Antimicrobial and anticancer activities of Schiff base ligand and its transition metal mixed ligand complexes with heterocyclic base

A new Schiff base ligand (HL) was prepared via a condensation reaction of quinoline‐2‐carboxaldhyde with 2‐aminophenol in a molar ratio of 1:1. Its transition metal mixed ligand complexes with 1,10‐phenanthroline (1,10‐phen) as co‐ligand were also synthesized in a 1:1:1 ratio. HL and its mixed ligand complexes were characterized using elemental analysis, infrared, ¹H NMR, mass and UV–visible spectroscopies, molar conductance, magnetic measurements, solid reflectance, thermal analysis, electron spin resonance and X‐ray diffraction. Molar conductance measurements showed that all complexes have an electrolytic nature, except Cd(II) complex. From elemental and spectral data, the formulae [M(L)(1,10‐phen)(H₂O)]Cl_x?nH₂O (where M = Cr(III) (x = n = 2), Mn(II) and Ni(II) (x = 1, n = 2), Fe(III) (x = n = 2), Co(II), Cu(II) and Zn(II) (x = 1, n = 2)) and [Cd(L)(1,10‐phen)Cl]?3H₂O for the metal complexes have been proposed. The geometric structures of complexes were found to be octahedral. Powder X‐ray diffraction reflected the crystalline nature of the complexes; however, the Schiff base is amorphous. HL and its mixed ligand complexes were screened against Gram‐positive bacteria (Streptococcus pneumoniae and Bacillus subtilis) and Gram‐negative bacteria (Pseudomonas aeruginosa and Escherichia coli). Antifungal activity was determined against Aspergillus fumigatus and Candida albicans, the data showing that most complexes had activity less than that of the Schiff base while Mn(II), Fe(III) and Ni(II) complexes showed no significant antifungal activity. The anticancer activity of HL and its metal complexes was also studied against breast and colon cell lines. The metal complexes showed IC₅₀ higher than that of HL, especially the Cu(II) complex which showed the highest IC₅₀ against breast cell line.     

Effect of Dissolved Oxygen Tension and Agitation Rates on Sulfur-Utilizing Autotrophic Denitrification: Batch Tests

The effect of dissolved oxygen (DO) and agitation rate in open and closed reactors was examined for sulfur-utilizing autotrophic denitrification. The reaction rate constants were determined based on a half-order kinetic model. Declining denitrification rate constants obtained for open reactors those of 8.46, 8.03, and 2.18 for 50 mg NO₃ ^?-N/L, while 11.12, 9.14, and 0.12 mg^1/2/L^1/2?h were for 100 mg NO₃ ^?-N/L at agitation speeds of 0, 100, and 200 rpm. In closed reactors, the ever-increasing denitrification rates were 10.13, 22.56, and 37.03, whereas for the same nitrate concentrations and speeds the rates were 13.17, 15.63, and 26.67 mg^1/2/L^1/2?h. The rate constants correlated well (r ² ?=?0.89–0.99) with a half-order kinetic model. In open reactors, high SO₄ ^2?/N ratios (8.02–75.10) while in closed reactors comparatively low SO₄ ^2?/N ratios (6.10–13.39) were obtained. Sulfur oxidation occurred continuously in the presence of DO, resulting in mixed cultures acclimated to sulfur and nitrate. SO₄ ^2? was produced as an end product, which reduced alkalinity and lowered pH over time. Furthermore, DO inhibited sulfur denitrification in open reactors, while agitation in closed reactors increased the rate of denitrification.     

Mechanistic Insights into a Sustainable Mechanochemical Synthesis of Ettringite

Mechanochemistry offers an environmentally benign and facile synthesis method for a variety of cement paste constituents. In addition, these methods can be used to selectively tune the properties of cement components. The mineral ettringite is an important component of cementitious materials and has additional technological potential due to its ion exchange properties. Synthesis of ettringite via mechanochemistry is an environmentally friendly alternative to conventional wet-chemical synthesis established in industry. This contribution explores the mechanism of a two-step mechanochemical synthesis of ettringite, which was previously found to greatly improve the reaction conversion as compared with one-pot synthesis. The crystallinity of Al(OH)₃ was found to decrease during the first stage of this mechanochemical synthesis. This was correlated to a significant decrease in the particle size of Al(OH)₃ in this stage. No other significant changes were found for the other components, suggesting that mechanochemical activation of Al(OH)₃ is responsible for the enhanced formation of ettringite by the two-step approach. The environmentally friendly approach developed for ettringite synthesis offers a versatile synthetic strategy, which can be applied to synthesise further cementitious materials.     

