Heat transfer errors in quantitative differential thermal analysis

A DTA apparatus has been built to examine some of the errors neglected in present quantitative DTA. The heat transfer characteristics within DTA systems were found to limit in situ measurements of powder thermal conductivity. It was also demonstrated that the negligence of heat lost to the DTA block from the sample cell during an exothermic reaction and heat gained from the DTA block by the sample cell during endothermic reactions lead to large errors in quantitative estimations. A modified double differential thermocouple DTA was designed to take these heat losses into account. The apparatus was calibrated with CaCO₃ and kaolinite endotherms and the kaolinite exotherm and tested on the SrCO₃ rhombic trigonal inversion endotherm. The result was found to be in good agreement with accepted literature values.

---

Zusammenfassung Ein DTA-Apparatur wurde gebaut um einige in der gegenwärtig üblichen quantitativen DTA vernachlässigte Fehler zu prüfen. Es wurde gefunden, daß die Wärmeübertragungscharakteristika in DTA-Systemen die in situ Messungen der Wärmeleitfähigkeit von Pulvern begrenzen. Es wurde ebenfalls gezeigt, daß die Vernachlässigung von Wärmeverlusten der Probezelle an den DTA-Block bei exothermen Reaktionen und vom Wärmegewinn der Probezelle vom DTA-Block bei endothermen Reaktionen zu bedeutenden Fehlern in den quantitativen Bestimmungen führt. Ein DTA-Gerät mit doppeltem Differentialthermoelement wurde entworfen um diese Wärmeverluste zu berücksichtigen. Der Apparat wurde mittels der endothermen Reaktionen von CaCO₃ und Kaolinit, bzw. mittels der exothermen Reaktion von Kaolinit geeicht und an der Inversion von rhombischem zu trigonalem SrCO₃ erprobt.

---

Résumé On a réalisé un appareil ATD pour étudier certaines erreurs négligées jusqu'à présent en ATD quantitative. On a trouvé ainsi que les caractéristiques du transfert de chaleur limitent la mesure in situ de la conductivité thermique des poudres. On montre également que le fait de négliger les échanges de chaleur entre la cellule renfermant l'échantillon et le bloc ATD (pertes ou gains de chaleur suivant que les réactions sont exothermiques ou endothermiques) conduit à des erreurs considérables dans les dosages. Un double thermocouple différentiel a été conçu pour tenir compte de ces pertes. L'étalonnage de l'appareil a été ré alisé à l'aide des réactions endothermiques de CaCO₃ et de la kaolinite et contrôlé avec la transition endothermique de SrCO₃ (rhomboédrique-trigonal).

---

DTA , DTA. , DTA . , , DTA DTA . , . CaCO₃ SrCO₃.

     

High-pressure adsorption capacity and structure of CO2 in carbon slit pores: theory and simulation

We present new simulation results for the packing of single-center and three-center models of carbon dioxide at high pressure in carbon slit pores. The former shows a series of packing transitions that are well described by our density functional theory model developed earlier. In contrast, these transitions are absent for the three-center model. Analysis of the simulation results shows that alternations of flat-lying molecules and rotated molecules can occur as the pore width is increased. The presence or absence of quadrupoles has negligible effect on these high-density structures.     

The reduction of oxygen in molten lithium carbonate

Oxygen reduction on immersed gold electrodes has been studied in Li₂CO₃ melt under steady-state conditions and by the potential-sweep method. Reaction order measurements have established that the species being reduced is not molecular oxygen, but the peroxide ion. The latter is in chemical equilibrium with molecular oxygen and oxide ions. The rate-determining step is the primary charge transfer

where (O^?) is a transient species. The exchange current densities and activation energies have been determined. Under conditions where O₂^2? diffusion is not limiting (e.g. meniscus electrodes) the rate of neutralization of oxide by CO₂ at the electrode surface is probably rate-determining.     

Cluster chemistry: XVI. Synthesis and crystal structure of AuFe3(μ3-HCNBut)(CO)9(PPh3), an AuFe3 butterfly cluster

The reaction between AuCl(PPh₃ and [Fe(μ₃-HCNBu^t)(CO)₉]^? gives AuFe₃(μ₃-HCNBu^t)(CO)₉(PPh₃), crystals of which are triclinic, space group P$\text{1}$, with a 12.815(3), b 16.265(4), c 19.106(3) Å, α 67.15(3), β 73.46(2), γ 73.12(2)° and Z = 4. The comlex contains an AuFe₃ “butterfly” cluster, the Fe₃ face of which is bridged by the HCNBu^t ligand bonded in the (2σ + π) mode on the side opposite to the Au(PPh₃) moiety, which, contrary to expectation based on the analogy with H, bridges the two Fe atoms σ-bonded to N, and π-bonded to the CN group. The AuFe₂/Fe₃ dihedral angles in the two independent molecules differ significantly, with values of 110.9 and 132.1°.     

In-situ deactivation of packed columns for SFC

Residual adsorptive activity of reversed phase (RP) column packings used in supercritical fluid chromatography (SFC) can be significantly reduced by a dynamic in-situ silanization with diphenyltetramethyldisilazane (DPTMDS). RP-materials thus deactivated were characterized both chromatographically and by solid-phase ²⁹Si NMR.     

