Study on the Synthesis of ZnO Nanoparticles Using Azadirachta indica Extracts for the Fabrication of a Gas Sensor

This paper compared the effects of A. indica plant proteins over chemical methods in the morphology of zinc oxide nanoparticles (ZnO NPs) prepared by a co-precipitation method, and ethanol sensing performance of prepared thin films deposited over a fluorene-doped tin oxide (FTO) bind glass substrate using spray pyrolysis technique. The average crystallite sizes and diameters of the grain-sized cluster ZnO NPs were 25 and (701.79 ± 176.21) nm for an undoped sample and 20 and (489.99 ± 112.96) nm for A. india dye-doped sample. The fourier transform infrared spectroscopy (FTIR) analysis confirmed the formation of the Zn–O bond at 450 cm⁻¹, and also showed the presence of plant proteins due to A. indica dye extracts. ZnO NPs films exhibited good response (up to 51 and 72% for without and with A. indica dye-doped extracts, respectively) toward ethanol vapors with quick response-recovery characteristics at a temperature of 250 °C for undoped and 225 °C for A. indica dye-doped ZnO thin films. The interaction of A. indica dye extracts helps to decrease the operating temperature and increased the response and recovery rates of the sensor, which may be due to an increase in the specific surface area, resulting in adsorption of more oxygen and hence high response results.     

Asymmetric synthesis of the C1–C6 portion of the psymberin using an Evans chiral auxiliary

The C1–C6 region of the potent cytotoxic agent psymberin has been synthesized. The key transformations of the synthesis are an auxiliary-controlled addition of a Sn(II)-glycolate enolate to an aldehyde to yield the anti-aldol product and transforming the primary alcohol into a terminal olefin utilizing organoselenium chemistry.     

One pot synthesis of diarylpyrido[3,2‐c]coumarins

Various diarylpyrido[3,2‐c]coumarins 3a‐l have been synthesized in one step by reacting 4‐hydroxy coumarins 1a‐d with α,β‐unsaturated ketones 2a‐c in the presence of ammonium acetate and acetic acid under Kroehnke's reaction conditions.     

Enhancing the Aspirin Loading and Release Efficiency of Silver Oxide Nanoparticles Using Oleic Acid-based Bio-Surfactant from Enteromorpha intestinalis

This study is an attempt to improve the loading and release potential of silver oxide nanoparticles (AgO NPs) using Oleic acid based bio-surfactant isolated from Enteromorpha instestinalis. The isolated Oleic acid based bio-surfactant was characterized using GC–MS, NMR, and HPLC. The AgO NPs were then surface-functionalized with the bio-surfactant and analyzed using XRD, HR-TEM/SAED, DLS, UV–Vis, and FTIR spectroscopy to evaluate the loading of aspirin and functional groups responsible for loading. The model drug Aspirin that has depreciated bio-availability due to poor solubility was used to test the drug carrier efficiency of the AgO NPs after the surface-functionalization. The loading of aspirin was increased by up to 80% in bio-surfactants than PEG-coated NPs (72%) at a 1:1 ratio (Aspirin/NP). The drug release profile of aspirin was evaluated by dialysis at different acidic conditions (pH 1.2, 6.8, and 7.4) and the active release of aspirin was observed in pH 6.8 and bio-surfactant produced better release than PEG and commercial tablet in all the pH conditions. To identify the mechanism of release from the carrier, the release kinetics was studied using zero-order, first-order, Higuchi's, and Korsmeyer Peppas equations and found that the release was time-dependent and non-fickian.     

Nanowear studies in chemically heterogeneous responsive polymeric brushes by surface force microscopy

In this study, we present nanowear studies using surface force microscopy (SFM), on nanoscopic thin films of reversibly switchable binary polymer brushes [polystyrene (PS) + poly(2-vinylpyridine) (P2VP)] and respective monobrushes [polystyrene and poly(2-vinylpyridine)] synthesized via “grafting to” method. The aim was to tune the wear in nanothin polymer brush surfaces. Therefore, the effect of conformational switching of PS + P2VP brush on treatment with selective solvents for PS and P2VP chains on the wear process was investigated. Wear process on thick spin-coated films of PS and P2VP was also investigated for comparison. Nanowear experiments were performed using SFM tip by repeating scans over the surface to follow the wear process closely. The wear process on different surfaces was explained on the basis of molecular entanglement as well as adhesion and friction on the sample surface. For spin-coated PS film as well as PS and PS + P2VP brush surfaces (treated with toluene) with molecular entanglements at surface, wear mechanism involved formation of ripples. However, in case of spin-coated P2VP films as well as P2VP and PS + P2VP brush surfaces (treated with ethanol) with no molecular entanglements at surface, wear occurred via removal of polymer chains and their accumulation at the rim. For PS + P2VP surface treated with acidic water, wear mechanism was complex and inhomogeneous ripple formation was followed by formation of heaps of polymeric material in the center of scanned area. The extent of wear as measured either by root mean square roughness of the surface or spacing between the ripples, increased with the number of scans for all the surfaces. Our study shows that wear mode of polymer brush surfaces is different for different polymers and can be controlled/tuned by the use of binary polymer brushes.     

