Some novel hexa-coordinated cadmium Schiff base complexes: X-ray structure,Hirshfeld surface analysis,antimicrobial and thermal analysis

A series of cadmium (II) complexes with the general formula of CdLX₂, where X = Cl⁻, Br⁻, I⁻, SCN⁻ and N₃⁻ and L is a tetradentate N₄-donor Schiff base ligand; were synthesized by a sonochemical process as a simple, cost effective and environmentally friendly method. The organic ligand was obtained by condensation reaction of triethylenetetraamine (trien) and cinnamaldehyde. The characterization of coordination compounds was carried out by FT-IR, ¹HNMR, ¹³CNMR, UV–visible spectroscopies and then conductivity measurements. The crystal structure of the cadmium azide complex was determined by single crystal X-ray diffraction. This complex crystallizes in the monoclinic space group of C2/c. The cadmium ion is hexa-coordinated by four nitrogen atoms from the tetradendate Schiff base ligand and two terminal azide nitrogen atoms. The crystal packing and Hirshfeld surface analysis of the CdL(N₃)₂ complex indicates the essential role of intermolecular interactions related to azido groups in the formation of supramolecular structure. The thermal behavior of complexes was studied by TG/DTG analysis. Moreover, an antibacterial bioassay of the cadmium complexes has been performed in vitro against two gram-positive (Staphylococcus aureus and Bacillus subtilis) and two gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacterial strains. Furthermore antifungal activities of the compounds against two fungal strains of Aspergilus niger and Candida albicans were also investigated.     

Nano-structured lead dioxide as a novel stationary phase for solid-phase microextraction

The first study on the high efficiency of nano-structured lead dioxide as a new fiber for solid-phase microextraction (SPME) purposes has been reported. The size of the PbO2 particles was in the range of 34-136 nm. Lead dioxide-based fibers were prepared via electrochemical deposition on a platinum wire. The extraction properties of the fiber to benzene, toluene, ethylbenzene, and xylenes (BTEX) were examined using headspace solid-phase microextraction (HS-SPME) mode coupled to gas chromatography-flame ionization detection (GC-FID). The results obtained proved the suitability of proposed fibers for the sampling of organic compounds from water. The extraction procedure was optimized by selecting the appropriate extraction parameters, including preparation conditions of coating, salt concentration, time and temperature of adsorption and desorption and stirring rate. The calibration graphs were linear in a concentration range of 0.1-100 microg l(-1) (R2 > 0.994) with detection limits below 0.012 microg l(-1) level. Single fiber repeatability and fiber-to-fiber reproducibility were less than 10.0 and 12.5%, respectively. The PbO2 coating was proved to be very stable at relatively high temperatures (up to 300 degrees C) with a high extraction capacity and long lifespan (more than 50 times). Higher chemical resistance and lower cost are among the advantages of PbO2 fibers over commercially available SPME fibers. Good recoveries (81-108%) were obtained when environmental samples were analyzed.     

In‐vitro Aluminum Determination and Preconcentration in Blood of Dialysis Patients Based on Ionic Liquid Dispersive Liquid‐Liquid Biomicroextraction by 2‐Amino‐3‐(1H‐imidazol‐4‐yl)propanoic Acid

In this study, trace amounts of aluminum in serum of dialysis patients were chelated with 2‐Amino‐3‐(1H‐imidazol‐4‐yl)propanoic acid (Histidine) and determined by electro‐thermal atomic absorption spectrometry (ETAAS). A fast and efficient method based on ionic liquid dispersive liquid‐liquid bio‐micro‐extraction (IL‐DLLBME) was developed for the determination of Al cation in human blood serum samples. In this work, a small amount of 1‐Hexyl‐3‐methylimmidazolum hexafluorophosphate ([HMIM] [PF₆]) as an extractant solvent was dissolved in acetone as a dispersant solvent and then the binary solution was rapidly injected by a syringe into the serum containing Al³⁺,Which have already in‐vitro chelated by Histidine amino acid (Al‐His) at pH = 6.5. After separation, the settled IL‐phase was dissolved in ethanol up to 200 μL and 20 μL of samples injected into the ET‐AAS by auto‐sampler. Various parameters have been studied and optimized for 10 mL of sample. Under the optimum conditions, the enrichment factor (EF), limit of detection (LOD) and working range (peak area mode) were obtained 53, 15 ng L^?1 and 0.05‐4.1 μg L^?1 respectively. In vitro Al chelation showed that His can significantly decrease aluminum concentration in serum of dialysis patients. Validation of methodology was confirmed by standard reference material (SRM).     

