Ferrofluid catalyzed water gas shift reaction to give carbon-dioxide and hydrogen

A ferrofluid consisting of colloidally dispersed magnetite particles in water was found to be an efficient selective catalyst for water gas shift reaction at 15–25 atmosphere of CO pressure in the temperature range of 423–553 K where the products obtained were only CO₂ and H₂. The reaction was studied as a function of variation of the concentration of catalyst, pressure of CO gas and temperature. Kinetic parameters suggested a mechanism involving first order dependence in CO and catalyst concentrations.     

A simple sample pretreatment device with supported liquid membrane for direct injection of untreated body fluids and in‐line coupling to a commercial CE instrument

A simple sample pretreatment device was developed employing extractions across supported liquid membranes (SLMs) and in‐line coupling to a commercial CE instrument. The device consisted of two polypropylene conical units interspaced with a polypropylene planar SLM, which were impregnated with 1‐ethyl‐2‐nitrobenzene. The two units and the SLM were pressed against each other, donor unit was filled with 40 μL of an untreated body fluid and acceptor unit with 40 μL of DI water. The device was then placed into conventional CE vial fitted with a soft spring, which was depressed during injection into CE capillary and ensured that the SLM was not ruptured. Position of separation capillary injection end and high‐voltage electrode in the CE instrument was optimized in order to ensure efficient injection of pretreated body fluids. The device can be easily assembled/disassembled and SLMs can be replaced after each extraction thus minimizing sample carry‐over, avoiding tedious SLM regeneration, and reducing total pretreatment time and costs. The pretreatment device was examined by direct injection of human urine and serum spiked with nortriptyline, haloperidol, and loperamide. The basic drugs were diffusionaly transported across the SLM within 10 min and were injected into the separation capillary directly from the SLM surface in the acceptor unit, whereas matrix components were retained by the SLM. The in‐line SLM‐CE method showed good repeatability of peak areas (3.8–11.0%) and migration times (below 1.4%), linear relationship (r² = 0.990–0.999), and low LODs (12–100 μg/L).     

Effect of polymer molecular weight on the fiber morphology of electrospun mats

In this work, different fractions of solvent-induced polymer degraded solution were mixed with freshly prepared solution of same polymer, and its effect on fiber morphology of electrospun mats was investigated. Nylon-6 solution in formic acid was allowed to degrade for 3 weeks and different fractions of it were mixed with freshly prepared nylon-6 solution to get the electrospun mats. FE-SEM images of the mats indicated that the a large amount of sub-nanofibers (<50 nm in diameter) in the form of spider-net like structures were achieved by tailoring the amount of solvent degraded polymer solution in the freshly prepared nylon-6 solution. Large quantity of these ultrafine sub-nanofibers present in electrospun nylon-6 mats could increase its hydrophilicity and mechanical strength. The decreased average pore diameter and increased BET surface area of the mat, caused by spider-net like structure, can make it as a potential candidate for air/water filtration.     

Efficacy of zinc and tourmaline in mitigating corrosion of carbon steel in non-flow mode

Laboratory corrosion immersion tests were carried out to investigate the effectiveness of a physical water treatment (PWT) using zinc and ceramic tourmaline-based catalytic materials for the control of carbon steel corrosion in acidic still water (i.e., pH 4.5–5). The tests were carried out at different water temperatures over 168 h. Our results showed a maximum of 22 % reduction in the corrosion rate using PWT in comparison with the control case. Furthermore, the corrosion products depicted more agglomerated particles after the PWT treatment. In both cases, differences were observed in the crystal structures, showing in general lower corrosion activity when PWT was used. The present results could find potential applications in water distribution systems and where metallic materials are exposed to stagnant acidic water.     

Residence time distribution study in a pilot-scale gas–solid fluidized bed reactor using radiotracer technique

This paper describes a radiotracer study carried out to measure residence time distribution (RTD) of coal particles in a pilot-scale gas–solid fluidized bed reactor (FBR). Gold-198 labelled on coal particles was used as radiotracer. RTD measurements were conducted for selected operating conditions and mean residence times (MRTs) of the coal particles were determined. Gamma function model was used to simulate the measured RTD data and mixing of coal particles in the reactor was investigated. Based on the results, the performance of the air distributor used in the reactor was evaluated.     

3D QSAR and molecular docking studies of benzimidazole derivatives as hepatitis C virus NS5B polymerase inhibitors

