Characterization of two irradiation positions for fission track dating at the Lena Triga Mark II reactor

In the present paper the use of two natural uranium dosimeters is described. Data are compared with fluence values obtained by using NIST glass standards and the traditional activation of metal foils. Finally an example is reported for application of neutron dosimetry to the dating of the Fish Canyon Tuff age standard.     

Square wave adsorptive stripping voltammetry of molybdenum(VI) in continuous flow at a wall-jet mercury film electrode sensor

An adsorptive stripping voltammetry method for the determination of traces of molybdenum(VI) in flowing solution at a wall-jet electrode sensor has been developed. After adsorption of a molybdenum complex on a wall-jet mercury film electrode, the complex is reduced by a square wave scan. More satisfactory results were obtained using 8-hydroxyquinoline as a complexing agent in nitrate medium than using Toluidine Blue in oxalic acid. Enhanced sensitivity was achieved by optimizing adsorption time and square wave parameter values. The detection limit of Mo(VI) was found to be at the nanomolar level. Interference of some other metallic species in the determination of nanomolar Mo(VI) was also investigated: Cu(II), Zn(II), Mn(II) do not interfere at 10 muM, whereas 1 muM FeEDTA(-) causes an increase in peak current. This iron interference was removed effectively with citric acid.     

Selective determination of cobalt using polyurethane foam and 2-(2-benzothiazolylazo)-2-p-cresol as a spectrophotometric reagent

The present work describes a selective, rapid and economical method for the determination of cobalt using the 2-(2-benzothiazolylazo)-p-cresol (BTAC) as a spectrophotometric reagent associated with a solid extraction on polyurethane foam. The BTAC reacts with Co(II) in the presence of Triton-X100 surfactant forming a green complex with maximum absorption at 615 nm. The reaction is used for cobalt determination within a pH range of 6.50-7.50, with an apparent molar absorptivity of 1.62 x 10(4) L mol(-1) cm(-1). Beer's Law is obeyed for a concentration of at least 1.60 microg ml(-1). A selective procedure is proposed for cobalt determination in the presence of Fe(II), Hg(II), Zn(II) and Cu(II) up to milligram levels using masking agents. Polyurethane foam is used for the preconcentration and separation of cobalt from thiocyanate media and this procedure is applied to its determination in nickel salts and steel alloys.     

Determination of salicylate in blood serum using an amperometric biosensor based on salicylate hydroxylase immobilized in a polypyrrole-glutaraldehyde matrix

The use of an amperometric biosensor for the salicylate determination in blood serum is described. The biosensor is based on salicylate hydroxylase (EC 1.14.13.1) electropolymerized onto a glassy carbon-working electrode with polypyrrole and glutaraldehyde, to improve the biosensor lifetime. The hexacyanoferrate (II) was also incorporated to work as a redox mediator to minimize possible interferences. The salicylate is enzymatically converted to catechol, which is monitored amperometrically by its electrooxidation at+0.170 V versus SCE (saturated calomel electrode). Salicylate determination was carried out maintaining the ratio between beta-NADH and salicylate at 4:1 (30 degrees C). The amperometric response of the biosensor was linearly proportional to the salicylate concentration between 2.3x10(-6) and 1.4x10(-5) mol l(-1), in 0.1 mol l(-1) phosphate buffer (pH 7.8), containing 0.1 mol l(-1) KCl and 5.0x10(-4) mol l(-1) Na(2)H(2)EDTA, as supporting electrolyte. The recovery studies, in the presence of several interfering compounds, showed recoveries between 96.4 and 104.8%. The useful lifetime of the biosensor in the concentration range evaluated was at least 40 days, in continuous use. Blood serum samples analyzed by this biosensor showed a good correlation compared to the spectrophotometric method (Trinder) used as reference, presenting relative deviations lower than 7.0%.     

Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.     

