An activated sulfonylating agent that undergoes general base-catalyzed hydrolysis by amines in preference to aminolysis

Activated sulfonyl derivatives, similar to acyl ones, usually undergo aminolysis with amines in water as nucleophilic attack by the amine is preferred to hydrolysis. However, despite being active sulfonyl derivatives, four-membered heterocyclic sulfonamides, beta-sultams, do not undergo aminolysis in aqueous solution but preferentially react to give hydrolysis products only. The rate of the reaction of beta-sultams in buffered solutions of simple primary amines shows a first-order dependence on amine concentrations attributed to general base-catalyzed hydrolysis by the amine. Even N-benzyl-4,4-dimethyl-3-oxo-beta-sultam, which is both a beta-sultam and a beta-lactam, undergoes hydrolysis at the sulfonyl center rather than aminolysis at either the sulfonyl or acyl center. The solvent kinetic isotope effects (SKIE, k(H(2)O)/k(D(2)O)) for the amine-catalyzed hydrolyses are 1.4 and 1.9 for the hydrolysis of N-benzoyl-beta-sultam and N-benzyl-4,4-dimethyl-3-oxo-beta-sultam, respectively, compatible with a general base-catalyzed mechanism. The amine-catalyzed hydrolysis gives a Bronsted beta value of +0.9 for both N-benzoyl beta-sultam and N-benzyl-4,4-dimethyl-3-oxo-beta-sultam, indicating that the general base amine is almost fully protonated in the transition state. A general base-catalyzed mechanism for hydrolysis rather than nucleophilic attack was also deduced for the reaction of N-benzyl-4,4-dimethyl-3-oxo-beta-sultam with carboxylate anions based on a SKIE of 1.7-1.9 and rate constants which fit the Bronsted plot for amines. In contrast to acyl transfer reactions, those for sulfonyl transfer appear to show an inverse reactivity-selectivity relationshipthe most active compounds being the most selective. The lack of reactivity of beta-sultams toward amine nucleophiles appears to be related to the mechanism of ring opening of beta-sultams with a decreased reactivity toward amines relative to hydroxide ion, probably related to the expulsion of the relatively poor leaving group amide anion.     

SERRS immunoassay for quantitative human CRP analysis

SERRS has been used for the first time for the measurement of C-reactive protein (CRP) in an immunoassay. CRP, a biological marker for the diagnosis of infection and inflammation, is quantified in an ELISA using conventional reagents, but the usual colorimetric detection step is replaced by SERRS detection, offering improved sensitivity and potential for multiplexing analysis.     

On the Generalized Cartan Matrices Arising from k-th Yau Algebras of Isolated Hypersurface Singularities

Algebras and Representation Theory - Let (V,0) be an isolated hypersurface singularity defined by the holomorphic function $f: (mathbb {C}^{n}, 0)rightarrow (mathbb {C}, 0)$ . The k-th Yau...     

Fabrication,rheological analysis,and in vitro characterization of in situ chemically cross‐linkable thermogels as controlled and prolonged drug depot for localized and systemic delivery

5‐Fluorouracil (5‐FU) is widely used against many types of solid cancer in clinics. However, because of its limitations such as short half‐life, poor oral absorption and rapid clearance by dihydropyrimidine dehydrogenase have limited its applications. In current study, new in situ chemically grafted thermogels for prolonged drug release are formed on the basis of poloxamer 407 (PF127) and carboxymethyl chitosan (CMCS) using glutaraldehyde as cross‐linking agent. The phase transition from sol to gel state at body temperature was confirmed by tube titling, rheological analysis, and optical transmittance determinations. Swelling and drug release experiments conducted at various pH and temperature demonstrated that developed formulations are thermoresponsive with maximum swelling and release below critical gelation temperature (CGT) (pH 7.4, 25°C). Cells growth inhibition study confirmed the biocompatibility of thermogels against L929 cell lines. Methyl thiazolyl tetrazolium (MTT) assay confirmed that 5‐FU–loaded thermogels have the potential to cause cells death against HeLa and MCF‐7 cancer lines. The IC₅₀ values calculated for pure 5‐FU solution (27 ± 0.81 μg/mL for HeLa and 24 ± 0.58 μg/mL for MCF‐7) were found higher in comparison with 5‐FU–loaded thermogels, against HeLa (17 ± 0.39 μg/mL) and MCF‐7 (14 ± 0.67 μg/mL). Fourier transform infrared (FTIR) confirmed the new structure formation and chemical grafting between PF127 and CMCS. Thermogravimetric (TG) and differential scanning calorimetry (DSC) analyses proved the phase transition around physiologic temperature range, while scanning electron microscopy (SEM) analysis displayed the presence of connected pores in the cross section of thermogels facilitating the uptake of solvents and drug particles. Altogether, results concluded that developed chemically grafted thermogels can be used in vivo for prolonged drug release after subcutaneous administration.     

