一种利用质谱信息进行结构特征鉴定的模式识别方法

本文提出了分段式离子系列谱编码方法,实验证明具有很好的结构表征能力。本程序主要是以模式识别技术为基础,实现了对未知物谱图的KNN分类,进而得到未知物的主要结构特征。这个程序应用于有机化合物的分类,取得了满意的结果。     

The rotation and the phase transition in solid C60

The interaction between C60's in solid C60 has been calculated by (exp-6-1) potential, and the cause and the controlled factor of the high rapid rotations of C60 's were discussed. In order to describe the disordered degree of C60 rotation, an equivalent M is introduced. The phase transitions at the ~260 K and at the ~90 K are studied from the viewpoint of C60 rotation. The potential barriers of the ordered rotation below the ~260 K and the disordered rotation above the ~260 K have been given, and the effect of the external pressure on the temperature of phase transition has also been given.     

有机磷化合物的质谱研究(Ⅶ)——二氮二磷杂环戊烷衍生物的化学电离质谱

本文报道了七种4.5-二氧代-2-硫代-1,3,2,4-二氮二磷杂环戊烷衍生物的化学电离质谱(CIMS,甲烷为反应气),结果表明:CIMS中准分子离子MH~+为基峰离子;MH~+离子易发生失去H_2S,CO,C_3H_6等小分子的裂解,(M+C_2H_5)~+离子存在再断裂。     

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.     

二甲胺修饰戊二醛交联壳聚糖树脂的制备及性能

研究了在均匀水相介质条件下，采用戊二醛稀溶液制备交联壳聚糖树脂的方法，并以三聚氯氰为活化剂，合成了二甲胺修饰戊二醛交联壳聚糖树脂．研究了该树脂的红外光谱及吸附性能．该树脂对铜(Ⅱ)和牛血清白蛋白(BSA)的吸附容量分别为42mg／g(干)和940mg／g(干)，其吸附行为均符合Freundlich等温吸附模型．该树脂制备工艺简单，机械强度较好，可作为金属离子或蛋白质分离纯化的吸附剂和色谱填料．     

EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.     

聚合物驱蚊剂的慢释放研究

本文研究了丙烯酸酯共聚物载体对驱蚊剂N,N-二乙基间甲苯酰胺(DETA)慢释放行为的控制,探讨了单体配比、共聚物分子量以及DETA含量对释放速率的影响。结果表明。增加亲水性单体丙烯酸(AA),可提高DETA的释放速率;降低共聚物数均分子量,会减少DETA的释放量;剂型中DETA含量与释放量存在线性正比关系,但DETA的含量增加并不导致释放有效时间的线性增加。本文还就共聚物膜的透湿性和碱溶性作了研究,亲水性单体AA的增加同样导致透湿性和碱溶性的增加。制备的聚合物驱蚊剂经现场应用试验,表明具有良好的长效驱蚊特性。     

1,2,4-三苯基环戊二烯的合成及其烷基化反应

测定了颇哪醇在酸性条件下所得的脱水产物的分子结构.结果表明,在酸性条件下颇哪醇的脱水反应优于重排反应,由此合成了1,2,4-三苯基环戊二烯.该环戊二烯衍生物的烷基化反应,在通常条件下优先发生在碳环的第5位碳原子上,但在苛刻的剧烈反应条件下,进而发生在碳环的第3位碳原子上.讨论了脱水反应和烷基化反应的机理.     

FFC-1离子交换纤维物理化学性能的研究

利用扫描电镜、热失重-红外、元素分析、低温氮吸附等技术和化学手段对聚羧酸基FFC-1离子交换纤维的结构与性能特点等进行了系统研究．结果表明：FFC-1离子交换纤维为含适量酰肼类交联键的聚羧酸(钠)型离子交换材料，外比表面积大和传质距离短是其反应动力学性能优异的主要原因，FFC-1纤维具有良好的化学与热稳定性。在5mol/L硫酸、硝酸、盐酸和2mol／L氢氧化钠溶液中浸泡，交换容量未见明显降低。但过氧化氢溶液对其功能基有明显破坏，CO2为FFC-1纤维在高温区间(300℃～350℃)的主要分解产物。     

酚醛树脂固化过程的红外光谱分析

利用红外光谱(IR)及其变温样品池、定量分析程序对酚醛树脂固化过程中的结构变化进行了研究,它对于酚醛树脂固化过程的质量控制具有重要意义。