The urgent need for novel HCV antiviral agents has provided an impetus for understanding the structural requisites of NS5B polymerase inhibitors at the molecular level. Toward this objective, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) of 67 HCV NS5B polymerase inhibitors were performed using two methods. First, ligand-based 3D QSAR studies were performed based on the lowest energy conformations employing the atom fit alignment method. Second, receptor-based 3D QSAR models were derived from the predicted binding conformations obtained by docking all NS5B inhibitors at the allosteric binding site of NS5B (PDB ID: 2dxs). Results generated from the ligand-based model were found superior (r2cv values of 0.630 for CoMFA and 0.668 for CoMSIA) to those obtained by the receptor-based model (r2cv values of 0.536 and 0.561 for CoMFA and CoMSIA, respectively). The predictive ability of the models was validated using a structurally diversified test set of 22 compounds that had not been included in a preliminary training set of 45 compounds. The predictive r2 values for the ligand-based CoMFA and CoMSIA models were 0.734 and 0.800, respectively, while the corresponding predictive r2 values for the receptor-based CoMFA and CoMSIA models were 0.538 and 0.639, respectively. The greater potency of the tryptophan derivatives over that of the tyrosine derivatives was interpreted based on CoMFA steric and electrostatic contour maps. The CoMSIA results revealed that for a NS5B inhibitor to have appreciable inhibitory activity it requires hydrogen bond donor and acceptor groups at the 5-position of the indole ring and an R substituent at the chiral carbon, respectively. Interpretation of the CoMFA and CoMSIA contour maps in context of the topology of the allosteric binding site of NS5B provided insight into NS5B-inhibitor interactions. Taken together, the present 3D QSAR models were found to accurately predict the HCV NS5B polymerase inhibitory activity of structurally diverse test set compounds and to yield reliable clues for further optimization of the benzimidazole derivatives in the data set.     

Polymer microcantilever biochemical sensors with integrated polymer composites for electrical detection

Micro fabricated sensors based on nanomechanical motion with piezoresistive electrical readout have become a promising biochemical sensing tool. The conventional microcantilever materials are mostly silicon-based. The sensitivity of the sensor depends on Young's modulus of the structural material, thickness of the cantilever as well as on the gauge factor of the piezoresistor. UV patternable polymers such as SU-8 have a very low Young's modulus compared to the silicon-based materials. Polymer cantilevers with a piezoresistive material having a large gauge factor and a lower Young's modulus are therefore highly suited for sensing applications. In this work, a spin coatable and photopatternable mixture of carbon black (CB) and SU-8, with proper dispersion characteristics, has been demonstrated as a piezoresistive thin film for polymer microcantilevers. Results on percolation experiments of SU-8/CB composite and fabrication of piezoresistive SU-8 microcantilevers using this composite are presented. With our controlled dispersion experiments, we could get a uniform piezoresistive thin film of thickness less than 1.2 μm and resistivity of 2.7 Ω cm using 10 wt% of CB in SU-8. The overall thickness of the SU-8/composite/SU-8 is approximately 3 μm. We further present results on the electromechanical characterization and biofunctionalization of the cantilever structures for biochemical sensing applications. These cantilevers show a deflection sensitivity of 0.55 ppm/nm. Since the surface stress sensitivity is 4.1 × 10⁻³ [N/m]⁻¹, these cantilevers can well be used for detection of protein markers for pathological applications.     

Experimental Determination of NH3 Solubility in Toluene at Pressures up to 340 kPa at 398 K

Journal of Solution Chemistry - The solubility of ammonia in toluene has been measured at 398&nbsp;K and at pressures up to 340&nbsp;kPa using a static, synthetic and isochoric technique....     

Efficient synthesis of spirooxindole-pyrrolizidines and dispirooxindole-piperazines

A simple and efficient approach for the construction of spirooxindole-pyrrolizidines and dispirooxindole-piperazines by cycloaddition reaction of azomethine ylide generated by isatin and proline has been demonstrated successfully. The formation of two different types of frameworks by two different modes of cycloaddition is explored. The developed protocol highlights simple reaction conditions, easy workup processes, and very good yields of products.     

Active participation of membrane lipids in inhibition of multidrug transporter P-glycoprotein

P-glycoprotein (Pgp) is a major efflux pump in humans, overexpressed in a variety of cancers and associated with the development of multi-drug resistance. Allosteric modulation by various ligands (e.g., transport substrates, inhibitors, and ATP) has been biochemically shown to directly influence structural dynamics, and thereby, the function of Pgp. However, the molecular details of such effects, particularly with respect to the role and involvement of the surrounding lipids, are not well established. Here, we employ all-atom molecular dynamics (MD) simulations to study the conformational landscape of Pgp in the presence of a high-affinity, third-generation inhibitor, tariquidar, in comparison to the nucleotide-free (APO) and the ATP-bound states, in order to characterize the mechanical effects of the inhibitor that might be of relevance to its blocking mechanism of Pgp. Simulations in a multi-component lipid bilayer show a dynamic equilibrium between open(er) and more closed inward-facing (IF) conformations in the APO state, with binding of ATP shifting the equilibrium towards conformations more prone to ATP hydrolysis and subsequent events in the transport cycle. In the presence of the inhibitor bound to the drug-binding pocket within the transmembrane domain (TMD), Pgp samples more open IF conformations, and the nucleotide binding domains (NBDs) become highly dynamic. Interestingly, and reproduced in multiple independent simulations, the inhibitor is observed to facilitate recruitment of lipid molecules into the Pgp lumen through the two proposed drug-entry portals, where the lipid head groups from the cytoplasmic leaflet penetrate into and, in some cases, translocate inside the TMD, while the lipid tails remain extended into the bulk lipid environment. These “wedge” lipids likely enhance the inhibitor-induced conformational restriction of the TMD leading to the differential modulation of coupling pathways observed with the NBDs downstream. We suggest a novel inhibitory mechanism for tariquidar, and potentially for related third-generation Pgp inhibitors, where lipids are seen to enhance the inhibitory role in the catalytic cycle of membrane transporters.

Lipid invasion of P-glycoprotein, enhanced by binding of an inhibitor.