Fundamental Methods for the Phase Transfer of Nanoparticles

The utilization of nanoparticles for a variety of applications has raised much interest in recent years as new knowledge has emerged in nanochemistry. New and diverse methods for synthesis, characterization, and application of these particles have been discovered with differing degrees of ease and reproducibility. Post-synthetic modification of nanoparticles is often a required step to facilitate their use in applications. The reaction conditions and chemical environment for the nanoparticle synthesis may not support or may conflict with further reactions. For this reason, it is beneficial to have phase transfer methods for nanoparticles to allow for their dispersion in a variety of solvents. Phase transfer methods are often limited in the types and sizes of particles that can be effectively dispersed in an immiscible solvent. Currently, general transfer methods for a wide variety of nanoparticles have not been identified. New routes for phase transfer allow for utilization of a larger range of particles in applications which were previously limited by solubility and reactivity issues. In this work, we will describe the fundamental methods for the phase transfer of metallic nanoparticles. We will look at the major problems and pitfalls of these methods. The applications of phase transfer will also be reviewed, mainly focusing on catalysis and drug delivery.     

Metallosurfactant Schiff base cobalt(III) coordination complexes. Synthesis,characterization, determination of CMC values and biological activities

Twelve surfactant Schiff base ligands were synthesized from salicylaldehyde and its chloro-, bromo- and methoxy- derivatives by condensation with long-chain aliphatic primary amines, and a number of mixed ligand cobalt(III) surfactant Schiff base coordination complexes of the type [Co(trien)A]²⁺ were synthesized from the corresponding dihalogeno complexes by ligand substitution. The Schiff bases and their complexes were characterized by physico-chemical and spectroscopic methods. The complexes form foams in aqueous solution upon shaking. The critical micelle concentration (CMC) values of the complexes in aqueous solution were obtained from conductance measurements. Specific conductivity data (at 303–323 K) served for the evaluation of the thermodynamics of micellization ( \Updelta G_\textm⁰ \Updelta G_{\text{m}}^{0} , \Updelta H_\textm⁰ \Updelta H_{\text{m}}^{0} , \Updelta S_\textm⁰ \Updelta S_{\text{m}}^{0} ). The complexes were tested for its antimicrobial activity.     

Effect of antimony addition on the thermal and electrical-switching behavior of bulk Se-Te glasses

The thermal properties and electrical-switching behavior of semiconducting chalcogenide Sb_xSe_55−xTe₄₅ (2 ? x ? 9) glasses have been investigated by alternating differential scanning calorimetry and electrical-switching experiments, respectively. The addition of Sb is found to enhance the glass forming tendency and stability as revealed by the decrease in non-reversing enthalpy ΔH_nr, and an increase in the glass-transition width ΔT_g. Further, the glass-transition temperature of Sb_xSe_55−xTe₄₅ glasses, which is a measure of network connectivity, exhibits a subtle increase, suggesting a meager network growth with the addition of Sb. The crystallization temperature is also observed to increase with Sb content. The Sb_xSe_55−xTe₄₅ glasses (2 ? x ? 9) are found to exhibit memory type of electrical switching, which can be attributed to the polymeric nature of network and high devitrifying ability. The metallicity factor has been found to dominate over the network connectivity and rigidity in the compositional dependence of switching voltage, which shows a profound decrease with the addition of Sb.     

Substituent effects in double-helical hydrogen-bonded AAA-DDD complexes

Two series of DDD and AAA hydrogen-bond arrays were synthesized that form triply-hydrogen-bonded double-helical complexes when combined in CDCl(3) solution. Derivatization of the DDD arrays with electron-withdrawing groups increases the complex association constants by up to a factor of 30 in those arrays examined. Derivatization of the AAA arrays with electron donating substituents reveals a similar magnitude effect on the complex stabilities. The effect of substitution on both types of arrays are modeled quite satisfactorily (R(2) > 0.96 in all cases) as free energy relationships with respect to the sums of their Hammett substituent constants. In all, the complex stabilities can be manipulated over more than three orders of magnitude (>20 kJ mol(-1)) using this type of modification.     

New Chemodosimetric Reagents as Ratiometric Probes for Cysteine and Homocysteine and Possible Detection in Living Cells and in Blood Plasma

In this work, we have rationally designed and synthesized two new reagents ( L₁ and L₂ ), each bearing a pendant aldehyde functionality. This aldehyde group can take part in cyclization reactions with β‐ or γ‐amino thiols to yield the corresponding thiazolidine and thiazinane derivatives, respectively. The intramolecular charge‐transfer (ICT) bands of these thiazolidine and thiazinane derivatives are distinctly different from those of the molecular probes ( L₁ and L₂ ). Such changes could serve as a potential platform for using L₁ and L₂ as new colorimetric/fluorogenic as well as ratiometric sensors for cysteine (Cys) and homocysteine (Hcy) under physiological conditions. Both reagents proved to be specific towards Cys and Hcy even in the presence of various amino acids, glucose, and DNA. Importantly, these two chemodosimetric reagents could be used for the quantitative detection of Cys present in blood plasma by using a pre‐column HPLC technique. Such examples are not common in contemporary literature. MTT assay studies have revealed that these probes have low cytotoxicity. Confocal laser scanning micrographs of cells demonstrated that these probes could penetrate cell membranes and could be used to detect intracellular Cys/Hcy present within living cells. Thus, the results presented in this article not only demonstrate the efficiency and specificity of two ratiometric chemodosimeter molecules for the quantitative detection of Cys and Hcy, but also provide a strategy for developing reagents for analysis of these vital amino acids in biological samples.     

