CdTe/CdO nH2O核壳纳米复合粒子的水相合成及光学特性.

"研究了CdTe/CdO?nH2O核壳纳米复合物的水相合成及其光学特性． 以巯基乙酸为稳定剂通过氯化镉和碲氢化钠反应制备了碲化镉纳米晶． 在反应过程中, 反应前驱溶液中镉离子与碲离子的摩尔浓度比对最终制备的碲化镉纳米晶的荧光强度起到了极其重要的作用． 在pH值为8.2, 镉离子与碲离子摩尔浓度比为4.0的情况下,制备出了具有最强荧光强度的碲化镉量子点．之后,CdTe/CdO?nH2O核壳纳米复合物在水相中制备出来．在适当的氢氧化镉沉积在碲化镉纳米粒子表面后,碲化镉量子点的荧光大大增强．所制备的CdTe/C     

A copper-based coordination polymer formed through synergistic bridging of 1,2,4-triazole and acetate anions: synthesis,crystal structure and magnetic properties

Transition Metal Chemistry - A Cu(II) coordination polymer, [Cu2(pztrz)2(μ-CH3COO)(CH3COO)]·3H2O (1), derived from mono-substituted 1,2,4-triazole derivative 3-(pyrazinyl)-1,2,4-triazole...     

Improving the sensitivity of cellulose fiber-based lateral flow assay by incorporating a water-dissolvable polyvinyl alcohol dam

Cellulose - Lateral flow assay (LFA) is an important point-of-care (POC) test platform due to the associated portability, on-site testing, and low cost for diagnosis of pathogen infections and...     

Polyaniline encapsulated silicon nanocomposite as high-performance anode materials for lithium ion batteries

Polyaniline encapsulated silicon (Si/PANI) nanocomposite as anode materials for high-capacity lithium ion batteries has been prepared by an in situ chemical polymerization of aniline monomer in the suspension of Si nanoparticles. The obtained Si/PANI nanocomposite demonstrates a reversible specific capacity of 840 mAh g^?1 after 100 cycles at a rate of 100 mA g^?1 and excellent cycling stability. The enhanced electrochemical performance can be due to that the polyaniline (PANI) matrix offers a continuous electrically conductive network as well as enhances the compatibility of electrode materials and electrolyte as a result of suppressing volume stress of Si during cycles and preventing the agglomeration of Si nanoparticles.     

Thermal hazard assessment and ranking for organic peroxides using quantitative structure–property relationship approaches

Journal of Thermal Analysis and Calorimetry - Chemical reactivity hazards of organic peroxides are major concerns of the chemical industry due to many serious incidents every year. Thermal hazard...     

Calibration of DC Potential Drop Method Considering Fatigue Load

Experimental Mechanics - The direct current potential drop (DCPD) method is an important method for monitoring crack initiation and propagation in specimens. During fatigue crack growth monitoring,...     

Meshfree simulations of large scale ductile fracture of stiffened ship hull plates during ship stranding

Meccanica - In this work, we have developed a systematic computational methodology to directly simulate the ductile fracture of ship hull structure during ship stranding based on the meshfree...     

柱面微通道板的制备及其性能研究

针对未来空间天文学应用的超分辨率光谱成像仪器的需求,对低噪声柱面微通道板（MCP）的制备方法及其性能进行了研究. 提出了一种将光学抛光与热成型相结合的新的柱面MCP制备方法,利用不含放射性元素的低噪声MCP玻璃,制备出曲率半径为400mm、尺寸为30mm′46mm、长径比为80:1、通道直径12.5mm、通道间距15mm的柱面MCP,并将其与感应电荷楔条形阳极（WSA）组成光子计数探测器,对其暗计数率、分辨率进行了检测,暗计数率约为0.1counts/cm2×s.     

均匀磁场下碳离子笔形束的剂量变化分析及位置修正方法

分析外加均匀磁场对于碳离子笔形束剂量分布的影响,并考虑修正这种影响,为磁共振成像引导碳离子放射治疗的临床应用提供指导。本文利用蒙特卡罗方法模拟计算了不同能量碳离子笔形束在不同强度磁场下的剂量分布情况,发现垂直于碳离子束入射方向的均匀磁场对于碳离子笔形束射程缩短的影响很小,磁场对碳离子束的主要影响是引起束流横向偏转,特别是碳离子束布拉格峰位置的横向侧移。横向侧移程度与碳离子束的能量和磁场强度相关,根据模拟结果,得到了一个计算碳离子束布拉格峰在磁场中相对横向偏转的方程,并提出一种校正外加磁场引起的碳离子束布拉格峰横移的角度修正方法。这些结果可用于指导磁共振图像引导碳离子放射治疗计划系统的研发。