Influence of copper substitution on the interaction of ethylene over iron clusters: a theoretical study

We report the results of density functional theory (DFT) calculations of ethylene adsorption over the most stable pure and bimetallic clusters of Fe(n)Cu(m) (2 ≤ m+n ≤ 4), in two adsorption modes of π and di-σ. Our results show that the quality of interaction of ethylene with iron center in bimetallic clusters of iron-copper is characteristically different from what is found over pure iron. Over the range of our studies for dimers, trimers, and tetramers, whether for π or di-σ mode, alloying iron clusters results in a substantial improvement in adsorption of ethylene over cluster and exhibits a notable increase in binding and interaction energies compared with pure iron clusters. One of the interesting features of this adsorption is that ethylene never orients toward di-σ mode for Cu-Cu or Fe-Cu bonds, and π orientation is strongly preferred. Ethylene adsorption in di-σ coordination is accompanied by the sever restructuring, larger deformation energy, and the larger interaction energy. In the next part, we answer this question of how electronic perturbations induced by copper atoms can enhance the activity of iron toward ethylene. This interpretation is done within the framework of natural bond orbital (NBO) and natural resonance theory (NRT) analyses. Different reaction pathways detected by NRT analysis (donor-acceptor, metallacyclic, and carbanion) reveal interesting aspects of differences between the nature of metal-alkene coordination in bimetallic and purely metallic clusters.     

Synthesis of new derivatives of 3‐aryl‐1,5‐dimethyl‐1H‐[1,2,4]triazolo[4′,3′:1,2]pyrimido[4,5‐e][1,3,4]oxadiazines as potential antiproliferative agents

Starting from pyrimido[4,5‐e][1,3,4]oxadiazines ( 3a , 3b , 3c ) , a synthetic pathway to [1,2,4]triazolo[4′,3′:1,2]pyrimido[4,5‐e][1,3,4]oxadiazines ( 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i ) is described. The reaction of pyrimido[4,5‐e][1,3,4]oxadiazines ( 3a , 3b , 3c ) with hydrazine hydrate afforded the corresponding hydrazino derivatives ( 4a , 4b , 4c ) . Further treatment of these compounds with different orthoesters in acetic acid gave the corresponding [1,2,4]triazolo[4′,3′:1,2]pyrimido[4,5‐e][1,3,4]oxadiazines ( 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i ) . Compound ( 3a ) and ( 5b ) , as examples, were tested on different cancer cell lines including HeLa, MCF‐7, and HepG2. Malignant cells were cultured in DMEM medium and incubated with different concentrations of the titled compounds. Cell viability was quantitated by MTT assay. J. Heterocyclic Chem., (2010).     

Speciation and Determination of Trace Amount of Inorganic Arsenic in Water,Environmental and Biological Samples

A new speciation and preconcentration method based on dispersive liquid‐liquid microextraction has been developed for trace amounts of As(III) and As(V) in urine and water samples. At pH 4, As(III) is complexed with ammoniumpyrrolidine dithiocarbamate and extracted into 1‐Hexyl‐3‐methylimidazolium hexafluorophosphate, as an ionic liquid (IL) and As(III) is determined by electrothermal atomic absorption spectrometery (ETAAS). Arsenic(V) in the mixing solution containing As(III) and As(V) was reduced by using KI and ascorbic acid in HCl solution and then the procedure was applied to determination of total arsenic. Arsenic(V) was calculated as the difference between the total arsenic content and As(III) content. The effect of various parameters on the recovery of the arsenic ions has been studied. Under the optimum conditions, the enrichment factor 135 was obtained. The proposed method was successfully applied to the determination of trace amounts of As(III) and As(V) in water and biological samples.     

