ-PPh₂)₃ (CO)₆ (PPh₂H)], a red trinuclear cluster of rhodium containing a near-planar six-membered Rh₃P₃ ring; this compound reversibly undergoes elimination of CO and PPh₂H to afford [Rh₃(μ-PPh₂)₃(CO)₅].     

Light Dose and Time Dependency of Photodynamic Cell Membrane Damage

We have investigated the light dose and time dependency of photodynamic cell membrane damage using electrophysiological methods. This study controls the level of cell membrane damage by precisely administration of the light dose. The photosensitizer used was 5′,5″-bis(aminomethyl)-2,2′:5′,2″-terthiophene dihydrochloride (BAT). A confocal laser scanning microscope was used to provide rapid light activation (<1 s) and the subsequent membrane damage was monitored using standard patch clamp techniques. In the presence of 49 μM BAT, light levels less than 0.94 J/cm² led to a reversible depolarization (20 mV) and reduction of resistance (10%) within 3 s of illumination. Higher intensities of illumination (1.57 J/cm²) caused a complete and irreversible loss of membrane potential and cell membrane resistance within 8 s of illumination. The threshold dose of light required to induce cell death by illumination in the presence of BAT was increased in the presence of the antioxidant Trolox-C.     

Products of cytochrome P450(BioI) (CYP107H1)-catalyzed oxidation of fatty acids

[reaction: see text] Oxidation of tetradecanoic and hexadecanoic acids by cytochrome P450(BioI) (CYP107H1) produces mainly the 11-, 12-, and 13-hydroxy C(14) fatty acids and the 11- to 15-hydroxy C(16) fatty acids, respectively. In contrast to previous reports, terminal hydroxylation is not observed. The enantiospecificity of fatty acid hydroxylation by P450(BioI) was also determined, and the enzyme was shown to be moderately selective for production of the (R)-alcohols.     

Complexes of Zn(2+), Cd(2+), and Hg(2+) with 2-(alpha-Hydroxybenzyl)thiamine Monophosphate Chloride

The binding sites of Zn(2+), Cd(2+), and Hg(2+) in complexes with 2-(alpha-hydroxybenzyl)thiamine monophosphate chloride, (LH)(+)Cl(-), have been investigated in the solid state [2-(alpha-hydroxybenzyl)thiamin monophosphate chloride monoprotonated at the phosphate group and protonated at N(1)' is denoted as (LH)(+)Cl(-); therefore, the ligand monoprotonated at the phosphate group and deprotonated at N(1)' is L]. Complexes of formulae MLCl(2), M(LH)Cl(3), and (MCl(4))(2)(-)(LH)(2)(+) (M = Zn(2+), Cd(2+), and Hg(2+)) were isolated in aqueous and methanolic solutions, depending on pH. The crystal structure of the complex of formula HgL(2)Cl(2) was solved, together with that of the free ligand (LH)(+)Cl(-), by X-ray crystallography. HgL(2)Cl(2) crystallizes in C2/c, with a = 32.968(6) ?, b = 7.477(2) ?, c = 21.471(4) ?, beta = 118.19(1) degrees, V = 4665(2) ?(3), and Z = 4. (LH)(+)Cl(-) crystallizes in Cc, with a = 10.951(3) ?, b = 17.579(4) ?, c = 13.373(3) ?, beta = 105.36(2) degrees, V = 2482.4(10) ?(3), and Z = 4. Mercury(II) binds to the N(1') of the pyrimidine ring. Both ligands are in the S conformation [Phi(T) = -98.1(9) degrees and Phi(P) = 176.1(10) degrees for HgL(2)Cl(2) and Phi(T) = 104.1(5) degrees and Phi(P) = 171.9(6) degrees for (LH)(+)Cl(-)]. (31)P and (13)C NMR spectra, together with vibrational spectra (IR/Raman), are used to deduce the binding sites of the metal and the protonation states of the ligand at various pH values. It is found that solid-state (31)P NMR spectroscopy is particularly useful in characterizing these complexes as the (31)P shielding tensors are sensitive to the state of the phosphate group. On the other hand, the (31)P NMR spectra indicate that direct bonding between Zn(2+) and Cd(2+) to the phosphate can occur under certain preparation conditions. Solid-state (13)C NMR and vibrational (IR/Raman) spectroscopic results are also in agreement with the other techniques.     

