Double-pass casting: A novel technique for developing high performance ultrafiltration membranes

Double-pass casting was evaluated as a technique to overcome hard-to-cast membranes or hard-to-mix solutions. Two types of polyethersulfone (PES) membranes were tested, one incorporating a hydrophilic surface modifying additive and the other with a hydrophobic one. It was found that the morphological improvement was more obvious for hydrophobic membranes since their solutions were not completely homogenous and hard-to-cast. The double-pass hydrophobic membranes had smoother surfaces and more porous support layers, resulting in higher fluxes, higher volume of treated water (67.4% increase) but decreased natural organic matters (NOM) rejection. The new casting approach produced hydrophilic membranes having a spongy structure (as opposed to finger-like cavities), yet they had similar NOM rejection, a 12.4% higher flux than the single-pass membranes prepared from the same dope. This is attributed to the quite homogenous hydrophilic casting solutions and to the performance of the original hydrophilic membranes (single-pass casting) that was relatively good.     

Cell culture chip using low-shear mass transport

We have developed a flow cell that allows culturing adherent cells as well as suspended cells in a stable, homogeneous, and low-shear force environment. The device features continuous medium supply and waste exchange. In this paper, a simple and fast protocol for device design, fabrication, and assembly (sealing) based on a poly(dimethylsiloxane) (PMDS)/glass slide hybrid structure is described. The cell culture system performance was monitored, and the effective shear force inside the culture well was also determined. By manipulating the device dimensions and volumetric flow rate, shear stress was controlled during experiments. Cell adhesion, growth, proliferation, and death over long-term culture periods were observed by microscopy. The growth of both endothelial and suspension cells in this device exhibited comparable characteristics to those of traditional approaches. The low-shear culture device significantly reduced shear stress encountered in microfluidic systems, allowing both adherent and suspended cells to be grown in a simple device.     

Laser desorption/ionization mass spectrometry fingerprinting of complex hydrocarbon mixtures: application to crude oils using data mining techniques

Crude oil fingerprints were obtained from four crude oils by laser desorption/ionization mass spectrometry (LDI-MS) using a silver nitrate cationization reagent. Replicate analyses produced spectral data with a large number of features for each sample (>11,000 m/z values) which were statistically analyzed to extract useful information for their differentiation. Individual characteristic features from the data set were identified by a false discovery rate based feature selection procedure based on the analysis of variance models. The selected features were, in turn, evaluated using classification models. A substantially reduced set of 23 features was obtained through this procedure. One oil sample containing a high ratio of saturated/aromatic hydrocarbon content was easily distinguished from the others using this reduced set. The other three samples were more difficult to distinguish by LDI-MS using a silver cationization reagent; however, a minimal number of significant features were still identified for this purpose. Focus is placed on presenting this multivariate statistical method as a rapid and simple analytical procedure for classifying and distinguishing complex mixtures.     

DFT studies on the mechanism of the diboration of aldehydes catalyzed by copper(I) boryl complexes

The detailed mechanism for the diboration of aldehydes catalyzed by (NHC)Cu(boryl) complexes (NHC = N-heterocyclic carbene) was studied with the aid of DFT by calculating the relevant intermediates and transition states. The results show that the catalyzed diboration occurs through aldehyde insertion into Cu-B to give a Cu-O-C(boryl) species followed by sigma-bond metathesis with a diboron reagent. It is the "electron-richness", that is, the nucleophilicity of the Cu-boryl bond, which gives rise to a small insertion barrier and determines the direction of insertion. The results of our calculations also explain the formation of the product, observed experimentally, from the stoichiometric reaction of (IPr)Cu-Bpin (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) with mesitylaldehyde. In the absence of a diboron reagent, the insertion intermediate having a Cu-O-C(boryl) linkage isomerizes to the thermodynamically preferred Cu-C-O(boryl) isomer via a boryl migration to the metal-bonded oxygen through an S(E)2-like transition state. We have also studied the catalyzed diboration of 2-pyridinecarboxaldehyde, which gives the unexpected reductive coupling product 1,2-di-2-pyridyl-1,2-bis(pinacolboroxy)ethane. The insertion intermediate, which contains a coordinated pyridyl group, isomerizes easily to a 1,2-dihydropyridine form, preventing its metathesis with a diboron reagent to give the expected diboration product as observed for other aldehyde substrates.     

Growth of narrowly dispersed porphyrin nanowires and their hierarchical assembly into macroscopic columns

The self-assembly of amphiphilic (porphyrin)Sn 1 in an aqueous Pluronic F127 media results in the formation of narrowly dispersed nanowires. Variation of aqueous Pluronic concentrations allows for a systematic variation of porphyrin nanowire lengths while keeping their widths constant. These nanowires can be further assembled into secondary macroscopic columns.     

