Synthesis of N-substituted-2-aminobenzothiazoles using nano copper oxide as a recyclable catalyst under ligand-free conditions in reusable PEG-400 medium

A simple and practical method for the synthesis of N-substituted-2-aminobenzothiazoles via a crosscoupling reaction of 2-iodo anilines with isothiocyanates is envisaged using nano copper oxide as a recyclable catalyst and Cs2CO3as a base in PEG-400,as a bio-degradable,reusable,inexpensive and nontoxic reaction medium,under ligand-free conditions.The present tandem process underlines environmental acceptability to access a wide range of N-substituted-2-aminobenzothiazoles in good to excellent yields.     

Effect of Acetonitrile on the Colloidal Behavior of Conventional Cationic Surfactants: A Combined Conductivity,Surface Tension,Fluorescence and FTIR Study

A comprehensive study the effect of acetonitrile (ACN) with four cationic surfactants, viz. tetradecyltrimethylammonium bromide (TTAB), cetyltrimethylammonium bromide (CTAB), cetylpyridinium chloride (CPC) and cetylpyridinium bromide (CPB) was made by using the conductivity, surface tension, fluorescence and FTIR techniques. Significant micellar, interfacial and thermodynamic properties were studied by the tensiometeric and conductivity methods. The critical micelle concentration (CMC), aggregation number (Nagg), and Stern–Volmer constants (Ksv) have also been studied by the steady state fluorescence method using pyrene as probe. The fluorescence study also supports the CMC results obtained from conductivity and surface tension. FTIR was used to ascertain that the strength of intermolecular interactions such as hydrogen bonding, ion–ion pair interactions and induced dipole interactions between the surfactants and ACN depend upon the head-group of the surfactants. The interaction of surfactants with ACN is energetically favorable and occurs via direct interactions between the surfactants and ACN. The results further revealed that the strength of interactions between the surfactants and ACN follows the order: TTAB > CTAB > CPC > CPB.     

The effect of incorporation of ferrous titanate nanoparticles in sulfonated poly(ether ether ketone)/poly (amide imide) acid-base polymer for cations exchange membrane fuel cells

Journal of Solid State Electrochemistry - The sulfonated poly(ether ether ketone) (SPEEK) is one of the most promising aromatic proton exchange polymer membranes concerning fluorinated aliphatic...     

Nickel‐Catalyzed α‐Carbonylalkylarylation of Vinylarenes: Expedient Access to γ,γ‐Diarylcarbonyl and Aryltetralone Derivatives

We report a Ni‐catalyzed regioselective α‐carbonylalkylarylation of vinylarenes with α‐halocarbonyl compounds and arylzinc reagents. The reaction works with primary, secondary, and tertiary α‐halocarbonyl molecules, and electronically varied arylzinc reagents. The reaction generates γ,γ‐diarylcarbonyl derivatives with α‐secondary, tertiary, and quaternary carbon centers. The products can be readily converted to aryltetralones, including a precursor to Zoloft, an antidepressant drug.     

Nickela‐electrocatalyzed Mild C−H Alkylations at Room Temperature

Direct alkylations of carboxylic acid derivatives are challenging and particularly nickel catalysis commonly requires high reaction temperatures and strong bases, translating into limited substrate scope. Herein, nickel‐catalyzed C?H alkylations of unactivated 8‐aminoquinoline amides have been realized under exceedingly mild conditions, namely at room temperature, with a mild base and a user‐friendly electrochemical setup. This electrocatalyzed C?H alkylation displays high functional group tolerance and is applicable to both the primary and secondary alkylation. Based on detailed mechanistic studies, a nickel(II/III/I) catalytic manifold has been proposed.     

Estimation of coefficient of variation in a weighted inverse Gaussian model

The coefficient of variation is an important parameter in many physical, biological and medical sciences. In this paper we study the estimation of the square of the coefficient of variation in a weighted inverse Gaussian model which is a mixture of the inverse Gaussian and the length biased inverse Gaussian distribution. This represents a rich family of distributions for different values of the mixing parameter and can be used for modelling various life testing situations. The maximum likelihood as well as the Bayes estimates of the parameters are obtained. These estimates are used to derive the estimates of the square of the coefficient of variation of the model under study. Several important data sets are analysed to illustrate the results. © 1996 John Wiley & Sons, Ltd.     

