The impact of metrological traceability on the validity of creatinine measurement as an index of renal function

When the calibration of a routine measurement procedure is traced back to metrological higher order, a significant discrepancy can occur between the analytical conditions of the routine measurement and the analytical conditions that were used in the clinical studies upon which the decision-making criteria are based. This can lead to serious interpretation errors with possible dramatic consequences for patients. The calibration of the creatinine Jaffé method is an excellent example of the importance of medical traceability. The compensated Jaffé method correlated accurately with the reference method and the compensated Jaffé creatinine clearance (CrCl), Cockroft and Gault and MDRD with the ⁵¹Cr EDTA clearance. The Schwartz estimate based upon the compensated Jaffé and enzymatic method overestimated, while uncompensated Jaffé slightly underestimated glomerular filtration rate (GFR). The situation in children is complex since serum creatinine concentrations are much lower in infants, rendering tubular secretion relatively more important. Low-molecular weight proteins have been suggested to replace serum creatinine as a marker for GFR. -trace protein, cystatin C, and ₂-microglobulin showed good correlation with GFR. However, care should be taken in patients presenting with some malignant tumors, since significant increases of cystatin C in patients with metastatic melanoma or colorectal cancer has been reported.Presented at the 9th Conference on Quality in the Spotlight, 18-19 March 2004, Antwerp, Belgium     

Tuning intermolecular interactions in a rodlike polymer assembled at surfaces and in solution

The isolation of single polyelectrolyte chains of water-soluble poly(isocyanodipeptide)s (PICs) bearing carboxylic acid terminated side chains occurring both at surfaces and in solution was accomplished by reducing the intermolecular interactions through complexation with cations or positively charged surfactants.Scanning force microscopy and viscosity analyses revealed that this method allows to tune the conformation of the macromolecule, which is of importance for tailoring the physicochemical properties of the material.This is particularly significant for the use of these polymer chains as seed for biomineralization processes.     

A comparison of boundary element and finite element methods for modeling axisymmetric polymeric drop deformation

A modified boundary element method (BEM) and the DEVSS‐G finite element method (FEM) are applied to model the deformation of a polymeric drop suspended in another fluid subjected to start‐up uniaxial extensional flow. The effects of viscoelasticity, via the Oldroyd‐B differential model, are considered for the drop phase using both FEM and BEM and for both the drop and matrix phases using FEM. Where possible, results are compared with the linear deformation theory. Consistent predictions are obtained among the BEM, FEM, and linear theory for purely Newtonian systems and between FEM and linear theory for fully viscoelastic systems. FEM and BEM predictions for viscoelastic drops in a Newtonian matrix agree very well at short times but differ at longer times, with worst agreement occurring as critical flow strength is approached. This suggests that the dominant computational advantages held by the BEM over the FEM for this and similar problems may diminish or even disappear when the issue of accuracy is appropriately considered. Fully viscoelastic problems, which are only feasible using the FEM formulation, shed new insight on the role of viscoelasticity of the matrix fluid in drop deformation. Copyright © 2001 John Wiley & Sons, Ltd.     

Development of reference materials for microbiological analysis

The reliability of reference materials (RMs) depends on properties such as fitness, robustness, commutability, stability and homogeneity. The development of RMs for microbiological analysis is especially challenged through questions around the stabilisation and recovery of viable cells, the dispersion of precise numbers of cells, matrix effects and, when using molecular techniques, the presence of nucleic acids (e.g. DNA) of dead and live target organisms. However, RMs are indispensable tools for quality control in microbiological analysis. The Institute for Reference Materials and Measurements (IRMM), as part of the European Commission, concentrates its efforts on the development of RMs to support the development, implementation and monitoring of EU legislation. A special focus is given to highly precise RMs for presence/absence and enumeration tests in microbiological food and water analysis. Another group of new RMs certified by the IRMM comprise DNA-based materials to control the identity of micro-organisms in qualitative assays. All of these activities serve to improve quality control in microbiological analysis. Presented at ‘BERM-10’, April 2006, Charleston, SC, USA.     

Direct chlorine determination in crude oils by energy dispersive X-ray fluorescence spectrometry: An improved method based on a proper strategy for sample homogenization and calibration with inorganic standards

Official guidelines to perform chlorine determination in crude oil are (i) American Society for Testing and Materials (ASTM) D6470, which is based on the extraction of water from the oil and subsequent determination of the chloride by potentiometry, (ii) ASTM D3230, that measures the conductivity of a solution of crude oil in a mixture of organic solvents and (iii) US Environmental Protection Agency (EPA) 9075 that uses energy dispersive X-ray fluorescence spectrometry to quantify chlorine and it is applicable for the range from 200 μg g^− 1 to percent levels of the analyte. The goal of this work is to propose method to quantify lower amounts of chlorine in crude oil using energy dispersive X-ray fluorescence spectrometry using a simple calibration strategy. Sample homogenization procedure was carefully studied in order to enable accurate results. The calibration curve was made with standards prepared by diluting aqueous NaCl standard in glycerin. The method presented a linear response that covers the range from 8 to at least 100 μg g^− 1 of chlorine. Chlorine in crude oil samples from Campos Basin - Brazil were quantified by the proposed method and by potentiometry after extraction of chlorine from the oil. Results achieved using both methods were statistically the same at 95% confidence level.     

The porosity, acidity, and reactivity of dealuminated zeolite ZSM-5 at the single particle level: the influence of the zeolite architecture

A combination of atomic force microscopy (AFM), high‐resolution scanning electron microscopy (HR‐SEM), focused‐ion‐beam scanning electron microscopy (FIB‐SEM), X‐ray photoelectron spectroscopy (XPS), confocal fluorescence microscopy (CFM), and UV/Vis and synchrotron‐based IR microspectroscopy was used to investigate the dealumination processes of zeolite ZSM‐5 at the individual crystal level. It was shown that steaming has a significant impact on the porosity, acidity, and reactivity of the zeolite materials. The catalytic performance, tested by the styrene oligomerization and methanol‐to‐olefin reactions, led to the conclusion that mild steaming conditions resulted in greatly enhanced acidity and reactivity of dealuminated zeolite ZSM‐5. Interestingly, only residual surface mesoporosity was generated in the mildly steamed ZSM‐5 zeolite, leading to rapid crystal coloration and coking upon catalytic testing and indicating an enhanced deactivation of the zeolites. In contrast, harsh steaming conditions generated 5–50 nm mesopores, extensively improving the accessibility of the zeolites. However, severe dealumination decreased the strength of the Brønsted acid sites, causing a depletion of the overall acidity, which resulted in a major drop in catalytic activity.