Synthesis and Characterization of O,S-Dimethylphosphoramidothioate and N-Acetyl O,S-Dimethylphosphoramidothioate

O,S-Dimethylphosphoramidothioate (methamidophos) and N-acetyl O,S-dimethylphos- phoramidothioate (acephate) were synthesized by new methods to investigate the structure–activity study of acetyl cholinesterase (AChE) inhibition through the parameters of logP, δ ³¹P, and IC₅₀. After their characterization by NMR (³¹P, ³¹P{ ¹H}, ¹³C, and ¹H), IR, and mass spectroscopy, logP and δ ³¹P (³¹P chemical shift in NMR) were used to evaluate lipophilicity and electronical properties. The logP values for methamidophos and acephate were experimentally determined by the GC-shake-flask method, and the ability of the compounds to inhibit human AChE was evaluated by a modified Ellman's assay.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Polysulfone/Brij‐58 blend nanofiltration membranes: preparation,morphology and performance

In present research, novel asymmetric polysulfone (PSF) membranes with high hydrophilicity and noticeable rejection of arsenic, as one of the major environmental problems, were prepared from PSF/Brij‐58/NMP (1‐methyl‐2‐pyrrolidone) system via immersion precipitation. Pure water was used as gelation media. The variation effect of coagulation bath temperature (CBT) and addition of Brij‐58 on morphology, wettabiliy, pure water permeation flux and rejection of As (III) and As (V), as two dominant states of arsenic in the nature, were studied by scanning electron microscopy, contact angle measuring instrument and experimental setup. The results demonstrated that both hydrophilicity and rejection properties of the prepared membranes were significantly enhanced by small addition of Brij‐58 surfactant in the casting solution along with using the lowest level of CBT. Addition of 4 wt. % of Brij‐58 and using cold coagulation bath resulted in the highest rejection of As (V). Initial increase in Brij‐58 concentration, from 0 wt. % to 2 wt. %, resulted in higher rejection of As (III). However, higher Brij‐58 concentrations than 2 wt. % (increase from 2 wt. % to 6 wt. %) led to lower rejection of As (III). Also, it was found out that addition of Brij‐58 in the casting solution along with increasing the CBT resulted in formation of membranes with high permeability and sub‐layer porosity and thin top layer. Copyright © 2012 John Wiley & Sons, Ltd.     

Multiplexed Discrimination of Single Amino Acid Residues in Polypeptides in a Single SERS Hot Spot

The SERS‐based detection of protein sequences with single‐residue sensitivity suffers from signal dominance of aromatic amino acid residues and backbones, impeding detection of non‐aromatic amino acid residues. Herein, we trap a gold nanoparticle in a plasmonic nanohole to generate a single SERS hot spot for single‐molecule detection of 2 similar polypeptides (vasopressin and oxytocin) and 10 distinct amino acids that constitute the 2 polypeptides. Significantly, both aromatic and non‐aromatic amino acids are detected and discriminated at the single‐molecule level either at individual amino acid molecules or within the polypeptide chains. Correlated with molecular dynamics simulations, our results suggest that the signal dominance due to large spatial occupancy of aromatic rings of the polypeptide sidechains on gold surfaces can be overcome by the high localization of the single hot spot. The superior spectral and spatial discriminative power of our approach can be applied to single‐protein analysis, fingerprinting, and sequencing.     

Differential pulse anodic stripping voltammetric determination of lead(II) with a 1,4-bis(prop-2'-enyloxy)-9,10-anthraquinone modified carbon paste electrode

A sensitive and selective method for the determination of lead(II) with a 1,4-bis(prop-2'-enyloxy)-9,10-anthraquinone (AQ) modified carbon paste electrode has been developed. The method is based on non-electrolytic preconcentration via complex formation with modifier, followed by an accumulation period with a negative potential (-1.5 V), and then by a proper anodic stripping. The analytical performance was evaluated with respect to the quantity of modifier in the paste, concentration of electrolyte solution, preconcentration time, lead(II) concentration, and other variables. A linear calibration graph was obtained in the concentration range 2.00x10(-9)-1.06x10(-5) M Pb(II) (n=21, r=0.9999) with 30 s preconcentration time. The detection limit was found to be 1x10(-9) M. For eight preconcentration/determination cycles, the differential pulse voltammetric response was reproduced with 5.0 and 3.7% relative standard deviations at 2.00x10(-8) and 2.00x10(-6) M Pb(II), respectively. Rapid and convenient renewal of electrode surface allows the use of a single modified electrode surface in multiple analytical determinations over several weeks. Many coexisting metal ions had little or no effect on the determination of lead(II). The developed method was applied to lead determination in waste waters.