Aminomethyl Transfer (Mannich) Reactions Between an O-Triethylsilylated Hemiaminal and Anilines,RnC6H5−nNH2 Leading to New Diamines,Triamines, Imines,or 1,3,5-Triazines Dependent upon Substituent R

The reactions of the Mannich reagent Et₃SiOCH₂NMe₂ ( 1 ) with a variety of anilines (mono-substituted RC₆H₄NH₂, R=H, 4-CN, 4-NO₂, 4-Ph, 4-Me, 4-MeO, 4-Me₂N; di-substituted R₂C₆H₃NH₂, R₂=3,5-(CH₃)₂, 3,5-(CF₃)₂; tri-substituted R₃C₆H₂NH₂, R₃=3,5-Me₂-4-Br and a “super bulky” aniline (Ar*NH₂) [Ar*=2,6-bis(diphenylmethyl)-4-tert-butylphenyl]) led to the formation of a range of products dependent upon the substituent. With electron-withdrawing substituents, previously unknown diamines, RC₆H₄NH(CH₂NMe₂) [R=CN ( 2 a ), NO₂ ( 2 b )] and R₂C₆H₃NH(CH₂NMe₂) [R₂=3,5-(CF₃)₂ ( 2 c) ] were formed. Further reaction of 2 a , b , c with 1 yielded the corresponding triamines RC₆H₄N(CH₂NMe₂)₂ (R=CN ( 3 a ), NO₂ ( 3 b ) and R₂C₆H₃N(CH₂NMe₂)₂, R₂=3,5-(CF₃)₂ ( 3 c ). The new polyamines were characterized by NMR spectroscopy, and for 2 a , 2 c _, and 3 c , by single crystal XRD. In the case of electron-donating groups, R=4-OMe, 4-NMe₂, 4-Me, 3,5-Me₂, 3,5-Me₂-4-Br, and for R=4-Ph, the reactions with 1 immediately led to the formation of the related 1,3,5-triazines, R=4-MeO ( 5 a ), 4-Me₂N ( 5 b ), 4-Me ( 5 c ), 3,5-Me₂ ( 5 d ), 3,5-Me₂-4-Br ( 5 e ), 4-Ph ( 5 f ), 4-Cl ( 5 g ). The “super bulky” aniline rapidly produced a single product, namely the corresponding imine Ar*N=CH₂ ( 4 ) which was also characterized by single crystal XRD. Imine 4 is both thermally and oxidatively stable. All reactions are very fast, thus based upon the presence of Si we are tempted to denote the reactions of 1 as examples of “Silick” chemistry.     

Validated ecofriendly chromatographic method for quantitative determination of anti‐migraine quaternary mixture

A novel ecofriendly, cost and time saving high‐performance thin‐layer chromatographic method was developed and validated for simultaneous determination of metoclopramide, ergotamine, caffeine, and paracetamol in bulk and pharmaceutical formulation. The separation was carried out on silica gel plates, using ethyl acetate:ethanol:ammonia (9:1:0.1, v/v/v) as a developing system. Ultraviolet detection was carried out at 272 nm. The resulting retention times were 0.15, 0.36, 0.49, and 0.74 min for metoclopramide, ergotamine, caffeine, and paracetamol, respectively. The greenness profile assessment was achieved to the proposed method to evaluate its greenness characters to the environment with acceptable results. Validation parameters were checked according to International Conference of Harmonization guidelines to achieve the international requirements for quality control analysis of the proposed drugs.     

Complexes of Low Oxidized 99Tc and Re with Thiosalicylic Acid and Their Characterization in Solution with Some CNDO-MO Calculations

Complexation of technetium-99 and rhenium in low oxidized forms with thiosalicylic acid (TSA) were investigated by uv.-vis. spectrophotometry and HPL-chromatography.

By CNDO-MO calculations of the proper structure of TSA, the charge densities, ionization potential, electron affinity and its dipole moment were studied. The violet solútions of the Tc and Re complexes exhibit characteristic bands in the visible at 420,590 nm and 410,570 nm respectively. Comparative HPLC studies using MeOH/H₂O as a mobile phase indicate the Re-TSA complex to be less stable than the Tc-TSA complex.     

Densities,Refractive Indices,Ultrasonic Speeds and Excess Properties of Acetonitrile + Poly(ethylene glycol) Binary Mixtures at Temperatures from 298.15 to 313.15 K

The densities, ρ, refractive indices, n _D, and ultrasonic speeds, u, of binary mixtures of acetonitrile (AN) with poly(ethylene glycol) 200 (PEG200), poly(ethylene glycol) 300 (PEG300) and poly(ethylene glycol) 400 (PEG400) were measured over the entire composition range at temperatures (298.15, 303.15, 308.15 and 313.15) K and at atmospheric pressure. From the experimental data, the excess molar volumes, \( V_{\text{m}}^{\text{E}} \) , deviations in refractive indices, \( \Delta n_{\text{D}} \) , excess molar isentropic compressibility, \( K_{{s , {\text{m}}}}^{\text{E}} \) , excess intermolecular free length, \( L_{\text{f}}^{\text{E}} \) , and excess acoustic impedance, Z ^E, have been evaluated. The partial molar volumes, \( \overline{V}_{\text{m,1}} \) and \( \overline{V}_{\text{m,2}} \) , partial molar isentropic compressibilities, \( \overline{K}_{{s , {\text{m,1}}}} \) and \( \overline{K}_{{s , {\text{m,2}}}} \) , and their excess values over whole composition range and at infinite dilution have also been calculated. The variations of these properties with composition and temperature are discussed in terms of intermolecular interactions in these mixtures. The results indicate the presence of specific interactions among the AN and PEG molecules, which follow the order PEG200 < PEG300 < PEG400.     

Determination of Lambda-Cyhalothrin and Malathion Residues in Locust by Gas Chromatography with Electron Capture Detection

Journal of Analytical Chemistry - A reliable, easy, and reproducible method was developed for the quantification of λ-cyhalothrin and malathion residues in desert locust. For the extraction, a...