Hydrogen-mediated metal-carbon to metal-boron bond conversion in metal-carboranyl complexes

A hydrogen-mediated Ru-C to Ru-B bond conversion was observed experimentally and supported by the theoretical calculations. Treatment of [eta(5):sigma(C)-Me(2)C(C(5)H(4))(C(2)B(10)H(10))]Ru(COD) (1) bearing a Ru-C(cage) sigma bond with PR(3) in the presence of H(2) gave Ru-B(cage) bonded complexes [eta(5):sigma(B)-Me(2)C(C(5)H(4))(C(2)B(10)H(10))]RuH(2)(PR(3)) (R = Cy (2), Ph (3)) (sigma(C): Ru-C(cage) sigma bond; sigma(B): Ru-B(cage) sigma bond). Complex 3 was converted to [eta(5):sigma(B)-Me(2)C(C(5)H(4))(C(2)B(10)H(10))]Ru(L(2)) in the presence of L(2) (L(2) = dppe (4), PPh(3)/P(OEt)(3) (5), PPh(3)/pyridine (6)) via liberation of H(2) upon heating. These complexes were fully characterized by various spectroscopic techniques, elemental analyses, and single-crystal X-ray diffraction studies. DFT calculations show that this conversion process is both kinetically and thermodynamically favorable and requires involvement of a hydride ligand.     

Chemical constituents from the leaves of Manglietia phuthoensis and their effects on osteoblastic MC3T3-E1 cells

Two new phenyl glycosides, mangliesides A and B (1, 2), a new ionol glycoside, manglieside C (3), two new lignan glycosides, mangliesides D and E (4, 5), were isolated from the leaves of Manglietia phuthoensis, along with two known lignans, 3-methoxymagnolol (6) and obovatol (7). Their structures were established by means of 1D and 2D NMR, electrospray ionization (ESI)-MS and HR-ESI-MS experiments. Among them, compounds 2 and 5 significantly (p<0.05) increased the growth and differentiation of osteoblastic MC3T3-E1 cells in vitro.     

Dioxopiperazine Alkaloids Produced by the Marine Mangrove Derived Endophytic Fungus Eurotium rubrum

Cultivation of the fungal strain Eurotium rubrum, an endophytic fungus that was isolated from the inner tissue of stems of the mangrove plant Hibiscus tiliaceus, resulted in the isolation of two new dioxopiperazine derivatives, namely, dehydrovariecolorin L ( 1 ) and dehydroechinulin ( 2 ), together with eight known dioxopiperazine compounds including variecolorin L ( 3 ), echinulin ( 4 ), isoechinulin A ( 5 ), dihydroxyisoechinulin A ( 6 ), preechinulin ( 7 ), neoechinulin A ( 8 ), neoechinulin E ( 9 ), and cryptoechinuline D ( 10 ). The structures of the isolated compounds were determined by extensive analysis of their spectroscopic data as well as by comparison with literature. Compounds 1, 2, 9 , and 10 were investigated for their α,α‐diphenyl‐β‐picrylhydrazyl (DPPH) radical‐scavenging activity. In addition, the new compounds, 1 and 2 , were evaluated for their cytotoxic activity against the P‐388, HL‐60, and A549 cell lines.     

Effects of Charged Surfactants on Interfacial Water Structure and Macroscopic Properties of the Air-Water Interface

Surfactants are used to control the macroscopic properties of the air-water interface. However, the link between the surfactant molecular structure and the macroscopic properties remains unclear. Using sum-frequency generation spectroscopy and molecular dynamics simulations, two ionic surfactants (dodecyl trimethylammonium bromide, DTAB, and sodium dodecyl sulphate, SDS) with the same carbon chain lengths and charge magnitude (but different signs) of head groups interact and reorient interfacial water molecules differently. DTAB forms a thicker but sparser interfacial layer than SDS. It is due to the deep penetration into the adsorption zone of Br⁻ counterions compared to smaller Na⁺ ones, and also due to the flip-flop orientation of water molecules. SDS alters two distinctive interfacial water layers into a layer where H⁺ points to the air, forming strong hydrogen bonding with the sulphate headgroup. In contrast, only weaker dipole-dipole interactions with the DTAB headgroup are formed as they reorient water molecules with H⁺ point down to the aqueous phase. Hence, with more molecules adsorbed at the interface, SDS builds up a higher interfacial pressure than DTAB, producing lower surface tension and higher foam stability at a similar bulk concentration. Our findings offer improved knowledge for understanding various processes in the industry and nature.