Reduction of the pertechnetate anion with bidentate phosphine ligands

The reduction of ammonium pertechnetate with bis(diphenylphosphino)methane (dppm), and with diphenyl-2-pyridyl phosphine (Ph(2)Ppy), has been investigated. The neutral Tc(II) complex, trans-TcCl(2)(dppm)(2) (1), has been isolated from the reaction of (NH(4))[TcO(4)] with excess dppm in refluxing EtOH/HCl. Chemical oxidation with ferricinium hexafluorophosphate results in formation of the cationic Tc(III) analogue, trans-[TcCl(2)(dppm)(2)](PF(6)) (2). The dppm ligands adopt the chelating bonding mode in both complexes, resulting in strained four member metallocycles. With excess PhPpy, the reduction of (NH(4))[TcO(4)] in refluxing EtOH/HCl yields a complex with one chelating Ph(2)Ppy ligand and one unidentate Ph(2)Ppy ligand, mer-TcCl(3)(Ph(2)Ppy-P,N)(Ph(2)Ppy-P) (3). The cationic Tc(III) complexes, trans-[TcCl(2)(Ph(2)P(O)py-N,O)(2)](PF(6)) (4) and trans-[TcCl(2)(dppmO-P,O)(2)](PF(6)) (5) (Ph(2)P(O)py = diphenyl-2-pyridyl phosphine monoxide and dppmO = bis(diphenylphosphino)methane monoxide), have been isolated as byproducts from the reactions of (NH(4))[TcO(4)] with the corresponding phosphine. The products have been characterized in the solid state and in solution via a combination of single-crystal X-ray crystallography and spectroscopic techniques. The solution state spectroscopic results are consistent with the retention of the bonding modes revealed in the crystal structures.     

An augmented ribbon model of protein structure

In this paper, work on a new model,an augmented ribbon model, for describing a number of features of primary, secondary, and super-secondary protein structure in a qualitative but mathematically rigorous way is discussed. The structural features that can be treated by the model include connectivity, directionality, chirality, orientation, and proximity which, in many cases, are difficult to deal with using more traditional structural representations (e.g. wireframe, ball-and-stick, or space-filling CPK). In practice, the information encoded in the augmented ribbon model is represented by a labelled, directed graph (digraph) which provides an efficient means for storing and analyzing the information on computers. This opens the way to computer-based analyses of proteins and for the application of similarity methods that have been shown to be quite useful in treating small molecules.     

Reduction of oxygen in lithium-potassium carbonate melt

The oxygen reduction reaction on smooth gold electrodes on Li/K (53: 47 at.%) carbonate melt has been examined in the temperature range 700–800°C. As in previous work on the Na/K melt [2], two chemically produced species (O₂^2? O₂^?) are reduced in parallel steps. The waves for the reduction of these species are close together in this melt, as distinct from those in the Na/K eutectic [2]. Exchange currents are somewhat higher than in the Na/K melt. Again, neutralization of the O^2? ion by CO₂ in rather slow, and may be rate-determining in porous electrodes.     

Moderating the nucleophilicity of the sulfide ligands in the dinuclear {Pt2S2} metalloligand system using triphenylarsine

Reaction of cis-[PtCl₂(AsPh₃)₂] with excess sodium sulfide in benzene gave the triphenylarsine analogue of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄] as an orange solid.The compound was characterised by detailed mass spectrometry studies, and by conversion to various alkylated and metallated derivatives.The sulfide ligands in [Pt₂(μ-S)₂(AsPh₃)₄] are less basic than the triphenylphosphine analogue, and the complex gives a relatively weak [M+H]⁺ ion in the positive-ion electrospray (ESI) mass spectrum, compared with the phosphine analogue.Methylation of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with MeI gave the species [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ and [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺, indicating a reduced tendency for the sulfide of [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ to undergo alkylation.The lability of the arsine ligands is confirmed by the reaction of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with n-butyl chloride, giving [Pt₂(μ-S)(μ-SBu)(EPh₃)₄]⁺ (E = P, As), which with Me₂SO₄ gave a mixture of [Pt₂(μ-SMe)(μ-SBu)(PPh₃)₄]²⁺ and [Pt₂(μ-SMe)(μ-SBu)(AsPh₃)₃Cl]⁺.Reactivity towards 1,2-dichloroethane follows a similar pattern.The formation and ESI MS detection of mixed phosphine-arsine {Pt₂S₂} species of the type[Pt₂(μ-S)₂(AsPh₃)_n(PPh₃)_4−n] is also discussed. Coordination chemistry of [Pt₂(μ-S)₂(AsPh₃)₄] towards a range of metal-chloride substrates, forming sulfide-bridged trinuclear aggregates, has also been probed using ESI MS, and found to be similar to the phosphine analogue. The X-ray crystal structure of [Pt₂(μ-S)₂(AsPh₃)₄Pt(cod)](PF₆)₂ (cod = 1,5-cyclo-octadiene) has been determined for comparison with the (previously reported) triphenylphosphine analogue. ESI MS is a powerful tool in exploring the chemistry of this system; in some cases the derivatising agent p-bromobenzyl bromide is used to convert sparingly soluble and/or poorly ionising {Pt₂S₂} species into soluble, charged derivatives for MS analysis.