Critical parameters and optimization of a magnesium-selective liquid membrane electrode for application to human blood serum

Summary The selectivity of a new magnesium ionophore (ETH 7025) induced in membranes of different compositions is experimentally studied in view of the ion activities in human serum. The required selectivity coefficient against calcium for the application of an ion-selective magnesium electrode to human serum is calculated for the worst case. Other critical parameters for the application of a liquid PVC-based ion-selective membrane to undiluted human serum discussed are: the sensor lifetime which is related to the lipophilicity of the carrier as well as the ruggedness of the membrane against interactions with components of the relatively lipophilic sample.     

Cobalt blood levels after total hip replacement (THR): a new follow-up study in Trieste (Italy)

Cobalt and chromium release in patients undergone a metal-on-metal total hip replacement (THR) is a matter recently discussed and whose we do not have enough information about it yet. In literature there is little data and not completely indicative, in the biological fluids and organs the amounts of released metals are different. This is also due to the fact that cobalt and chromium blood levels can change depending on physical and working activity, individual feeding and metabolism. The results obtained confirm the presence of an increase of cobalt inthe blood of patients after total hip replacement, while the chromium levels are almost alike: average values in patients operated are 4.1 +/- 1.5 microg/L for cobalt (0.3 +/- 0.1 microg/L in the control group) and 4.5 +/- 2.9 microg/L for chromium (4.7 +/- 2.4 microg/L in the control group). In spite of the cobalt values stand below the concentration generally considered dangerous, the difference between the two examined groups points out that a risk exists for the health of these patients. These results must be confirmed by further studies, providing better information and more reliable and biocompatible materials.     

Carbocyclische Verbindungen aus Monosacchariden. I. Umsetzungen in der glucosereihe

Carbocyclic Compounds from Monosaccharides. 1. Transformations in the Glucose Series A method for the preparation of pentasubstituted cyclopentanes from monosaccharides is presented, involving two crucial steps, viz. the reductive fragmentation of 5-bromo-5-deoxyglucosides (such as 10, 17 and 23 , see Scheme 3) with Zn or butyl lithium yielding 5,6-dideoxy-hex-5-enoses (such as 11 and 24 , see Schemes 3 and 4), and the subsequent cyclization of these hexenoses with N-methyl- or N-(alkoxyalkyl)hydroxylamines (via the corresponding nitrones) to form cyclopentano-isoxazolidines (see Scheme 2). Thus, the glucosides 17 and 23 were converted diastereoselectively and in good yields into the cyclopentano-isoxazolidines 27 and 45 (Schemes 5 and 7), which were characterized by their transformation into various derivatives. 27 and 45 were correlated through the common derivative 62 . The configuration of the cyclization products were established by pyrolysis of the N-oxide 65 to the enol ether 67 (Scheme 10).     

Preparation d'esters par deshydrogenation d'alcools primaires en phase liquide catalysee par l'oxyde de cuivre - observations preliminaires

Linear primary alcohols with at least 7 carbon atoms are quite quantitatively transformed in esters, by CuO, at temperatures > 170°, without air in liquid phase. Preponderant influence of carbon in position 2 is evidenced. In the same conditions lactones are obtained from diols, and benzylic alcohols undergoes, by hydride transfer, a disproportionation into toluene, benzaldehyde and water.     

Rapid determination of orotic acid in urine by a fast liquid chromatography/tandem mass spectrometric method

Quantification of orotic acid (uracil-6-carboxylic acid) in urine is an important tool to diagnose some inherited diseases, such as urea cycle disorder (OTCD) and hereditary orotic aciduria. New rapid analytical methods are necessary to provide high-throughput orotic acid analyses. A new analytical method has been developed for the rapid analysis of orotic acid in urine by liquid chromatography coupled with ion spray tandem mass spectrometry (LC/MS/MS). After a sample dilution 1:20, the analysis was performed in the selected reaction monitoring mode in which orotic acid was detected through the transition m/z 155 to 111. The retention time was 3.9 min in a 4.5-min analysis. Daily calibration between 0.5-5.0 micromol/L of orotic acid, corresponding to 10-100 micromol/L in urine before the 1:20 dilution, offered consistent linearity and reproducibility. Interassay coefficient of variance (c.v.) was 4.97% at a mean concentration of 10.99 micromol/L. The sensitivity and specificity of tandem mass spectrometry permitted a high volume of analyses of orotic acid. The sample preparation is simple, inexpensive and not time demanding.     

