A sensitive and specific method for the determination of total ribavirin in human red blood cells by liquid chromatography-tandem mass spectrometry

A sensitive and specific method using high-performance liquid chromatography (LC)-tandem mass spectrometry (MS) for the analysis of total ribavirin in human red blood cells (RBC) is developed and validated. The method involves the addition of an internal standard and perchloric acid, the conversion of ribavirin phosphorylated metabolites to ribavirin, purification with a solid-phase exchange cartridge, and LC-MS-MS analysis. The MS-MS is selected to monitor m/z 245-113 for ribavirin and m/z 250-113 for [13C]ribavirin using positive electrospray ionization. The calibration curve is linear over a concentration of 100-10,000 ng/mL with a limit of quantitation of 100 ng/mL. Mean interassay accuracy for quality control (QC) at 100, 1000, and 10,000 ng/mL are 101.8%, 99.4%, and 98.8%, respectively. Mean interassay precision (%CV) for QC at 100, 1000, and 10,000 ng/mL are 5.0%, 5.0%, and 2.5%, respectively. Extractibility of total ribavirin from RBC is confirmed with RBC obtained from a [(14)C]ribavirin-dosed monkey. The method is used to determine the free and total ribavirin concentration in human RBC obtained from hepatitis C patients treated with ribavirin.     

Measurement and Identification of (R)- and (S)-6-O-Desmethylnaproxen Enantiomers as Diastereomeric O-Ethoxycarbonyl/(R)-(+)-1-Phenylethylamides in Urine by GC and GC-MS

Enantioseparations of (R)- and (S)-6-O-desmethylnaproxens as O-ethoxycarbonyl/(R)-(+)-1-phenylethylamides and (R)- and (S)-naproxens as (R)-(+)-1-phenylethylamides were achieved by achiral gas chromatography in a single run within 11 min. The characteristic mass spectral patterns facilitated easier peak identification. The method for determinations of (R)-naproxen (1.0 to 50 ng) and (S)-naproxen (100 to 2000 ng) was linear with acceptable repeatability and accuracy. The enantiomeric composition ratios between (R)- and (S)-6-O-desmethylnaproxens and between (R)- and (S)-naproxens in urine sample collected six hours after oral administration of (S)-naproxen tablets were measured to be 2.2 (± 0.2):97.8 (± 0.2) and 2.1 (± 0.1):97.9 (± 0.1), respectively.     

Fast determination of the tin content in cassiterite ores by photon activation method

Photon activation analysis has been success-fully applied to the fast and non-destructive analysis of tin in cassiterite ores based on the 159.7 keV gamma line of^123mSn produced in the¹²⁴Sn/γ, n/^123mSn reaction. In order to improve the accuracy of analytical results, corrections for self-absorption and pile-up effects were performed. Under typical conditions /15 μA electron beam current, 15 MeV bremsstrahlung energy, 5 min irradiation time and 10 min measurement/ the sensitivity of the analysis is 10 ppm. The proposed method can be used for routine analysis of tin in geological samples.     

Monitoring intracellular proteins using fluorescence techniques: from protein synthesis and localization to activity

The recent breakthroughs in genomics and proteomics and improvements of optical methods have made it possible to obtain localized, real-time information on intracellular proteins dynamics, through dynamic three-dimensional (3D) maps of the living cell with nanometric resolution of individual molecules. On one side, brighter variants of the Green Fluorescence Protein (GFP) have been engineered that have different excitation and/or emission spectra that better match available light sources. Like their parent molecule, these variants retain their fluorescence when fused to heterologous proteins on the N- and C- terminals, and this binding generally does not affect the functionality of the tagged protein leading the way to their use as an intracellular reporter. On the other side, optical methods have been improved to allow reaching the level of single-molecule detection inside living cells. Nevertheless some limitations exist for the use of GFP variants for probing 3D conformational changes of proteins. First, these variants are fused to the N and/or C terminals of the studied protein, which are generally not the best location to detect conformational changes resulting from the binding to other proteins or enzyme substrates. Then their own relatively large size makes them unusable for tagging small proteins. These limitations suggest that new tagging processes, permitting the location of the right fluorescent markers at the right places, must be found to built up inter- and/or intra-molecular rulers allowing one to monitor conformational changes resulting from intracellular protein-protein, protein-membrane, and enzyme-substrate binding. These specific locations can be obtained from in vitro studies of 3D conformational changes that occur during protein docking.     

