Scope and limitations of a new highly selective synthesis of unsymmetrical monomers for the synthesis of precursors toward poly(arylenevinylene)s

In our laboratory a precursor route to poly(p-phenylenevinylene) derivatives is developed in which unsymmetrically substituted p-xylene derivatives, possessing a benzylic sulfinylalkyl group, are used as monomers. Because of this unsymmetry, we were forced to investigate thoroughly the synthesis of these sulfoxides, as we start from symmetric and readily accessible molecules, namely, bis(halomethyl)-p-xylene derivatives. In a former publication, a new extremely effective route for the production of these unsymmetrically substituted sulfinyl monomers was presented. This paper expands upon these previously reported results. To examine the scope and limitations of this elegant route, this new method was applied to the synthesis of various derivatives not included in the initial work.     

A liquid chromatography/electrospray ionization-tandem mass spectrometry method for quantification of specific organophosphorus pesticide biomarkers in human urine

Organophosphorus pesticides are commonly used in both agricultural and residential settings. The widespread use of these chemicals makes it almost impossible for humans to avoid exposure. In order to determine background human exposure, there is a need for fast, reliable, and sensitive analytical methods. We have developed a sensitive method to quantify specific biomarkers of the organophosphorus pesticides acephate, azinphos, chlorpyrifos, coumaphos, diazinon, isazofos, malathion, methamidophos, parathion and pirimiphos or their O,O-dimethyl analogues in human urine, as their selective metabolites or as the intact pesticide. Isotopically labeled internal standards were used for eight of the analytes. The use of labeled internal standards in combination with high-performance liquid chromatography electrospray ionization–tandem mass spectrometry provided a high degree of specificity. Repeated analysis of urine samples fortified with high and low concentrations of the analytes gave relative standard deviations (RSD) of less than 10% for the analytes with an isotopically labeled standard. Analytes without isotopically labeled standards had higher RSD. For all compounds except methamidophos and acephate, the recoveries were greater than 70%. The limits of quantification for most of the analytes were in the range of 0.1 to 1 ng/mL. We detected concentrations of most of these pesticides and/or their metabolites in urine samples from non-occupationally exposed persons using our method. Our frequencies of detection for the analytes measured ranged from 1% to 98%.     

Effect of pressure on free-radical copolymerization kinetics. I. A concept of additivity of partial molar volumes of activation

A short review of the effect of pressure on copolymerization kinetics shows the necessity of simple models for a better understanding of activation volumes. Therefore, a simple concept, possibly generally valid for free-radical polymerization, is proposed, based on the assumption that molar volumes of activation can be expressed as an addition of a characteristic radical and a monomer contribution, regardless of the combination involved. The scheme may facilitate the visualization of the transition state and contribute to the understanding of reaction mechanisms of radical polymerizations. Ethylene–vinyl acetate copolymerization at 62°C with tert-butyl alcohol as solvent agrees with the proposed scheme, appearing from the pressure independence of the product of reactivity ratios at the different levels (35,600, and 1200 kg/cm²). Implicitly it can be shown that an ethylene monomer contributes about 2 cm³/mole more to the activation volumes of the propagation reactions than does the vinyl acetate monomer, whereas for the radicals the difference of the respective contributions to the activation volumes is opposite in sign.     

Selenium in environmental waters: Determination, speciation and concentration levels

This article reviews the different methods used for the determination of selenium species in all types of environmental waters. Basic difficulties are discussed and the efficiency of the methods is explained in view of the sub-mug/1. concentration levels. Special attention is paid to preconcentration steps. Published data on speciation and concentration levels in various water samples are critically reviewed.     

Conversion of diaryliodonium salts to aryl fluorides

The preparation of aryl fluorides by the reaction of diaryliodonium salts with KF is discussed. Generally, best results were obtained when the salt Ar₂I⁺X^? was heated with KF in the absence of solvent. The counterion, X^?, must be non-nucleophilic.     

Anomalous vibrational relaxation of a hot S*1 state of 3,4-benzpyrene in 2-methylpentane

Two anomalous emission bands in the fluorescence spectrum of 3,4-benzpyrene, dissolved in 2-methylpentane, have been studied as a function of temperature. These emissions originate from the second excited singlet state S₂, and from a vibrationally excited S₁ (S^*₁) respectively. From the temperature dependence of the relative yield and the decay time of the S^*₁ emission it can be concluded that the vibrational relaxation of this state is hampered. The rate constant for this relaxation process is smaller that 4 > 62;x 10⁷ sec^?1.     

Differentiation between dexamethasone and betamethasone in a mixture using multiple mass spectrometry

Direct gas chromatographic methods to analyse phenylurea pesticides are discouraged by the thermal instability of these compounds, that in conventional hot splitless inlet systems leads to extensive and irreproducible formation of isocyanates and amines. However a careful control of the operating conditions, like the inlet temperature, the pressure and the presence of suitable chemical additives (as acetic acid, low-molecular-mass amines, organic anhydrides) can either: (i) minimise the thermal decomposition enabling the direct GC-MS analysis of phenylureas, or (ii) lead to reproducible conversion to isocyanates. Experimental design was employed to study the effect of the experimental variables on the thermal transformation of phenylurea pesticides in splitless inlet system. Two strategies were alternatively optimised: (i) the minimisation of degradation reactions to increase the signal of phenylureas; (ii) the maximisation of the degradation to isocyanates that are in turn determined. The maximal yields in isocyanate were obtained with high inlet temperatures, low carrier flows in the injection phase and the presence of acetic anhydride. By contrast, the use of relatively low inlet temperatures, high carrier flows during the injection and the presence of an amine maximise the response of the parent compounds.     

Comparison of experimental and calculated relative sensitivity coefficients for spark-source mass-spectrometry of metals

Sensitivity calibration has been performed for the spark-source mass-spectrometric analysis of iron, copper and aluminium matrices, with standard reference materials. The experimental relative sensitivity coefficients, corrected for discrimination effects in the mass spectrometer, are compared with values obtained with various empirical approaches to calculate relative sensitivity coefficients for an r.f. spark. The best correlation found is only of the order of 50%.     

Synthesis of N-(tosyl)azetidin-2-imines

A synthetic route for N-(tosyl)azetidin-2-imines $\text{6}$, a novel class of derivatives of β-lactams, has been developed. The procedure is applicable to the synthesis of azetidin-2-imines related to penicillins and cephalosporins.     

Stability study and quantitative determination of mebeverine hydrochloride in tablets by means of reversed-phase high-performance liquid chromatography

Summary A rapid and specific reversed-phase high-performance liquid chromatographic method (RPHPLC) is described for the determination of mebeverine hydrochloride in tablets. Elution was performed on an octyl silane column with a methanol-water mixture (75-25), containing 0.05% hexylamine as silanol-blocking agent, adjusted to pH 5.0 with phosphoric acid. The method gave accurate, precise and reproducible results. The mean recovery of the drug from six synthetic tablet mixtures was 100.0% with a relative standard deviation (RSD) of 0.94%. In order to test the specificity of the method, the interference of the degradation compounds of mebeverine hydrochloride and of the intermediates from the synthesis was investigated. None of them did interfere. By means of mass spectrometry and UV-spectrophotometry, the degradation compounds of mebeverine were identified as veratric acid and as 4-|ethyl-[2-(4-methoxyphenyl)-1-methylethyl]amino| 1-butanol. The stability study proved that mebeverine hydrochloride is very stable in tablets; the tablets still contain more than 95% of the declared drug potency after storage for more than one year at 50°C.Colofac; Duspatal; Duspatalin