Analogues of Sialic Acids as Potential Sialidase Inhibitors Synthesis of 2-C-Hydroxymethyl Derivatives of N-Acetyl-6-amino-2,6-dideoxy-neuraminic Acid

The intramolecular cycloaddition of the previously described azidoalkene 16 , the related diacetates 7 and 13 , and the monoacetate 8 led diastereoselectivity to the (2R)- and (2S)-configurated hydropyridotriazoles 17 , 9 and 11 , 14 and 15 , and 10 and 12 , respectively (Scheme 1). Thermolysis of 16 gave also the aziridine 18 , its proportion increasing with reaction time. The diastereoselectivity of the cycloaddition- is rationalized on the basis of steric interactions and of H? bonds in the transition state. Photolysis in benzene partially transformed 9 into the aziridine 19 . Treatment of 9 with aqueous AcOH gave 19 and the tetrahydrofuran 20 , with AcOH in benzene 20 and the triacetate 23 , and with aqueous H₂SO₄ in THF, the primary alcohol 22 (room temperature) or 19 and 22 (0°). Deacetylation of 9 followed by reaction with pyridinium hydrochloride led to the tetrahydrofuran 21 and the chloride 24 (Scheme 2). The diacetate 22 and the triacetate 23 gave the tripl 25 which was deprotected to 26 . Reduction of the keto-aziridine 18 (NaBH₄) gave the alcohols 27 and 29 which were acetylated to give 28 and 19 , respectively (Scheme 3). Treatment of the aziridine 28 with AcOH in benzene followed by deacetylation gave 30 and hence 31 . AcOH in benzene transformed the triazoline 15 first into the aziridine 32 and hence into 33 , which was deprotected to give the triol 34 and hence 35 . The 2-(hydroxymethyl)piperidines 26 , 31 , and 35 inhibited Vibrio cholerae sialidase with K₁ = 3.8 · 10^?2 M, 3.4 · 10^?3 M, and 1.5 · 10^?4 M, respectively. The conformation of the glycerol side chain of these compounds and of the unbranched piperidines 2–4 deviates from the one of Neu5Ac (and Neu2en5Ac). This finding is rationalized by an H-bond between OH? C(8) and NH? C(6). The conformations and the K₁ values of 26 , 31 , and 35 correlate with each other.     

Wavy graphene sheets from electrochemical sewing of corannulene

The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.

A bottom-up synthesis of wavy graphene structures obtained through an anodic polymerization process, combined with an electrochemically triggered oxidative cyclodehydrogenation, of the bowl-shaped polyaromatic hydrocarbon corannulene.     

Synthesis of mesoporous carbons using ordered and disordered mesoporous silica templates and polyacrylonitrile as carbon precursor

Mesoporous carbons were synthesized from polyacrylonitrile (PAN) using ordered and disordered mesoporous silica templates and were characterized using transmission electron microscopy (TEM), powder X-ray diffraction, nitrogen adsorption, and thermogravimetry. The pores of the silica templates were infiltrated with carbon precursor (PAN) via polymerization of acrylonitrile from initiation sites chemically bonded to the silica surface. This polymerization method is expected to allow for a uniform filling of the template with PAN and to minimize the introduction of nontemplated PAN, thus mitigating the formation of nontemplated carbon. PAN was stabilized by heating to 573 K under air and carbonized under N2 at 1073 K. The resulting carbons exhibited high total pore volumes (1.5-1.8 cm3 g(-1)), with a primary contribution of the mesopore volume and with relatively low microporosity. The carbons synthesized using mesoporous templates with a 2-dimensional hexagonal structure (SBA-15 silica) and a face-centered cubic structure (FDU-1 silica) exhibited narrow pore size distributions (PSDs), whereas the carbon synthesized using disordered silica gel template had broader PSD. TEM showed that the SBA-15-templated carbon was composed of arrays of long, straight, or curved nanorods aligned in 2-D hexagonal arrays. The carbon replica of FDU-1 silica appeared to be composed of ordered arrays of spheres. XRD provided evidence of some degree of ordering of graphene sheets in the carbon frameworks. Elemental analysis showed that the carbons contain an appreciable amount of nitrogen. The use of our novel infiltration method and PAN as a carbon precursor allowed us to obtain ordered mesoporous carbons (OMCs) with (i) very high mesopore volume, (ii) low microporosity, (iii) low secondary mesoporosity, (iv) large pore diameter (8-12 nm), and (v) semi-graphitic framework, which represent a desirable combination of features that has not been realized before for OMCs.