One-Pot Synthesis of Heterobimetallic Metal–Organic Frameworks (MOFs) for Multifunctional Catalysis

A one-pot synthesis of bimetallic metal–organic frameworks (Co/Fe-MOFs) was achieved by treating stoichiometric amounts of Fe and Co salts with 2-aminoterephthalic acid (NH₂-BDC). Monometallic Fe (catalyst A) and Co (catalyst F) were also prepared along with mixed-metal Fe/Co catalysts (B–E) by changing the Fe/Co ratio. For mixed-metal catalysts (B–E) SEM energy-dispersive X-ray (EDX) analysis confirmed the incorporation of both Fe and Co in the catalysts. However, a spindle-shaped morphology, typically known for the Fe-MIL-88B structure and confirmed by PXRD analysis, was only observed for catalysts A–D. To test the catalytic potential of mixed-metal MOFs, reduction of nitroarenes was selected as a benchmark reaction. Incorporation of Co enhanced the activity of the catalysts compared with the parent NH₂-BDC-Fe catalyst. These MOFs were also tested as electrocatalysts for the oxygen evolution reaction (OER) and the best activity was exhibited by mixed-metal Fe/Co-MOF (Fe/Co batch ratio=1). The catalyst provided a current density of 10 mA cm⁻² at 410 mV overpotential, which is comparable to the benchmark OER catalyst (i.e., RuO₂). Moreover, it showed long-term stability in 1 m KOH. In a third catalytic test, dehydrogenation of sodium borohydride showed high activity (turnover frequency=87 min⁻¹) and hydrogen generation rate (67 L min⁻¹ g⁻¹ catalyst). This is the first example of the synthesis of bimetallic MOFs as multifunctional catalysts particularly for catalytic reduction of nitroarenes and dehydrogenation reactions.     

Recent progress in EPR study of spin labeled polymers and spin probed polymer systems

The EPR technique is commonly used for the detection and characterization of paramagnetic centers in chemical science. This method can provides a lot of information, such as identity, structure, dynamics, interaction, orientation, glass transition temperature, adsorption behavior, functionality, phase behavior, nano-inhomogeneities, and conformation of the free-radical portion of the polymer chain. Most polymers intrinsically possess diamagnetic properties, so in order to study polymers with EPR, paramagnetic centers need to be incorporated into the polymer systems. Spin labeling and spin probing are main methods of covalently attaching paramagnetic centers to polymer chains or embedding them in polymer matrices through non-covalent interactions, respectively. Spin labeling and spin probing techniques for polymers and polymer systems (especially with nitroxide radicals) have also been studied, which have a profound impact on polymer science. This review focuses on the continuous wave EPR technique and introduces the recent advances in spin labeled polymers and spin probed polymer systems in EPR research.     

Insecticidal amides from fruits of Piper nigrum Linn

The petroleum ether and ethyl acetate fractions of dried ground seeds of Piper nigrum Linn. afforded sixteen compounds (1-16) including one new insecticidal amide, pipwaqarine (1) and six constituents (3,4,6,7,11,15) previously unreported from this plant. The structure of (1) has been elucidated through extensive 1D-, 2D-NMR spectral studies as, 1-[13-(3',4'-methylenedioxyphenyl)-2E,4E,12E-tridecatrienoyl]-N-isopentylamide, while those of known constituents through comparison of spectral data. 1 exhibited toxicity of 30ppm against fourth instar larvae of Aedes aegypti Liston determined by WHO method. A portion of petroleum ether fraction was also subjected to GC and GC-MS analysis resulting in the identification of three compounds (17-19) using the NIST Mass spectral search program 1998 and Kovat's retention indices. Two of these compounds, 17 and 18, are reported for the first time from this plant.     

Parallel Planar Heterojunction Strategy Enables Sb2S3 Solar Cells with Efficiency Exceeding 8 %

Solution-processed solar cells based on inorganic heterojunctions provide a potential approach to the efficient, stable and low-cost solar cells required for the terrestrial generation of photovoltaic energy. Antimony trisulfide (Sb₂S₃) is a promising photovoltaic absorber. Here, an easily solution-processed parallel planar heterojunction (PPHJ) strategy and related principle are developed to prepare efficient multiple planar heterojunction (PHJ) solar cells, and the PPHJ strategy boosts the efficiency of solution-processed Sb₂S₃ solar cells up to 8.32 % that is the highest amongst Sb₂S₃ devices. The Sb₂S₃-based PPHJ device consists of two kinds of conventional planar heterojunction (PHJ) subcells in a parallel connection: Sb₂S₃-based PHJ subcells dominating the absorption and charge generation and CH₃NH₃PbI₃-based PHJ subcells governing the electron transport towards collection electrode, but it belongs to an Sb₂S₃ device in nature. The resulting PPHJ device combines together the distinctive structural features of Sb₂S₃ absorbing layer as a main absorber and the duplexity of well-crystallized/oriented CH₃NH₃PbI₃ layer in charge transportation as an additional absorber, while the presence of perovskite does not affect device stability. The PPHJ strategy maintains the facile preparation by the conventional sequential depositions of multiple layers, but eliminates the normal complexity in both tandem and parallel tandem PHJ systems.