Simultaneous quantitation of rosuvastatin and gemfibrozil in human plasma by high-performance liquid chromatography and its application to a pharmacokinetic study

A simple, sensitive and specific high-performance liquid chromatography method is described for simultaneous determination of rosuvastatin (RST) and gemfibrozil (GFZ) in human plasma using celecoxib as an internal standard (IS). The assay procedure involved extraction of RST, GFZ and IS from plasma into acetonitrile. Following separation and evaporation of the organic layer the residue was reconstituted in the mobile phase and injected onto an X-Terra C(18) column (4.6 x 150 mm, 5.0 microm). The chromatographic run time was less than 20 min using flow gradient (0.0-1.60 mL/min) with a mobile phase consisting of 0.01 M ammonium acetate:acetonitrile:methanol (50:40:10, v/v/v) and UV detection at 275 nm. Nominal retention times of RST, GFZ and IS were 6.7, 13.9 and 16.4 min, respectively. Absolute recovery of both analytes and IS was greater than 90%. The lower limit of quantification (LLOQ) of RST and GFZ was 0.03 and 0.30 microg/mL, respectively. Linearity was excellent (r(2) = 0.999) in the 0.03-10 microg/mL and 0.3-100 microg/mL ranges for RST and GFZ, respectively. The inter- and intra-day precisions in the measurement of RST quality control (QC) samples 0.03, 0.09, 2.50 and 8.00 microg/mL were in the range 2.37-9.78% relative standard deviation (RSD) and 0.92-10.08% RSD, respectively. Similarly, the inter- and intra-day precisions in the measurement of GFZ quality control (QC) samples 0.30, 0.90, 25.0 and 80.0 microg/mL were in the ranges 2.79-6.27 and 0.96-9.69% RSD, respectively. Accuracies in the measurement of QC samples for RST and GFZ were in the range 85.43-107.23 and 84.98-102.35% respectively, of the nominal values. RST and GFZ were stable in the array of stability studies viz., bench-top, auto-sampler and freeze-thaw cycles. Stability of RST and GFZ was established for 1 month at -80C. The application of the assay in an oral pharmacokinetic study in rats co-administered with RST and GFZ is described.     

Simple method for the determination of rosiglitazone in human plasma using a commercially available internal standard

To the best of our knowledge, bioanalytical methods to determine rosiglitazone in human plasma reported in literature use internal standards that are not commercially available. Our purpose was to develop a simple method for the determination of rosiglitazone in plasma employing a commercially available internal standard (IS). After the addition of celecoxib (IS), plasma (0.25 mL) samples were extracted into ethyl acetate. The residue after evaporation of the organic layer was dissolved in 750 microL of mobile phase and 50 microL was injected on to HPLC. The separation was achieved using a Hichrom KR 100, 250 x 4.6 mm C(18) with a mobile phase composition potassium dihydrogen phosphate buffer (0.01 m, pH 6.5):acetonitrile:methanol (40:50:10, v/v/v). The flow-rate of the mobile phase was set at 1 mL/min. The column eluate was monitored by fluorescence detector set at an excitation wavelength of 247 nm and emission wavelength of 367 nm. Linear relationships (r(2) > 0.99) were observed between the peak area ratio rosiglitazone to IS vs rosiglitazone concentrations across the concentration range 5-1000 ng/mL. The intra-run precision (%RSD) and accuracy (%Dev) in the measurement of rosiglitazone were <+/-10.69 and <-12.35%, respectively across the QC levels (50-1000 ng/mL). The extraction efficiency was >80% for both rosiglitazone and IS from human plasma. The lower limit of quantitation of the assay was 5 ng/mL. In summary, the methodology for rosiglitazone measurement in plasma was simple, sensitive and employed a commercially available IS.     

Adsorption of phosphate from seawater on calcined MgMn-layered double hydroxides

Adsorptive properties of MgMn-3-300 (MgMn-type layered double hydroxide with Mg/Mn mole ratio of 3, calcined at 300 degrees C) for phosphate were investigated in phosphate-enriched seawater with a concentration of 0.30 mg-P/dm3. It showed the highest phosphate uptake from the seawater among the inorganic adsorbents studied (hydrotalcite, calcined hydrotalcite, activated magnesia, hydrous aluminum oxide, manganese oxide (delta-MnO2)). The phosphate uptake by MgMn-3-300 reached 7.3 mg-P/g at an adsorbent/solution ratio of 0.05 g/2 dm3. The analyses of the uptakes of other constituents (Na+, K+, Ca(+, Cl-, and SO(2-)4) of seawater showed that the adsorbent had a markedly high selectivity for the adsorption of phosphate ions. Effects of initial phosphate concentration, temperature, pH, and salinity on phosphate uptake were investigated in detail by a batch method. The phosphate uptake increased slightly with an increase in the adsorption temperature. The adsorption isotherm followed Freundlich's equation with constants of logK(F)=1.25 and 1/n=0.65, indicating that it could effectively remove phosphate even from a solution of markedly low phosphate concentration as well as with large numbers of coexisting ions. The pH dependence showed a maximum phosphate uptake around pH 8.5. The pH dependence curve suggested that selective phosphate adsorption progresses mainly by the ion exchange of HPO(2-)4. The study on the effect of salinity suggested the presence of two kinds of adsorption sites in the adsorbent: one nonspecific site with weak interaction and one specific site with strong interaction. The effective desorption of phosphate could be achieved using a mixed solution of 5 M NaCl + 0.1 M NaOH (1 M = 1 mol/dm3), with negligible dissolution of adsorbent. The adsorbent had high chemical stability against the adsorption/desorption cycle; it kept a good phosphate uptake even after the repetition of the seventh cycle.