Monomer reactivity ratios for acrylonitrile–methyl acrylate free‐radical copolymerization

Nonlinear monomer reactivity ratios for the homogeneous free‐radical copolymerization of acrylonitrile and methyl acrylate were determined from ¹H NMR and real‐time Fourier transform infrared (FTIR) analyses. All ¹H NMR data were obtained on polymers isolated at low conversions (<10%), whereas the FTIR data were collected in situ. The copolymerizations were conducted in N,N‐dimethylformamide at 62 °C and were initiated with azobisisobutyronitrile. The real‐time FTIR technique allowed for many data points to be collected for each feed composition, which enabled the calculation of copolymer compositions (dM₁/dM₂) with better accuracy. Monomer reactivity ratios were estimated with the Mayo–Lewis method and then were refined via a nonlinear least‐squares analysis first suggested by Mortimer and Tidwell. Thus, monomer reactivity ratios at the 95% confidence level were determined to be 1.29 ± 0.2 and 0.96 ± 0.2 for acrylonitrile and methyl acrylate, respectively, which were valid under the specific system conditions (i.e., solvent and temperature) studied. The results are useful for the development of acrylonitrile (<90%) and methyl acrylate, melt‐processable copolymer fibers and films, including precursors for carbon fibers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2994–3001, 2004     

Poly(ether ether ketone)/poly(aryl ether sulfone) blends: Melt rheological behavior

Dynamic rheological measurements were carried out on blends of poly(ether ether ketone) (PEEK)/poly(aryl ether sulfone) (PES) in the melt state in the oscillatory shear mode. The data were analyzed for the fundamental rheological behavior to yield insight into the microstructure of PEEK/PES blends. A variation of complex viscosity with composition exhibited positive–negative deviations from the log‐additivity rule and was typical for a continuous‐discrete type of morphology with weak interaction among droplets. The point of transition showed that phase inversion takes place at composition with a 0.6 weight fraction of PEEK, which agreed with the actual morphology of these blends observed by scanning electron microscopy. Activation energy for flow, for blend compositions followed additive behavior, which indicated that PEEK/PES blends may have had some compatibility in the melt. Variation of the elastic modulus (G′) with composition showed a trend similar to that observed for complex viscosity. A three‐zone model used for understanding the dynamic moduli behavior of polymers demonstrated that PEEK follows plateau‐zone behavior, whereas PES exhibits only terminal‐zone behavior in the frequency range studied. The blends of these two polymers showed an intermediate behavior, and the crossover frequency shifted to the low‐frequency region as the PEEK content in PES increased. This revealed the shift of terminal‐zone behavior to low frequency with an increased PEEK percentage in the blend. Variation of relaxation time with composition suggested that slow relaxation of PEEK retards the relaxation process of PES as the PEEK concentration in the blend is increased because of the partial miscibility of the blend, which affects the constraint release process of pure components in the blend. A temperature‐independent correlation observed in the log–log plots of G′ versus loss modulus (G″) for different blend systems fulfilled the necessary condition for their rheological simplicity. Further, the composition‐dependent correlations of PEEK/PES blends observed in a log–log plot of G′ versus G″ showed that the blends are either partially miscible or immiscible and form a discrete‐continuous phase morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1548–1563, 2004     

An expeditious convergent synthesis of a dibromotyrosine alkaloid inhibitor of mycothiol-S-conjugate amidase

A quick, economic synthesis of the alkaloid 1, an inhibitor of mycothiol-S-conjugate amidase (MCA) is reported. Starting from low-cost, commercially available 4-hydroxybenzaldehyde, the nine-step synthesis involved dibromination and coupling with N-acetylglycine to give a stable methyloxazole intermediate 5 which was hydrolyzed, oximated and coupled to agmatine to yield the oxime in ∼30% overall yield. It was not necessary to protect the oxime in the synthetic sequence thereby circumventing a deprotection step.     

A General Method for the Synthesis of 11-Deoxyanthracyclinones

A general method for the synthesis of 11-deoxyanthracyclinones is described.     

Pd-NHC catalyzed cyclopentannulation of diazabicyclic alkenes with ortho-aryl halides

Pd-NHC catalyzed cyclopentannulation of diazabicyclic alkenes with ortho- functionalized aryl halides is described. In all the reactions, a single diastereomer of the cyclopentannulated product is observed, and this reaction is very efficient under microwave irradiation.