Identification of ochratoxin A in food samples by chemical derivatization and gas chromatography-mass spectrometry.

The contamination of foods with ochratoxin A can be determined very sensitively by high-performance liquid chromatography (HPLC) with fluorescence detection. A novel procedure is described to confirm OA-positive results quantitatively down to the HPLC detection limit of 0.1 ppb. For this, ochratoxin A in the sample extract is converted into its O-methylochratoxin A methyl ester derivative, which is identified subsequently by gas chromatography-mass spectrometry negative-ion chemical ionization and multiple ion detection modes using the hexadeuterated O-methyl-d3-ochratoxin A methyl-d3 ester derivative as internal standard for quantification. In the analysis of more than 60 contaminated samples, the procedure was found to be very accurate.     

熔融织构生长强磁浮YBCO超导块材的取向和结构

采用熔融织构生长法结合顶部Ｓｍ１２３籽晶技术，成功地制备了直径为２０ｍｍ的ＹＢＣＯ超导块材。该块材具有极强的磁性能。用Ｘ射线θ／２θ扫描和Φ扫描分析其结构表明，样品在三维方向上具有很强的择优取向，其ｃ、ａ、ｂ轴方向分别与Ｓｍ１２３籽晶的ｃ、ａ、ｂ轴方向一致，并具有类似单晶的结构特点。     

LC Determination of Podophyllum Lignans and Flavonoids in Podophyllum emodi Wall.var.chinesis Sprague

A high-performance liquid chromatographic method for the simultaneous separation and determination of nine podophyllum lignans and two flavonoids in Podophyllum emodi Wall.var.chinesis Sprague was established. The separation was performed with the following condition: column, Kromasil-C18, 5 μm, 15 × 0.46 cm; solvent A, 25 mM phosphate buffer, pH 2.5; solvent B, methanol; gradient, 50/50/70% B at 0/13/33 min; flow rate, 0.8 mL min^?1; detection, UV 270 nm. β-Apopicropodophyllin was used as the internal standard. The samples of P. emodi Wall.var.chinesis Sprague from different sources were examined by the developed method. In addition, three methods for sample preparation were discussed. It is shown from the results that refluxing in chloroform displays high extraction efficiency.     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

Electrochemical Determination of Ascorbic Acid in Room Temperature Ionic Liquid BPPF6 Modified Carbon Paste Electrode

A room temperature ionic liquid N‐butylpyridinium hexafluorophosphate (BPPF₆) was used as a binder to make an ionic liquid modified carbon paste electrode (IL‐CPE), which showed good characteristics such as simple preparation procedure, fast electrochemical response and good conductivity. The electrochemical oxidation of ascorbic acid (AA) on the new IL‐CPE was carefully studied. The oxidation peak potential of AA on the IL‐CPE appeared at 109 mV (vs. SCE), which was about 338 mV decrease of the overpotential compared to that obtained on the traditional carbon paste electrode (CPE) and the oxidation peak current was increased for about four times. The electrochemical parameters of AA on the IL‐CPE were calculated with the charge transfer coefficient (α) and the electrode reaction rate constant (k_s) as 0.87 and 0.800 s^?1, respectively. Based on the relationship of the oxidation peak current and the concentration of AA a sensitive analytical method was established with cyclic voltammetry. The linear range for AA determination was in the range from 1.0×10^?5 to 3.0×10^?3 mol/L with the linear regression equation as I_p (μA)=?2.52–0.064C (μmol/L) (n=13, γ=0.9942) and the detection limit was calculated as 8.0×10^?6 mol/L (3σ). The proposed method was free of the interferences of coexisting substances such as dopamine (DA) and amino acids etc., and successfully applied to the vitamin C tablets determination.     

Three‐Component Reactions with (S)‐Methyl Pyroglutamate: An Efficient Way to Diversely Substituted Asymmetric Amidocyclohexenes

Chiral N‐dienyl lactams are crucial building blocks for the synthesis of complex organic compounds. However, their generation is rather challenging. This paper reports the novel one‐pot reaction of (S)‐methyl pyroglutamate as the a mide component with different a ldehydes and d ienophiles (AAD reaction) to give novel chiral 1‐amido‐2‐cyclohexenes. The corresponding N‐dienyl lactams generated in situ undergo subsequent Diels–Alder reactions in good yield and diastereoselectivity. The scope and limitations of the three‐component protocol were investigated. X‐ray and NMR spectroscopic analysis of the products as well as DFT calculations of the intermediates were also performed to explain the observed stereoselectivity and structural features.     

A SAPO-11 Silicoaluminophosphate Molecular Sieve with Stable Crystal Structure

A SAPO-11 silicoaluminophosphate molecular sieve with stable crystal structure was synthesized for the first time. After removing template by calcination, its crystal space group still retains Icm2 which the as-synthesized has. The catalyst deriving from the present SAPO-I 1 materials shows higher isomerization selectivity and higher paraffin hydroisomerization yield than those reported elsewhere.     

Long‐range π‐type hydrogen bond in dimers CH2?HF,CH2O?H2O,and CH2O?NH3

Using four basis bets, (6‐311G(d,p), 6‐31+G(d,p), 6‐31++G(2d,2p), and 6‐311++G(3df,3pd), the optimized structures with all real frequencies were obtained at the MP2 level for the dimers CH₂O? HF, CH₂O? H₂O, CH₂O? NH₃, and CH₂O? CH₄. The structures of CH₂O? HF, CH₂O? H₂O, and CH₂O? NH₃ are cycle‐shaped, which result from the larger bend of σ‐type hydrogen bonds. The bend of σ‐type H‐bond O…H? Y (Y?F, O, N) is illustrated and interpreted by an attractive interaction of a chemically intuitive π‐type hydrogen bond. The π‐type hydrogen bond is the interaction between one of the H atoms of CH₂O and lone pair(s) on the F atom in HF, the O atom in H₂O, or the N atom in NH₃. In contrast with the above three dimers, for CH₂O? CH₄, because there is not a π‐type hydrogen bond to bend its linear hydrogen bond, the structure of CH₂O? CH₄ is noncyclic shaped. The interaction energy of hydrogen bonds and the π‐type H‐bond are calculated and discussed at the CCSD (T)/6‐311++G(3df,3pd) level. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Structure and stability of endohedral X@Si20H20 complexes (X = Li, Na, K, Be, Mg, Ca)

The structure and stability of endohedral X@Si₂₀H₂₀ complexes (X = Li^0/+, Na^0/+, K^0/+, Be^0/2+, Mg^0/2+, Ca^0/2+) have been studied at the B3LYP/6-31G* level of density functional theory. It is found that complexes with X = Na^0/+, K^0/+, Mg and Ca^0/2+ are energy minimum structures with X at the cage center in I_h symmetry, while those with X = Li^0/+, Be^0/2+, Mg²⁺ have off-centered structures with X towards one pentagon face in C_5v symmetry. Large electron or charge transfer between the Si₂₀H₂₀ cage and the encapsulated X has been observed.     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.