A rapid and specific approach for direct measurement of donepezil concentration in human plasma by LC-MS/MS employing solid-phase extraction

A selective, rapid and simple liquid chromatography-tandem mass spectrometry (LC-MS/MS) method is described for assay of donepezil in human plasma using escitalopram as an internal standard. Chromatographic separation was achieved on a Betabasic-C(8), 5 microm, 100 x 4.6 mm column using methanol:water:formic acid (90:9.97:0.03, v/v/v) as mobile phase. Detection of donepezil and internal standard was achieved by ESI MS/MS in positive ion mode using 380.20/91.10 and 325.13/262.00 transitions, respectively. The linearity over the concentration range of 0.15-50 ng/mL for donepezil was obtained and the lower limit of quantification was 0.15 ng/mL. For each level of quality control samples, inter-day and intra-day precisions (RSD) were < or =8.92 and 10.35% and accuracy (%RE) were < or =7.33% and 9.33%, respectively. The recovery was more than 88.50% for both donepezil and internal standard by solid-phase extraction, eliminating evaporation and reconstitution steps.     

Electrochemical studies of few-layered graphene as an anode material for Li ion batteries

Few-layered graphene (FLG) with specific surface area of only ~8.2 m² g^?1 was synthesized from graphene oxide (GO) using microwave-assisted exfoliation. GO was prepared using modified Hummers method. Few-layered nature of the exfoliated material was confirmed by electron microscopy, X-ray and electron diffraction, and Raman spectroscopy. Coin cells were fabricated using FLG as an anode and lithium metal as a counter electrode. The cells were tested using cyclic voltammetry and galvanostatic cycling techniques. FLG showed reversible capacity values of ~400 and ~250 mAh g^?1 at current rates of 0.1 and 1 C, respectively. Columbic efficiency was more than 98 % while cycle to cycle capacity fading was less than 2 %. Maximum discharge or charging capacity was below 0.3 V, a preferable characteristic for achieving ideal anodic behavior.     

Photochemical isomerization of norbornadiene‐containing polytriazoles obtained by click chemistry polyaddition

Polyesters and polyethers containing norbornadiene (NBD) and 1,2,3‐triazole units in the main chain are prepared by step growth polymerization of diester or diether NBD‐based dialkynes with different aromatic diazides using copper‐catalyzed azide–alkyne cycloaddition. The solubility and the physical properties of the resulting polytriazoles are investigated by differential scanning calorimetry, thermogravimetric analysis, size exclusion chromatography, and ¹H NMR spectroscopy, and are discussed taking into account of the chemical structures of the monomers. All of them are amorphous with glass transition temperatures ranging from 51 to 117 °C, number average molecular weight (M_n) values from 16 to 43 kDa and thermal degradation (T_d10) values from 175 to 292 °C. The photochemical valence isomerization (PVI) of the NBD units into quadricyclanes (QC) is investigated using UV–vis spectroscopy of polymer films spin‐coated onto quartz substrates. For the first time the PVI of NBD into QC is demonstrated by ¹H NMR spectroscopy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 223–231     

Helical Packing of Nanoparticles Confined in Cylindrical Domains of a Self‐Assembled Block Copolymer Structure

Theoretical models predict that a variety of self‐assembled structures of closely packed spherical particles may result when they are confined in a cylindrical domain. In the present work we demonstrate for the first time that the polymer‐coated nanoparticles confined in the self‐assembled cylindrical domains of a block copolymer pack in helical morphology, where we can isolate individual fibers filled with helically arranged nanoparticles. This finding provides unique possibilities for fundamental as well as application‐oriented research in similar directions.     

Energy-dependent disassembly of self-assembled SNARE complex: observation at nanometer resolution using atomic force microscopy

Full-length v-SNARE protein reconstituted in lipid vesicles, when exposed to t-SNARE-reconstituted lipid membrane, results in the self-assembly of a t-/v-SNARE complex in a ring pattern, forming pores and the establishment of continuity between the opposing bilayers. In contrast, when v-SNARE protein alone (without liposomes) is exposed to t-SNARE-reconstituted lipid membrane, they also self-assemble to form t-/v-SNARE complexes, although such complexes fail to possess the characteristic ring pattern, nor do they help in the establishment of continuity between the opposing bilayers. Hence, t-SNAREs and v-SNARE need to be membrane-associated to interact in a circular array to form conducting pores in the presence of calcium. This study demonstrates that, irrespective of their arrangement, both forms of the SNARE complex can be disassembled in the presence of NSF-ATP.