High pressure studies on new chiral compounds exhibiting TGBA phase

Effects of high pressures on phase sequences of the two homologousn=16 andn=18 of the (3-fluoro-4 ((R) or (S)-methylheptyloxy) 4, (4-fluoro benzoyloxy) tolans) series have been studied. Both compounds exhibit the new twisted Smectic A phase called Twist Grain Boundary TGB_A phase. The high pressure experiments were performed by thermobarometric analysis. The order of the transitions (first or second) have been determined in respect to pressure and temperature. The pressure-temperature phase diagrams show that the TGB_A phase is stabilized by increasing pressure; an inducedN ^* phase appears under high pressure for n=18 leading to the observation of TGB_A-N ^*-I triple point.     

Rare earth impurities in high purity lanthanum oxide determined by neutron activation analysis

Individual rare earth impurities in high purity La₂O₃ (99.9%) have been determined by NAA after pre-separation of the matrix (La). The separation is carried out on an anion exchanger (Dowex 1×8) using different mixtures of methanol/nitric acid as eluants. The rare earth elements from Dy to Lu are eluted quantitatively using a 10% 1M HNO₃-90% methanol mixture, while the light rare earths from Ce to Gd are eluted quantitatively using a 10% 0.05M HNO₃-90% methanol mixture. La, which is retained on the column, is eluted using 0.1M HNO₃. The recoveries of the various rare earth elements have been checked using radiotracers and also by spiking the sample with known amount of elements, and the recoveries are found to be quantitative. Results obtained on a typical high purity lanthanum oxide are reported here.     

Photocrosslinking of functionalized rubber. II. Photoinitiated cationic polymerization of epoxidized liquid natural rubber

Low molecular weight epoxidized natural rubber has been crosslinked within seconds by UV irradiation in the presence of a triarylsulfonium salt. The photoinitiated cationic ring-opening polymerization was studied quantitatively by infrared spectroscopy and shown to proceed with surprisingly long kinetic chains in such solid medium. The high conversion (60%) needed for complete insolubilization, together with the presence of tetrahydrofuran structures, argue in favor of an intramolecular polymerization process involving neighboring epoxy groups. The photoinitiator concentration has a strong influence on the rate and extent of the reaction, as well as on the depth of cure profile. Because of an efficient dark process, close to 100% conversion was reached upon storage of the irradiated elastomer at ambient, with a concomitant increase of the gel fraction and the polymer hardness. The grafting of pendent acrylate groups onto the polymer chain leads to a three-fold decrease of the initial rate of polymerization of the epoxide. The photocuring of natural rubber bearing both epoxy and acrylate groups generates a dual polymer network which combines the properties of the two moieties. © 1995 John Wiley & Sons, Inc.     

Accuracy of free energies of hydration for organic molecules from 6-31g*-derived partial charges

Absolute free energies of hydration have been computed for 13 diverse organic molecules using partial charges derived from ab initio 6-31G* wave functions. Both Mulliken charges and charges fit to the electrostatic potential surface (EPS) were considered in conjunction with OPLS Lennard–Jones parameters for the organic molecules and the TIP4P model of water. Monte Carlo simulations with statistical perturbation theory yielded relative free energies of hydration. These were converted to absolute quantities through perturbations to reference molecules for which absolute free energies of hydration had been obtained previously in TIP4P water. The average errors in the computed absolute free energies of hydration are 1.1 kcal/mol for the 6-31G* EPS charges and 4.0 kcal/mol for the Mulliken charges. For the EPS charges, the largest individual errors are under 2 kcal/mol except for acetamide, in which case the error is 3.7 kcal/mol. The hydrogen bonding between the organic solutes and water has also been characterized. © John Wiley & Sons, Inc.     

Control synthesis of isocyanate and alkoxy-silane terminated macromers

The kinetics of the reactions in bulk of 4,4′-dicyclohexyl methane diisocyanate (H₁₂ MDI) and 5-isocyanato-1,3,3-trimethylcyclohexylmethyl isocyanate or isophorone diisocyanate (IPDI) with benzylic alcohol (BZA) and α-hydroxy-ω-methyl ether-terminated polyethylene oxide PEO (M?_w = 350) were studied by size exclusion chromatography (SEC) and ¹³C nuclear magnetic resonance (¹³C-NMR). The substitution effect is exhibited in the case of H₁₂ MDI reactivity. The kinetic constants were calculated by a numerical method. The second-order kinetic mechanism was shown to be valid. In the IPDI case, the cycloaliphatic isocyanate group is shown to be more reactive than the aliphatic group in our conditions, without catalysis, in agreement with previous results from the literature, in our obtained by ¹H-and ¹³C-NMR without any catalyst. The reactivity ratio is found to be on the order of 3. This difference in reactivity of the two isocyanate groups is used for the control synthesis of isocyanate and alkoxy-silane-terminated macromers.