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples

A rapid, simple and rugged procedure without requiring any prior sample treatment was developed for the determination of acetylsalicylic acid (ASA) in tablets formulations by solid-phase fluorescence spectroscopy. The method was carried out on powdered samples, consisting of an active substance dispersed in lactose, maize starch, talc and magnesium stearate. Previous knowledge of the sample bulk composition is needed for proper application of the method. Wavelengths for maximum excitation and emission were 288 and 318 nm, respectively, and the fluorescence intensity was linear with ASA concentration within the 50-170 mg g⁻¹ range. Detection and quantification limits were 2.2 and 7.3 mg g⁻¹, and the analytical frequency was 200 h⁻¹. For a typical sample, the relative standard deviation of results was estimated as 2.3% (n = 10). Accuracy was assessed by comparing the analytical results obtained with the proposed method with those related to a reference method recommended by British Pharmacopoeia: no differences between the methods were found at the 95% confidence level.     

Derivate von arsensubstituierten Phosphorchalkogeniden

Derivatives of Arsenic Substituted Phosphorus Chalcogenides α-AsP₃S₃I₂, α-AsP₃Se₃I₂, and three isomers of β-AsP₃S₃I₂ were observed besides several phosphorus sulfides by ³¹P NMR spectroscopy after the reaction of As_nP_4–nE₃ (E ? S; Se; n = 0–4) with I₂ in the melt or with I₂, PI₃, and N-iodosuccinimid in CS₂ solutions. The reaction of As_nP_4–nS₃ with CHI₃ in CS₂ solution yielded two isomers of β-AsP₃S₃(CHI₂)I.     

Nitric oxide photorelease from ruthenium salen complexes in aqueous and organic solutions

The complexes [Ru(salen)(NO)Cl] and [Ru(salen)(NO)(H(2)O)](+) were shown to release the nitrosyl ligand as nitric oxide upon exposure to visible light in organic and aqueous solutions respectively, by means of UV-visible, EPR, and FTIR spectroscopies. The former was prepared by a new synthetic route and had its structure determined by single-crystal X-ray diffraction. A crystal of the dichloromethane solvate is orthorhombic, space group Fdd2 (No. 43) and formula C(16)H(14)ClN(3)O(3)Ru.CH(2)Cl(2), with Z = 16 and cell parameters a = 25.489(4), b = 33.435(4), and c = 9.3716(9) A. The electronic absorption spectra of the complexes were calculated using the INDO/S method. The water-soluble complex is a potential drug for antitumoral phototreatment.     

Inclusion Complex between Local Anesthetic/2-hydroxypropyl-β-cyclodextrin in Stealth Liposome

The drugs delivery system in the treatment of diseases has advantages such as reduced toxicity, increased availability of the drug, etc. Therefore, studies of the supramolecular interactions between local anesthetics (LAs) butamben (BTB) or ropivacaine (RVC) complexed with 2-hydroxypropyl-β-cyclodextrin (HP-βCD) and carried in Stealth liposomal (SL) are performed. ¹H-NMR nuclear magnetic resonance (DOSY and STD) were used as the main tools. The displacements observed in the ¹H-NMR presented the complexion between LAs and HP-βCD. The diffusion coefficients of free BTB and RVC were 7.70 × 10⁻¹⁰ m² s⁻¹ and 4.07 × 10⁻¹⁰ m² s⁻¹, and in the complex with HP-βCD were 1.90 × 10⁻¹⁰ m² s⁻¹ and 3.64 × 10⁻¹⁰ m² s⁻¹, respectively, which indicate a strong interaction between the BTB molecule and HP-βCD (98.3% molar fraction and Ka = 72.279 L/mol). With STD-NMR, the encapsulation of the BTB/HP-βCD and RVC/HP-βCD in SL vesicles was proven. Beyond the saturation transfer to the LAs, there is the magnetization transfer to the hydrogens of HP-βCD. BTB and RVC have already been studied in normal liposome systems; however, little is known of their behavior in SL.     

Essential Conditions for the Full Synergy of Probability of Occurrence Distributions

In this contribution, we specify the conditions for assuring the validity of the synergy of the distribution of probabilities of occurrence. We also study the subsequent restriction on the maximal extension of the strict concavity region on the parameter space of Sharma–Mittal entropy measures, which has been derived in a previous paper in this journal. The present paper is then a necessary complement to that publication. Some applications of the techniques introduced here are applied to protein domain families (Pfam databases, versions 27.0 and 35.0). The results will show evidence of their usefulness for testing the classification work performed with methods of alignment that are used by expert biologists.