Colloidal transition-metal-doped ZnO quantum dots

Methods for introducing new magnetic, optical, electronic, photophysical, or photochemical properties to semiconductor nanocrystals are attracting intense applications-oriented interest. In this communication, we report the preparation and electronic absorption spectroscopy of colloidal ZnO DMS-QDs. Our synthetic procedure involves modification of literature methods known to yield highly crystalline and relatively monodisperse nanocrystals of pure ZnO to allow introduction of transition-metal dopants. We use ligand-field electronic absorption spectroscopy as a dopant-specific optical probe to monitor dopant incorporation during nanocrystal growth and to verify internal substitutional doping in Co2+:ZnO and Ni2+:ZnO DMS-QDs. To the best of our knowledge, these are the first free-standing oxide DMS-QDs reported. The synthesis of colloidal oxide DMS-QDs introduces a new category of magnetic semiconductor materials available for detailed physical study and application in nanotechnology.     

Conversion of Light into Electricity with Trinuclear Ruthenium Complexes Adsorbed on Textured TiO2 Films

A series of CN-bridged trinuclear Ru complexes of the general structure [RuL₂(μ-(CN)Ru(CN)L₂′)₂] where L is 2,2′-bipyridine-4,4′-dicarboxylic acid and L′ is 2,2′-bipyridine ( 1 )2,2′-bipyridine-4,4′-dicarboxylic acid ( 2 ), 4,4′-dimethyl-2,2′-bipyridine ( 3 ), 4,4′-diphenyl-2,2′-bipyridine ( 4 ), 1,10-phenanthroline ( 5 ), and bathophenanthrolinedisulfonic acid ( 6 ) have been synthesized, and their spectral and electrochemical properties investigated. The two carboxylic functions on the 2,2′-bipyridine ligand L serve as interlocking groups through which the dye is attached at the surface of TiO₂ films having a specific surface texture. The role of these interlocking groups is to provide strong electronic coupling between the π* orbital of the 2,2′-bipyridine and the 3d-wave-function manifold of the conduction band of the TiO₂, allowing the charge injection to proceed at quantum yields close to 100 %. The charge injection and recombination dynamics have been studied with colloidal TiO₂, using laser photolysis technique in conjunction with time-resolved optical spectroscopy. Photocurrent action spectra obtained from photo-electrochemical experiments with these trinuclear complexes cover a very broad range in the visible, making them attractive candidates for solar light harvesting. Monochromatic incident photon-to-current conversion efficiencies are strikingly high exceeding 80% in some cases. Performance characteristics of regenerative cells operating with these trinuclear complexes and ethanolic triiodide/iodide redox electrolyte have been investigated. Optimal results were obtained with complex 1 which gave a fill factor of 75 % and a power conversion efficiency of 11.3% at 520 nm.     

Proficiency testing in analytical chemistry, microbiology and laboratory medicine: working group discussions on current practice and future directions

A summary of the working group (WG) discussions on proficiency testing (PT) and external quality assessment (EQA) held at the joint EURACHEM/CITAC/EQALM workshop, Bracknell, UK, 16–18 February 2003 is provided. The nine WGs covered a range of issues concerned with current practice and future directions; PT/EQA as a tool for regulators (WG1); PT/EQA as a tool for accreditation (WG2); evaluation of performance and uncertainty (WG3); frequency of PT/EQA participation (WG4); selection of appropriate PT/EQA schemes (WG5); added value of PT/EQA and cost benefit evaluation (WG6); global harmonisation and rationalisation (WG7); new technical areas and challenges in PT/EQA (WG8); and accreditation of PT/EQA providers (WG9). Participants with different backgrounds were on each WG in order to capture a range of views and experience from different sectors. The discussions reflected on the keynote lectures and built, in many cases, on discussions at previous workshops in 2000 and 2002.